| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 18 Jun 2018 21:16:45 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Vineet Gupta <vgupta@...opsys.com>,
Alexey Brodkin <abrodkin@...opsys.com>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
devicetree@...r.kernel.org, linux-snps-arc@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: Joe Perches <joe@...ches.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH] ARC: dts: Remove leading 0x from node unit addresses
Remove leading 0x from all node unit addresses with a sed command:
sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" arch/arc/boot/dts/*.dts*
This fixes DTC warnings like:
Warning (unit_address_format): /cpu_card/dw-apb-gpio@...000: unit name should not have leading "0x"
Reported-by: Joe Perches <joe@...ches.com>
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arc/boot/dts/abilis_tb10x.dtsi | 4 ++--
arch/arc/boot/dts/axc001.dtsi | 6 +++---
arch/arc/boot/dts/axc003.dtsi | 6 +++---
arch/arc/boot/dts/axc003_idu.dtsi | 6 +++---
arch/arc/boot/dts/axs10x_mb.dtsi | 22 +++++++++++-----------
arch/arc/boot/dts/vdk_axc003.dtsi | 4 ++--
arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 14 +++++++-------
8 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index 3121536b25a3..593cdd96535d 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -178,7 +178,7 @@
clocks = <&ahb_clk>;
};
- spi0: spi@...E010000 {
+ spi0: spi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
@@ -189,7 +189,7 @@
interrupts = <26 8>;
clocks = <&ahb_clk>;
};
- spi1: spi@...E011000 {
+ spi1: spi@...11000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index fdc266504ada..37be3bf03ad6 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -41,7 +41,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -60,7 +60,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -88,7 +88,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index dc91c663bcc0..817e2f5ee834 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -55,7 +55,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -74,7 +74,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -106,7 +106,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 69ff4895f2ba..5d912f9957fe 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -62,7 +62,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -81,7 +81,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -112,7 +112,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 47b74fbc403c..c550364e0550 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -68,7 +68,7 @@
};
};
- ethernet@...8000 {
+ ethernet@...00 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -83,13 +83,13 @@
reset-names = "stmmaceth";
};
- ehci@...0000 {
+ ehci@...00 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
- ohci@...0000 {
+ ohci@...00 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
@@ -113,7 +113,7 @@
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
- mmc@...5000 {
+ mmc@...00 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
fifo-depth = < 16 >;
@@ -124,7 +124,7 @@
bus-width = < 4 >;
};
- uart@...0000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
@@ -134,7 +134,7 @@
reg-io-width = <4>;
};
- uart@...1000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
@@ -145,7 +145,7 @@
};
/* UART muxed with USB data port (ttyS3) */
- uart@...2000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
@@ -155,7 +155,7 @@
reg-io-width = <4>;
};
- i2c@...d000 {
+ i2c@...00 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
@@ -172,7 +172,7 @@
#sound-dai-cells = <0>;
};
- i2c@...f000 {
+ i2c@...00 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -213,13 +213,13 @@
};
};
- eeprom@...4{
+ eeprom@54 {
compatible = "atmel,24c01";
reg = <0x54>;
pagesize = <0x8>;
};
- eeprom@...7{
+ eeprom@57 {
compatible = "atmel,24c04";
reg = <0x57>;
pagesize = <0x8>;
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index 0fd6ba985b16..84e8766c8ca2 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -36,7 +36,7 @@
#interrupt-cells = <1>;
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -49,7 +49,7 @@
};
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 28956f9a9f3d..eb7e705e8a27 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -44,7 +44,7 @@
#interrupt-cells = <1>;
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -57,7 +57,7 @@
};
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 48bb4b4cd234..f21ade2931eb 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -36,7 +36,7 @@
};
};
- ethernet@...8000 {
+ ethernet@...00 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@
clock-names = "stmmaceth";
};
- ehci@...0000 {
+ ehci@...00 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
- uart@...0000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <2403200>;
@@ -65,7 +65,7 @@
reg-io-width = <4>;
};
- uart@...1000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <2403200>;
@@ -75,7 +75,7 @@
reg-io-width = <4>;
};
- uart@...2000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <2403200>;
@@ -101,7 +101,7 @@
interrupt-names = "arc_ps2_irq";
};
- mmc@...5000 {
+ mmc@...00 {
compatible = "snps,dw-mshc";
reg = <0x15000 0x400>;
fifo-depth = <1024>;
@@ -119,7 +119,7 @@
* This node is intentionally put outside of MB above becase
* it maps areas outside of MB's 0xEz-0xFz.
*/
- uio_ev: uio@...0000000 {
+ uio_ev: uio@...00000 {
compatible = "generic-uio";
reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
--
2.14.1
Powered by blists - more mailing lists