[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4e031eeb-2819-a97f-73bf-af84b04aa7b2@cogentembedded.com>
Date: Tue, 21 May 2019 12:27:24 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: megous@...ous.com, linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>
Cc: Icenowy Zheng <icenowy@...c.io>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH v5 2/6] net: stmmac: sun8i: force select external PHY when
no internal one
Hello!
On 21.05.2019 2:50, megous@...ous.com wrote:
> From: Icenowy Zheng <icenowy@...c.io>
>
> The PHY selection bit also exists on SoCs without an internal PHY; if it's
> set to 1 (internal PHY, default value) then the MAC will not make use of
> any PHY such SoCs.
^ "on" or "with" missing?
> This problem appears when adapting for H6, which has no real internal PHY
> (the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
> connected via RMII interface at GPIO bank A).
>
> Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
> to address the problem of a wrong default value.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> Signed-off-by: Ondrej Jirman <megous@...ous.com>
[...]
MBR, Sergei
Powered by blists - more mailing lists