[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5d164528-c797-5f94-f905-719d4f69542c@suse.de>
Date: Mon, 10 Jun 2019 15:45:37 +0200
From: Andreas Färber <afaerber@...e.de>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
ulf.hansson@...aro.org, robh+dt@...nel.org
Cc: sboyd@...nel.org, linux-arm-kernel@...ts.infradead.org,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, thomas.liau@...ions-semi.com,
linux-actions@...ts.infradead.org, linus.walleij@...aro.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH 2/7] dt-bindings: mmc: Add Actions Semi SD/MMC/SDIO
controller binding
Am 08.06.19 um 21:53 schrieb Manivannan Sadhasivam:
> Add devicetree binding for Actions Semi Owl SoC's SD/MMC/SDIO controller.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> .../devicetree/bindings/mmc/owl-mmc.txt | 37 +++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/owl-mmc.txt
Rob, should this be YAML now?
>
> diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.txt b/Documentation/devicetree/bindings/mmc/owl-mmc.txt
> new file mode 100644
> index 000000000000..a702f8d66cec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.txt
> @@ -0,0 +1,37 @@
> +Actions Semi Owl SoCs SD/MMC/SDIO controller
> +
> +Required properties:
> +- compatible: should be "actions,owl-mmc"
> +- reg: offset and length of the register set for the device.
> +- interrupts: single interrupt specifier.
> +- clocks: single clock specifier of the controller clock.
> +- resets: phandle to the reset line.
> +- dma-names: should be "mmc".
> +- dmas: single DMA channel specifier
I recall the main blocker for MMC being regulators, i.e. the I²C
attached multi-function PMIC. Yet I don't see any such required property
here, nor any patch series implementing it. Seems like this relies on
U-Boot having initialized SD/eMMC? Do you intend to make them optional
or did you want to hold off merging this one until the rest is done?
> +
> +Optional properties:
> +- pinctrl-names: pinctrl state names "default" must be defined.
> +- pinctrl-0: phandle referencing pin configuration of the controller.
> +- bus-width: see mmc.txt
> +- cap-sd-highspeed: see mmc.txt
> +- cap-mmc-highspeed: see mmc.txt
> +- sd-uhs-sdr12: see mmc.txt
> +- sd-uhs-sdr25: see mmc.txt
> +- sd-uhs-sdr50: see mmc.txt
> +- non-removable: see mmc.txt
I'm not convinced duplicating common properties is a good idea here, in
particular pinctrl.
Regards,
Andreas
> +
> +Example:
> +
> + mmc0: mmc@...30000 {
> + compatible = "actions,owl-mmc";
> + reg = <0x0 0xe0330000 0x0 0x4000>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cmu CLK_SD0>;
> + resets = <&cmu RESET_SD0>;
> + dmas = <&dma 2>;
> + dma-names = "mmc";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_default>;
> + bus-width = <4>;
> + cap-sd-highspeed;
> + };
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
Powered by blists - more mailing lists