lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4ffebfad-87d2-0e19-5b54-7e550c540d03@ti.com>
Date:   Tue, 5 Nov 2019 14:02:37 -0600
From:   Dan Murphy <dmurphy@...com>
To:     Heiner Kallweit <hkallweit1@...il.com>, <andrew@...n.ch>,
        <f.fainelli@...il.com>, <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] net: phy: dp83869: Add TI dp83869 phy

Heiner

On 11/5/19 1:55 PM, Heiner Kallweit wrote:
> On 05.11.2019 19:18, Dan Murphy wrote:
>> Add support for the TI DP83869 Gigabit ethernet phy
>> device.
>>
>> The DP83869 is a robust, low power, fully featured
>> Physical Layer transceiver with integrated PMD
>> sublayers to support 10BASE-T, 100BASE-TX and
>> 1000BASE-T Ethernet protocols.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>   drivers/net/phy/Kconfig              |   6 +
>>   drivers/net/phy/Makefile             |   1 +
>>   drivers/net/phy/dp83869.c            | 439 +++++++++++++++++++++++++++
>>   include/dt-bindings/net/ti-dp83869.h |  43 +++
>>   4 files changed, 489 insertions(+)
>>   create mode 100644 drivers/net/phy/dp83869.c
>>   create mode 100644 include/dt-bindings/net/ti-dp83869.h
>>
>> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
>> index fe602648b99f..4f8db1bb72a8 100644
>> --- a/drivers/net/phy/Kconfig
>> +++ b/drivers/net/phy/Kconfig
>> @@ -364,6 +364,12 @@ config DP83867_PHY
>>   	---help---
>>   	  Currently supports the DP83867 PHY.
>>   
>> +config DP83869_PHY
>> +	tristate "Texas Instruments DP83869 Gigabit PHY"
>> +	---help---
>> +	  Currently supports the DP83869 PHY.  This PHY supports copper and
>> +	  fiber connections.
>> +
>>   config FIXED_PHY
>>   	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
>>   	depends on PHYLIB
>> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
>> index a03437e091f3..b433ec3bf9a6 100644
>> --- a/drivers/net/phy/Makefile
>> +++ b/drivers/net/phy/Makefile
>> @@ -70,6 +70,7 @@ obj-$(CONFIG_DP83822_PHY)	+= dp83822.o
>>   obj-$(CONFIG_DP83TC811_PHY)	+= dp83tc811.o
>>   obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
>>   obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
>> +obj-$(CONFIG_DP83869_PHY)	+= dp83869.o
>>   obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
>>   obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
>>   obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
>> diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
>> new file mode 100644
>> index 000000000000..eecc9b3129ca
>> --- /dev/null
>> +++ b/drivers/net/phy/dp83869.c
>> @@ -0,0 +1,439 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Driver for the Texas Instruments DP83869 PHY
>> + * Copyright (C) 2019 Texas Instruments Inc.
>> + */
>> +
>> +#include <linux/ethtool.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mii.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/phy.h>
>> +#include <linux/delay.h>
>> +
>> +#include <dt-bindings/net/ti-dp83869.h>
>> +
>> +#define DP83869_PHY_ID		0x2000a0f1
>> +#define DP83869_DEVADDR		0x1f
>> +
>> +#define MII_DP83869_CFG1	0x09
> Is this different from standard register MII_CTRL1000 ?

