[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1927657.aQyVdf9HM0@phil>
Date: Sat, 22 Sep 2018 22:57:26 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: robh+dt@...nel.org, vicencb@...il.com, shawn.lin@...k-chips.com,
ezequiel@...labora.com, enric.balletbo@...labora.com,
pbrobinson@...il.com, tom@...rs.com, dev@...rs.com,
stephen@...rs.com, amit.kucheria@...aro.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 0/4] Add 96Boards Rock960 CE board support
Am Donnerstag, 13. September 2018, 20:05:41 CEST schrieb Manivannan Sadhasivam:
> This patchset adds 96Boards Rock960 CE board support. Rock960 CE
> (Consumer Edition) board is one of the member of 96Boards Consumer
> Edition and AI platform and is manufactured by Vamrs Limited. Most of
> the board configuration is shared with the Ficus board manufactured by
> vamrs, which is an Enterprise 96Board.
>
> For the sake of avoiding code duplication, a common rock960.dtsi file
> with common DT nodes for both boards and separate board specific DTS
> files has been added.
>
> To be specific, below are some of the key differences between both
> boards:
>
> 1. Different host enable GPIO for USB
> 2. Different power and reset GPIO for PCI-E
> 3. No Ethernet port on Rock960
>
> While adding the board support, SD card Chip detection support is also
> added to the common dtsi file, shared by both boards.
>
> This series has been tested on Rock960 CE v1.2 board.
>
> Thanks,
> Mani
>
> Changes in v3:
>
> * Moved usb and pcie nodes to common dtsi and kept only the properties
> which differ in board specific dts.
> * Updated the common dtsi commit description.
>
> Changes in v2:
>
> * Changed the board compatible to "vamrs,rock960"
>
> Manivannan Sadhasivam (4):
> arm64: dts: rockchip: Split out common nodes for Rock960 based boards
> dt-bindings: arm: rockchip: Add binding for Rock960 board
> arm64: boot: dts: rockchip: Add support for Rock960 board
> arm64: dts: rockchip: Enable SD card detection for Rock960 boards
applied all 4 for 4.20, after fixing the subject of patch3 (-boot:)
and adapting to recent Makefile changes as pointed out by
Ezequiel.
Heiko
Powered by blists - more mailing lists