| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Jan 2019 11:03:19 +0100
From: Ard Biesheuvel <ard.biesheuvel@...aro.org>
To: Sumit Garg <sumit.garg@...aro.org>
Cc: Jens Wiklander <jens.wiklander@...aro.org>,
Herbert Xu <herbert@...dor.apana.org.au>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
"open list:HARDWARE RANDOM NUMBER GENERATOR CORE"
<linux-crypto@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
mpm@...enic.com, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Bhupesh Sharma <bhsharma@...hat.com>, tee-dev@...ts.linaro.org
Subject: Re: [PATCH v4 4/4] hwrng: add OP-TEE based rng driver
On Mon, 21 Jan 2019 at 10:30, Sumit Garg <sumit.garg@...aro.org> wrote:
>
> On ARM SoC's with TrustZone enabled, peripherals like entropy sources
> might not be accessible to normal world (linux in this case) and rather
> accessible to secure world (OP-TEE in this case) only. So this driver
> aims to provides a generic interface to OP-TEE based random number
> generator service.
>
> This driver registers on TEE bus to interact with OP-TEE based rng
> device/service.
>
> Signed-off-by: Sumit Garg <sumit.garg@...aro.org>
> ---
> MAINTAINERS | 5 +
> drivers/char/hw_random/Kconfig | 15 ++
> drivers/char/hw_random/Makefile | 1 +
> drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 293 insertions(+)
> create mode 100644 drivers/char/hw_random/optee-rng.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 32d44447..502733c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11260,6 +11260,11 @@ M: Jens Wiklander <jens.wiklander@...aro.org>
> S: Maintained
> F: drivers/tee/optee/
>
> +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
> +M: Sumit Garg <sumit.garg@...aro.org>
> +S: Maintained
> +F: drivers/char/hw_random/optee-rng.c
> +
> OPA-VNIC DRIVER
> M: Dennis Dalessandro <dennis.dalessandro@...el.com>
> M: Niranjana Vishwanathapura <niranjana.vishwanathapura@...el.com>
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index dac895d..25a7d8f 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
> will be called exynos-trng.
>
> If unsure, say Y.
> +
> +config HW_RANDOM_OPTEE
> + tristate "OP-TEE based Random Number Generator support"
> + depends on OPTEE
> + default HW_RANDOM
> + help
> + This driver provides support for OP-TEE based Random Number
> + Generator on ARM SoCs where hardware entropy sources are not
> + accessible to normal world (Linux).
> +
> + To compile this driver as a module, choose M here: the module
> + will be called optee-rng.
> +
> + If unsure, say Y.
> +
> endif # HW_RANDOM
>
> config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index e35ec3c..7c9ef4a 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o
> obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
> obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
> diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
> new file mode 100644
> index 0000000..6ac862a
> --- /dev/null
> +++ b/drivers/char/hw_random/optee-rng.c
> @@ -0,0 +1,272 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018-2019 Linaro Ltd.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/hw_random.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +
> +#define DRIVER_NAME "optee-rng"
> +
> +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001
> +
> +/*
> + * TA_CMD_GET_ENTROPY - Get Entropy from RNG
> + *
> + * param[0] (inout memref) - Entropy buffer memory reference
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
> + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
> + */
> +#define TA_CMD_GET_ENTROPY 0x0
> +
> +/*
> + * TA_CMD_GET_RNG_INFO - Get RNG information
> + *
> + * param[0] (out value) - value.a: RNG data-rate in bytes per second
> + * value.b: Quality/Entropy per 1024 bit of data
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + */
> +#define TA_CMD_GET_RNG_INFO 0x1
> +
> +#define MAX_ENTROPY_REQ_SZ (4 * 1024)
> +
> +static struct tee_context *ctx;
> +static struct tee_shm *entropy_shm_pool;
> +static u32 ta_rng_data_rate;
> +static u32 ta_rng_session_id;
> +
> +static size_t get_optee_rng_data(void *buf, size_t req_size)
> +{
> + u32 ret = 0;
> + u8 *rng_data = NULL;
> + size_t rng_size = 0;
> + struct tee_ioctl_invoke_arg inv_arg = {0};
> + struct tee_param param[4] = {0};
> +
> + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */
> + inv_arg.func = TA_CMD_GET_ENTROPY;
> + inv_arg.session = ta_rng_session_id;
> + inv_arg.num_params = 4;
> +
> + /* Fill invoke cmd params */
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> + param[0].u.memref.shm = entropy_shm_pool;
> + param[0].u.memref.size = req_size;
> + param[0].u.memref.shm_offs = 0;
> +
> + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> + if ((ret < 0) || (inv_arg.ret != 0)) {
> + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
