lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKv+Gu89B-E+L2qybT9n5j72c+1vm1az4H9Cp7E71aP3i3VE6A@mail.gmail.com>
Date:   Tue, 1 May 2018 11:54:12 +0200
From:   Ard Biesheuvel <ard.biesheuvel@...aro.org>
To:     Shunyong Yang <shunyong.yang@...-semitech.com>
Cc:     linux-efi@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Joey Zheng <yu.zheng@...-semitech.com>
Subject: Re: [PATCH] efi/capsule-loader: Don't output reset log when header
 flags is not set

On 25 April 2018 at 05:10, Shunyong Yang <shunyong.yang@...-semitech.com> wrote:
> It means firmware attempts to immediately process or launch the capsule
> when flags in capsule header is not set. Moreover, reset is not needed
> in this case. Current code will output log to indicate reset.
>
> This patch adds a branch to avoid reset log output when the flags is not
> set.
>
> Cc: Joey Zheng <yu.zheng@...-semitech.com>
> Signed-off-by: Shunyong Yang <shunyong.yang@...-semitech.com>
> ---
>  drivers/firmware/efi/capsule-loader.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c
> index e456f4602df1..a63b8e5bde23 100644
> --- a/drivers/firmware/efi/capsule-loader.c
> +++ b/drivers/firmware/efi/capsule-loader.c
> @@ -134,10 +134,15 @@ static ssize_t efi_capsule_submit_update(struct capsule_info *cap_info)
>
>         /* Indicate capsule binary uploading is done */
>         cap_info->index = NO_FURTHER_WRITE_ACTION;
> -       pr_info("Successfully upload capsule file with reboot type '%s'\n",
> -               !cap_info->reset_type ? "RESET_COLD" :
> -               cap_info->reset_type == 1 ? "RESET_WARM" :
> -               "RESET_SHUTDOWN");
> +
> +       if (cap_info->header.flags)

You should check for the relevant flag bits here, because the 16 lower
bits are platform dependent.

> +               pr_info("Successfully upload capsule file with reboot type '%s'\n",
> +                       !cap_info->reset_type ? "RESET_COLD" :
> +                       cap_info->reset_type == 1 ? "RESET_WARM" :
> +                       "RESET_SHUTDOWN");
> +       else
> +               pr_info("Successfully upload, process and launch capsule file\n");
> +
>         return 0;
>  }
>
> --
> 1.8.3.1
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