No it is the same I will change


>> +#define MII_DP83869_PHYCTRL	0x10
>> +#define MII_DP83869_MICR	0x12
>> +#define MII_DP83869_ISR		0x13
>> +#define DP83869_CTRL		0x1f
>> +#define DP83869_CFG4		0x1e
>> +
>> +/* Extended Registers */
>> +#define DP83869_GEN_CFG3        0x0031
>> +#define DP83869_RGMIICTL	0x0032
>> +#define DP83869_STRAP_STS1	0x006e
>> +#define DP83869_RGMIIDCTL	0x0086
>> +#define DP83869_IO_MUX_CFG	0x0170
>> +#define DP83869_OP_MODE		0x01df
>> +#define DP83869_FX_CTRL		0x0c00
>> +
>> +#define DP83869_SW_RESET	BIT(15)
>> +#define DP83869_SW_RESTART	BIT(14)
>> +
>> +/* MICR Interrupt bits */
>> +#define MII_DP83869_MICR_AN_ERR_INT_EN		BIT(15)
>> +#define MII_DP83869_MICR_SPEED_CHNG_INT_EN	BIT(14)
>> +#define MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN	BIT(13)
>> +#define MII_DP83869_MICR_PAGE_RXD_INT_EN	BIT(12)
>> +#define MII_DP83869_MICR_AUTONEG_COMP_INT_EN	BIT(11)
>> +#define MII_DP83869_MICR_LINK_STS_CHNG_INT_EN	BIT(10)
>> +#define MII_DP83869_MICR_FALSE_CARRIER_INT_EN	BIT(8)
>> +#define MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN	BIT(4)
>> +#define MII_DP83869_MICR_WOL_INT_EN		BIT(3)
>> +#define MII_DP83869_MICR_XGMII_ERR_INT_EN	BIT(2)
>> +#define MII_DP83869_MICR_POL_CHNG_INT_EN	BIT(1)
>> +#define MII_DP83869_MICR_JABBER_INT_EN		BIT(0)
>> +
>> +#define MII_DP83869_BMCR_DEFAULT	(BMCR_ANENABLE | \
>> +					 BMCR_FULLDPLX | \
>> +					 BMCR_SPEED1000)
>> +
>> +/* This is the same bit mask as the BMCR so re-use the BMCR default */
>> +#define DP83869_FX_CTRL_DEFAULT	MII_DP83869_BMCR_DEFAULT
>> +
>> +/* CFG1 bits */
>> +#define DP83869_1000BT_HALF_DUP		BIT(8)
>> +#define DP83869_1000BT_FULL_DUP		BIT(9)
> This seems to duplicate ADVERTISE_1000FULL et al
No it is the same I will change
>> +#define DP83869_MAN_CFG_MASTER_SLAVE	BIT(10)
>> +
> Is this really different from standard bits CTL1000_AS_MASTER
> and CTL1000_ENABLE_MASTER ?

No it is the same I will change


>> +#define DP83869_CFG1_DEFAULT	(DP83869_1000BT_HALF_DUP | \
>> +				 DP83869_1000BT_HALF_DUP | \
>> +				 DP83869_MAN_CFG_MASTER_SLAVE)
>> +
>> +/* RGMIICTL bits */
>> +#define DP83869_RGMII_TX_CLK_DELAY_EN		BIT(1)
>> +#define DP83869_RGMII_RX_CLK_DELAY_EN		BIT(0)
>> +
>> +/* STRAP_STS1 bits */
>> +#define DP83869_STRAP_STS1_RESERVED		BIT(11)
>> +
>> +/* PHY CTRL bits */
>> +/* PHYCTRL bits */
>> +#define DP83869_RX_FIFO_SHIFT	12
>> +#define DP83869_TX_FIFO_SHIFT	14
>> +
>> +/* PHY_CTRL lower bytes 0x48 are declared as reserved */
>> +#define DP83869_PHY_CTRL_DEFAULT	0x48
>> +#define DP83869_PHYCR_FIFO_DEPTH_MASK	GENMASK(15, 12)
>> +#define DP83869_PHYCR_RESERVED_MASK	BIT(11)
>> +
>> +/* RGMIIDCTL bits */
>> +#define DP83869_RGMII_TX_CLK_DELAY_SHIFT	4
>> +
>> +/* IO_MUX_CFG bits */
>> +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL	0x1f
>> +
>> +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX	0x0
>> +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN	0x1f
>> +#define DP83869_IO_MUX_CFG_CLK_O_SEL_MASK	(0x1f << 8)
>> +#define DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT	8
>> +
>> +/* CFG3 bits */
>> +#define DP83869_CFG3_PORT_MIRROR_EN              BIT(0)
>> +
>> +/* OP MODE */
>> +#define DP83869_OP_MODE_MII			BIT(5)
>> +#define DP83869_SGMII_RGMII_BRIDGE		BIT(6)
>> +
>> +enum {
>> +	DP83869_PORT_MIRROING_KEEP,
>> +	DP83869_PORT_MIRROING_EN,
>> +	DP83869_PORT_MIRROING_DIS,
> MIRRORING misses an R
ack
>
>> +};
>> +
>> +struct dp83869_private {
>> +	int tx_fifo_depth;
>> +	int rx_fifo_depth;
>> +	int io_impedance;
>> +	int port_mirroring;
>> +	bool rxctrl_strap_quirk;
>> +	int clk_output_sel;
>> +	int mode;
>> +};
>> +
>> +static int op_mode;
>> +
>> +module_param(op_mode, int, 0644);
>> +MODULE_PARM_DESC(op_mode, "The operational mode of the PHY");
>> +
> A module parameter isn't the preferred option here.
