lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAO-hwJLBd-VGAoMBpwEZhWY2khsDEz2qKh05tNjbNVhAzQCRJA@mail.gmail.com>
Date:   Thu, 17 Jan 2019 09:13:36 +0100
From:   Benjamin Tissoires <benjamin.tissoires@...hat.com>
To:     Kim Phillips <kim@...phillips.com>
Cc:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        lkml <linux-kernel@...r.kernel.org>,
        Paul Menzel <pmenzel@...gen.mpg.de>,
        "open list:HID CORE LAYER" <linux-input@...r.kernel.org>
Subject: Re: [PATCH] Input: synaptics - add PNP IDs for Dell XPS models to forcepad

On Wed, Jan 16, 2019 at 5:59 AM Kim Phillips <kim@...phillips.com> wrote:
>
> On 1/15/19 2:57 AM, Benjamin Tissoires wrote:
> > On Mon, Jan 14, 2019 at 7:40 PM Dmitry Torokhov
> > <dmitry.torokhov@...il.com> wrote:
> >>
> >> On Sat, Jan 12, 2019 at 04:04:36PM -0600, Kim Phillips wrote:
> >>> On 1/11/19 7:40 PM, Dmitry Torokhov wrote:
> >>>> Hi Kim,
> >>>
> >>> Hi Dmitry,
> >>>
> >>>> On Fri, Jan 11, 2019 at 02:54:30PM -0600, Kim Phillips wrote:
> >>>>> This patch is the result of seeing this message:
> >>>>>
> >>>>> psmouse serio1: synaptics: Your touchpad (PNP: DLL087c PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@...r.kernel.org.
> >>>>>
> >>>>> If I set psmouse.synaptics_intertouch=1, or add the PNP ID to
> >>>>> smbus_pnp_ids, the touchpad continues to work, and the above message
> >>>>> goes away, but we now get:
> >>>>>
> >>>>> psmouse serio1: synaptics: Trying to set up SMBus access
> >>>>> psmouse serio1: synaptics: SMbus companion is not ready yet
> >>>>>
> >>>>> With this patch applied, i.e., the PNP IDs are added to the forcepad
> >>>>> array, the touchpad continues to work and all of the above messages
> >>>>> disappear.
> >>>>
> >>>> Are you sure the touchpad in XPSes is a forcepad (i.e. it does not have
> >>>> physical button underneath it)? As far as I know there were only couple
> >>>> of HP laptops with forcepads and when switching to RMI mode forcepads
> >>>> need F21 handler that we do not currently have in the kernel.
> >>>
> >>> I see, no, I'm not sure, but assuming you're right, the IDs
> >>> should be added to the smbus array instead, after fixing
> >>> the SMbus "companion not ready" problem?  Pointers for that and
> >>> the below interrupts when touchpad idle after resume, welcome.
> >>>
> >>> Also, the link to get the RMI4 spec in
> >>> Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
> >>> is broken.  Any pointers for that also appreciated.
> >>
> >> OK, sorting it all out some more:
> >>
> >> - because we do not have support for F21 necessary for forcepads adding
> >>    APIC ID to forcepad list actuallty disables SMbus companion mode, that
> >>    is why you no longer see "companion not ready" messages vs. setting
> >>    psmouse.synaptics_intertouch=1 module parameter.
> >
> > Yep
> >
> >>
> >> - this does not really matter as your touchpad ends up being driven by
> >>    i2c-hid and hid-multitouch drivers, and that is how we wait it to
> >>    work, as we do not want to deviate from behavior on Windows since OEM
> >>    tested it (the device and firmware) in tha configuration.
> >
> > Yep too. The I2C-hid touchpads from Synaptics do not have the SMBus
> > wired at all, so we can't enable SMBus for them. Also, the fact that
> > the device gets loaded over i2c-hid means that we can't know that it
> > is the case from the psmouse/synaptics point of view.
>
> Sigh, OK, I wasn't registering the word "not" when reading
> "If i2c-hid and hid-rmi are not used" too quickly.
>
> >> - we need to figure out issue with interrupts on resume, maybe Benjamin
> >>    have seen it?
> >
> > First time I see it.
> >
> > I just tried on a XPS 9360 and kernel v4.18 (fedora) and nothing was a problem.
> > I then tried on a XPS 9575 with v4.19, and here, the wacom I2C node is
> > also keeping firing the interrupts, but not the touchpad. However,
> > here, the interrupts are not stopping when I touch the touchscreen or
> > if I approach a pen.
> >
> > Kim, rmmod-ing i2c-hid and modprobing back it with the parameter
> > debug=1 doesn't show any events processed when the interrupts are
> > firing. Do you see the same?
>
> After rmmodding i2c_hid, the WCOM488F and SYNA2393 entries in /proc/interrupts
> somewhat expectedly disappear, however, the modprobe (with or without debug=1)
> fails to bring them back, with these messages left in dmesg:
>
> [ 3882.073222] calling  i2c_hid_driver_init+0x0/0x1000 [i2c_hid] @ 3082
> [ 3882.180938] i2c_hid i2c-WCOM488F:00: HID over i2c has not been provided an Int IRQ
> [ 3882.181060] i2c_hid: probe of i2c-WCOM488F:00 failed with error -22
> [ 3882.181065] probe of i2c-WCOM488F:00 returned 0 after 496 usecs
> [ 3882.289196] i2c_hid i2c-SYNA2393:00: HID over i2c has not been provided an Int IRQ
> [ 3882.289318] i2c_hid: probe of i2c-SYNA2393:00 failed with error -22
> [ 3882.289321] probe of i2c-SYNA2393:00 returned 0 after 508 usecs
> [ 3882.289418] initcall i2c_hid_driver_init+0x0/0x1000 [i2c_hid] returned 0 after 211119 usecs