> + inv_arg.ret);
> + return 0;
> + }
> +
> + rng_data = tee_shm_get_va(entropy_shm_pool, 0);
> + if (IS_ERR(rng_data)) {
> + pr_err("tee_shm_get_va failed\n");
> + return 0;
> + }
> +
> + rng_size = param[0].u.memref.size;
> + memcpy(buf, rng_data, rng_size);
> +
> + return rng_size;
> +}
> +
> +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> + u8 *data = buf;
> + size_t read = 0, rng_size = 0;
> + int timeout = 1;
> +
> + if (max > MAX_ENTROPY_REQ_SZ)
> + max = MAX_ENTROPY_REQ_SZ;
> +
> + while (read == 0) {
> + rng_size = get_optee_rng_data(data, (max - read));
> +
> + data += rng_size;
> + read += rng_size;
> +
> + if (wait) {
> + if (timeout-- == 0)
> + return read;
> + msleep((1000 * (max - read)) / ta_rng_data_rate);
> + } else {
> + return read;
> + }
> + }
> +
> + return read;
> +}
> +
> +static int optee_rng_init(struct hwrng *rng)
> +{
> + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
> + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> + if (IS_ERR(entropy_shm_pool)) {
> + pr_err("tee_shm_alloc failed\n");
> + return PTR_ERR(entropy_shm_pool);
> + }
> +
> + return 0;
> +}
> +
> +static void optee_rng_cleanup(struct hwrng *rng)
> +{
> + tee_shm_free(entropy_shm_pool);
> +}
> +
> +static struct hwrng optee_rng = {
> + .name = DRIVER_NAME,
> + .init = optee_rng_init,
> + .cleanup = optee_rng_cleanup,
> + .read = optee_rng_read,
> +};
> +
> +static int get_optee_rng_info(struct device *dev)
> +{
> + u32 ret = 0;
> + struct tee_ioctl_invoke_arg inv_arg = {0};
> + struct tee_param param[4] = {0};
> +
> + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */
> + inv_arg.func = TA_CMD_GET_RNG_INFO;
> + inv_arg.session = ta_rng_session_id;
> + inv_arg.num_params = 4;
> +
> + /* Fill invoke cmd params */
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> +
> + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> + if ((ret < 0) || (inv_arg.ret != 0)) {
> + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n",
> + inv_arg.ret);
> + return -EINVAL;
> + }
> +
> + ta_rng_data_rate = param[0].u.value.a;
> + optee_rng.quality = param[0].u.value.b;
> +
> + return 0;
> +}
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> + return 1;
> + else
> + return 0;
> +}
> +
> +static int optee_rng_probe(struct device *dev)
> +{
> + struct tee_client_device *rng_device = to_tee_client_device(dev);
> + int ret = 0, err = -ENODEV;
> + struct tee_ioctl_open_session_arg sess_arg = {0};
> +
> + /* Open context with TEE driver */
> + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> + if (IS_ERR(ctx))
> + return -ENODEV;
> +
> + /* Open session with hwrng Trusted App */
> + memcpy(sess_arg.uuid, rng_device->id.b, TEE_IOCTL_UUID_LEN);
> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> + sess_arg.num_params = 0;
> +
> + ret = tee_client_open_session(ctx, &sess_arg, NULL);
> + if ((ret < 0) || (sess_arg.ret != 0)) {
> + dev_err(dev, "tee_client_open_session failed, error: %x\n",
> + sess_arg.ret);
> + err = -EINVAL;
> + goto out_ctx;
> + }
> + ta_rng_session_id = sess_arg.session;
> +
> + err = get_optee_rng_info(dev);
> + if (err)
> + goto out_sess;
> +
> + err = hwrng_register(&optee_rng);
> + if (err) {
> + dev_err(dev, "hwrng registration failed (%d)\n", err);
> + goto out_sess;
> + }
> +
> + return 0;
> +
> +out_sess:
> + tee_client_close_session(ctx, ta_rng_session_id);
> +out_ctx:
> + tee_client_close_context(ctx);
> +
> + return err;
> +}
> +
> +static int optee_rng_remove(struct device *dev)
> +{
> + hwrng_unregister(&optee_rng);
> + tee_client_close_session(ctx, ta_rng_session_id);
> + tee_client_close_context(ctx);
> +
> + return 0;
> +}
> +
> +const tee_client_device_id optee_rng_id_table[] = {
> + UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
> + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64),
> + {}
> +};
> +
Could we expose this via MODULE_DEVICE_TABLE() as well? That should
allow udev to load the module on demand.
> +static struct tee_client_driver optee_rng_driver = {
> + .id_table = optee_rng_id_table,
> + .driver = {
> + .name = DRIVER_NAME,
> + .bus = &tee_bus_type,
> + .probe = optee_rng_probe,
> + .remove = optee_rng_remove,
> + },
> +};
> +
> +static int __init optee_rng_mod_init(void)
> +{
> + int rc;
> +
> + rc = driver_register(&optee_rng_driver.driver);
> + if (rc)
> + pr_warn("driver registration failed, err: %d", rc);
> +
> + return rc;
> +}
> +
> +static void __exit optee_rng_mod_exit(void)
> +{
> + driver_unregister(&optee_rng_driver.driver);
> +}
> +
> +module_init(optee_rng_mod_init);
> +module_exit(optee_rng_mod_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Sumit Garg <sumit.garg@...aro.org>");
> +MODULE_DESCRIPTION("OP-TEE based random number generator driver");
> --
> 2.7.4
>
Powered by blists - more mailing lists