> You could have more than one such PHY in different configurations.
> Other drivers like the Marvell one use the interface mode to
> check for the desired mode. Or you could read it from DT.
>
We do read the initial mode from the DT but there was a request to be 
able to change the mode during runtime.
>> +static int dp83869_ack_interrupt(struct phy_device *phydev)
>> +{
>> +	int err = phy_read(phydev, MII_DP83869_ISR);
>> +
>> +	if (err < 0)
>> +		return err;
>> +
>> +	return 0;
>> +}
>> +
>> +static int dp83869_config_intr(struct phy_device *phydev)
>> +{
>> +	int micr_status;
>> +
>> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
>> +		micr_status = phy_read(phydev, MII_DP83869_MICR);
>> +		if (micr_status < 0)
>> +			return micr_status;
>> +
>> +		micr_status |=
>> +			(MII_DP83869_MICR_AN_ERR_INT_EN |
>> +			MII_DP83869_MICR_SPEED_CHNG_INT_EN |
>> +			MII_DP83869_MICR_AUTONEG_COMP_INT_EN |
>> +			MII_DP83869_MICR_LINK_STS_CHNG_INT_EN |
>> +			MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN |
>> +			MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN);
>> +
>> +		return phy_write(phydev, MII_DP83869_MICR, micr_status);
>> +	}
>> +
>> +	micr_status = 0x0;
> This isn't really needed here, you can use 0 directly.
ack
>
>> +	return phy_write(phydev, MII_DP83869_MICR, micr_status);
>> +}
>> +
>> +static int dp83869_config_port_mirroring(struct phy_device *phydev)
>> +{
>> +	struct dp83869_private *dp83869 =
>> +		(struct dp83869_private *)phydev->priv;
>> +
> The cast isn't needed.
ack
>
>> +	if (dp83869->port_mirroring == DP83869_PORT_MIRROING_EN)
>> +		phy_set_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
>> +				 DP83869_CFG3_PORT_MIRROR_EN);
>> +	else
>> +		phy_clear_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
>> +				   DP83869_CFG3_PORT_MIRROR_EN);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF_MDIO
>> +static int dp83869_of_init(struct phy_device *phydev)
>> +{
>> +	struct dp83869_private *dp83869 = phydev->priv;
>> +	struct device *dev = &phydev->mdio.dev;
>> +	struct device_node *of_node = dev->of_node;
>> +	int ret;
>> +
>> +	if (!of_node)
>> +		return -ENODEV;
>> +
>> +	dp83869->io_impedance = -EINVAL;
>> +
>> +	/* Optional configuration */
>> +	ret = of_property_read_u32(of_node, "ti,clk-output-sel",
>> +				   &dp83869->clk_output_sel);
>> +	if (ret || dp83869->clk_output_sel > DP83869_CLK_O_SEL_REF_CLK)
>> +		dp83869->clk_output_sel = DP83869_CLK_O_SEL_REF_CLK;
>> +
>> +	ret = of_property_read_u32(of_node, "ti,op-mode", &dp83869->mode);
>> +	if (ret == 0) {
>> +		if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
>> +		    dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
>> +			return -EINVAL;
>> +	}
>> +
>> +	op_mode = dp83869->mode;
>> +
>> +	if (of_property_read_bool(of_node, "ti,max-output-impedance"))
>> +		dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX;
>> +	else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
>> +		dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN;
>> +
>> +	if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
>> +		dp83869->port_mirroring = DP83869_PORT_MIRROING_EN;
>> +	else
>> +		dp83869->port_mirroring = DP83869_PORT_MIRROING_DIS;
>> +
>> +	if (of_property_read_u32(of_node, "rx-fifo-depth",
>> +				 &dp83869->rx_fifo_depth))
>> +		dp83869->rx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
>> +
>> +	if (of_property_read_u32(of_node, "tx-fifo-depth",
>> +				 &dp83869->tx_fifo_depth))
>> +		dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
>> +
>> +	return 0;
>> +}
>> +#else
>> +static int dp83869_of_init(struct phy_device *phydev)
>> +{
>> +	return 0;
>> +}
>> +#endif /* CONFIG_OF_MDIO */
>> +
>> +static int dp83869_configure_rgmii(struct phy_device *phydev,
>> +				   struct dp83869_private *dp83869)
>> +{
>> +	int ret, val;
>> +
>> +	if (phy_interface_is_rgmii(phydev)) {
>> +		val = phy_read(phydev, MII_DP83869_PHYCTRL);
>> +		if (val < 0)
>> +			return val;
>> +		val &= ~DP83869_PHYCR_FIFO_DEPTH_MASK;
>> +		val |= (dp83869->tx_fifo_depth << DP83869_TX_FIFO_SHIFT);
>> +		val |= (dp83869->rx_fifo_depth << DP83869_RX_FIFO_SHIFT);
>> +
>> +		ret = phy_write(phydev, MII_DP83869_PHYCTRL, val);
>> +		if (ret)
>> +			return ret;
>> +		val = phy_read(phydev, MII_DP83869_PHYCTRL);
> Why do you read back the register?