Yes, that is a weird behavior I experience the other day also. It
looks like rmmod-ing the driver simply kills the irq description
attached to the i2c node. This waasn't the case previously, and I
wonder if the issue is in i2c-hid (unlikely) or in i2c-core.

>
> In order to work around that problem, I set h2c_hid.debug=1 in the
> boot command line, and after a resume, dmesg contains these messages,
> relevant to i2c_hid:
>
> [  267.235673] i2c_hid i2c-WCOM488F:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 3078, parent: i2c-9
> [  267.235676] input input16: calling input_dev_resume+0x0/0x50 @ 3060, parent: card0
> [  267.235681] input input16: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
> [  267.235682] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power
> [  267.235687] input input17: calling input_dev_resume+0x0/0x50 @ 3060, parent: card0
> [  267.235689] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 00 08
> [  267.235693] input input17: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
> [  267.235698] idma64 idma64.1: calling platform_pm_resume+0x0/0x50 @ 3060, parent: 0000:00:15.1
> [  267.235701] idma64 idma64.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
> [  267.235706] i2c_designware i2c_designware.1: calling platform_pm_resume+0x0/0x50 @ 3060, parent: 0000:00:15.1
> [  267.235709] i2c_designware i2c_designware.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
> [  267.235718] rfkill rfkill0: calling rfkill_resume+0x0/0x60 @ 3060, parent: phy0
> [  267.235724] rfkill rfkill0: rfkill_resume+0x0/0x60 returned 0 after 3 usecs
> [  267.235768] i2c_hid i2c-SYNA2393:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 3108, parent: i2c-10
> [  267.235774] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power
> [  267.235776] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 00 08
> [  267.236051] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
> [  267.236053] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 3d 03 23 00 04 00 0d 00
> [  267.236076] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.236080] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 fd 89 a3 07 f3 02 20 8d 49 06 d7 9c ff ff 80 59 5c 13 d7 9c ff ff 08 00 00 08 d7 9c ff ff 01 00 00 00 00 00 00 00 16 00 00 00 66 69 6c 65 75 74 6c 2e 6d 65 73 73
> [  267.237691] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.238137] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
> [  267.238140] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 34 03 23 00 04 00 04 03
> [  267.238670] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.238673] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.239708] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.240084] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
> [  267.240087] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 36 03 23 00 04 00 06 03
> [  267.241377] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.241380] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [  267.241711] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.243279] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.243981] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.243984] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.244847] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.245360] i2c_hid i2c-SYNA2393:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 9360 usecs
> [  267.245455] input input27: calling input_dev_resume+0x0/0x50 @ 3060, parent: 0018:06CB:7A13.0002
> [  267.245460] input input27: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
> [  267.246773] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.246777] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [  267.246919] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.248517] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.249383] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.249386] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.250116] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.251767] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.252137] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.252140] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [  267.253440] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.254734] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.254737] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.255015] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.256612] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.257475] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.257478] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [  267.258275] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.259852] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.260046] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.260049] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.261441] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.262789] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.262792] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [  267.263129] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.264718] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.265410] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
> [  267.265413] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
> [  267.266318] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.267971] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.268169] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
> [  267.268172] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3e 03 05 00 05 00 0e 02 00
> [  267.268728] i2c_hid i2c-WCOM488F:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 32273 usecs
> [  267.269575] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.271144] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.272719] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
> [  267.274298] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
>
> ...and it goes on and on, where that same last line gets
> repeated as the interrupts fire, until I start using the touchpad,
> thereby stopping the interrupts.

It looks like valid inputs. So I would expect the firmware to unset
the IRQ line, but it doesn't do it.

On an other thread, it has been brought to my attention that maybe we
are not 100% compatible with the Windows driver regarding
sleep/power_on commands. We expect the device to be ready while the
Windows driver waits a little before sending a command. Maybe we can
try to see if adding I2C_HID_QUIRK_DELAY_AFTER_SLEEP to this device
changes something.

>
> I'm not seeing any such bad behaviour from the WCOM device.

In my case, the reports have a size of 0, so they are firing but
nothing is processed (though i2c fetches the reports).
I'll need to investigate all of these.

Cheers,
Benjamin

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