linux-kernel - Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180722181748.24bc47d8@archlinux>
Date:   Sun, 22 Jul 2018 18:17:48 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Brian Masney <masneyb@...tation.org>
Cc:     Rob Herring <robh@...nel.org>, mark.rutland@....com,
        andy.gross@...aro.org, david.brown@...aro.org,
        linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-soc@...r.kernel.org, jonathan@...ek.ca,
        jmaneyrol@...ensense.com, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, mkelly@...o.com, fischerdouglasc@...il.com,
        bshah@....org, ctatlor97@...il.com, drew.paterson@....com
Subject: Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power
 settings from device tree

On Sun, 22 Jul 2018 12:37:20 +0000
Brian Masney <masneyb@...tation.org> wrote:

> On Sat, Jul 21, 2018 at 06:37:16PM +0100, Jonathan Cameron wrote:
> > On Fri, 20 Jul 2018 11:36:35 -0600
> > Rob Herring <robh@...nel.org> wrote:
> >   
> > > On Tue, Jul 17, 2018 at 04:41:54AM -0400, Brian Masney wrote:  
> > > > This patch adds support for optionally reading the prox_diode and
> > > > prox_power settings from device tree. This was tested using a LG
> > > > Nexus 5 (hammerhead) which requires a different diode than the driver
> > > > default for the IR LED.
> > > > 
> > > > Signed-off-by: Brian Masney <masneyb@...tation.org>
> > > > ---
> > > > The next patch in the series removes the tsl2772 driver from the
> > > > trivial-devices.txt file. I separated it out so that change can go
> > > > through device tree.
> > > > 
> > > >  .../devicetree/bindings/iio/light/tsl2772.txt | 39 +++++++++++++++++++    
> > > 
> > > Please split DT bindings to separate patch.
> > >   
> > > >  drivers/iio/light/tsl2772.c                   | 16 ++++++++
> > > >  include/dt-bindings/iio/amstaos,tsl2772.h     | 24 ++++++++++++
> > > >  3 files changed, 79 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > > >  create mode 100644 include/dt-bindings/iio/amstaos,tsl2772.h
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > > > new file mode 100644
> > > > index 000000000000..ab553d52b9fc
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > > > @@ -0,0 +1,39 @@
> > > > +* AMS/TAOS ALS and proximity sensor
> > > > +
> > > > +Required properties:
> > > > +
> > > > +  - compatible: Should be one of
> > > > +		"amstaos,tsl2571"
> > > > +		"amstaos,tsl2671"
> > > > +		"amstaos,tmd2671"
> > > > +		"amstaos,tsl2771"
> > > > +		"amstaos,tmd2771"
> > > > +		"amstaos,tsl2572"
> > > > +		"amstaos,tsl2672"
> > > > +		"amstaos,tmd2672"
> > > > +		"amstaos,tsl2772"
> > > > +		"amstaos,tmd2772"
> > > > +  - reg: the I2C address of the device
> > > > +
> > > > +Optional properties:
> > > > +
> > > > +  - amstaos,prox_diode - must be TSL2772_DIODE0, TSL2772_DIODE1, or
> > > > +                         TSL2772_DIODE_BOTH.    
> > > 
> > > s/_/-/
> > >   
> > > > +  - amstaos,prox_power - must be TSL2772_100_mA, TSL2772_50_mA, TSL2772_25_mA,
> > > > +                         or TSL2772_13_mA.    
> > > 
> > > I wonder if this should be common. Perhaps we should use the existing 
> > > 'led-max-microamp' as this is setting the current for an IR LED.  
> > 
> > Seems reasonable, then perhaps have two controls to turn on the diodes
> > above.
> >   
> > > 
> > > And while called 'power' this setting is current.  
> > 
> > Also can we have real values?  I really don't like defines if they
> > aren't absolutely necessary - particularly when there is a nice real
> > unit to be used.  
> 
> How about these options then?
> 
> amstaos,proximity-diode-0-enabled;
> amstaos,proximity-diode-1-enabled;
> led-max-microamp = <100000>;

Works for me.  Rob?

J
> 
> Brian