Debug artifact will remove
>
>> +	}
>> +
>> +	if (dp83869->io_impedance >= 0)
>> +		phy_modify_mmd(phydev, DP83869_DEVADDR,
>> +			       DP83869_IO_MUX_CFG,
>> +			       DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
>> +			       dp83869->io_impedance &
>> +			       DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
>> +
>> +	return ret;
>> +}
>> +
>> +static int dp83869_configure_mode(struct phy_device *phydev,
>> +				  struct dp83869_private *dp83869)
>> +{
>> +	int phy_ctrl_val;
>> +	int ret;
>> +
>> +	if (op_mode < DP83869_RGMII_COPPER_ETHERNET ||
>> +	    op_mode > DP83869_SGMII_COPPER_ETHERNET)
>> +		return -EINVAL;
>> +
>> +	if (dp83869->mode != op_mode)
>> +		dp83869->mode = op_mode;
>> +
>> +	/* Below init sequence for each operational mode is defined in
>> +	 * section 9.4.8 of the datasheet.
>> +	 */
>> +	ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
>> +			    dp83869->mode);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = phy_write(phydev, MII_BMCR, MII_DP83869_BMCR_DEFAULT);
>> +	if (ret)
>> +		return ret;
>> +
>> +	phy_ctrl_val = (dp83869->rx_fifo_depth << DP83869_RX_FIFO_SHIFT |
>> +			dp83869->tx_fifo_depth << DP83869_TX_FIFO_SHIFT |
>> +			DP83869_PHY_CTRL_DEFAULT);
>> +
>> +	switch (dp83869->mode) {
>> +	case DP83869_RGMII_COPPER_ETHERNET:
>> +		ret = phy_write(phydev, MII_DP83869_PHYCTRL,
>> +				phy_ctrl_val);
>> +		if (ret)
>> +			return ret;
>> +
>> +		ret = phy_write(phydev, MII_DP83869_CFG1, DP83869_CFG1_DEFAULT);
>> +		if (ret)
>> +			return ret;
>> +
>> +		ret = dp83869_configure_rgmii(phydev, dp83869);
>> +		if (ret)
>> +			return ret;
>> +		break;
>> +	case DP83869_RGMII_SGMII_BRIDGE:
>> +		phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
>> +			       DP83869_SGMII_RGMII_BRIDGE,
>> +			       DP83869_SGMII_RGMII_BRIDGE);
>> +
>> +		ret = phy_write_mmd(phydev, DP83869_DEVADDR,
>> +				    DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
>> +		if (ret)
>> +			return ret;
>> +
>> +		break;
>> +	case DP83869_1000M_MEDIA_CONVERT:
>> +		ret = phy_write(phydev, MII_DP83869_PHYCTRL,
>> +				phy_ctrl_val);
>> +		if (ret)
>> +			return ret;
>> +
>> +		ret = phy_write_mmd(phydev, DP83869_DEVADDR,
>> +				    DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
>> +		if (ret)
>> +			return ret;
>> +		break;
>> +	case DP83869_100M_MEDIA_CONVERT:
>> +		ret = phy_write(phydev, MII_DP83869_PHYCTRL,
>> +				phy_ctrl_val);
>> +		if (ret)
>> +			return ret;
>> +		break;
>> +	case DP83869_SGMII_COPPER_ETHERNET:
>> +		ret = phy_write(phydev, MII_DP83869_PHYCTRL,
>> +				phy_ctrl_val);
>> +		if (ret)
>> +			return ret;
>> +
>> +		ret = phy_write(phydev, MII_DP83869_CFG1, DP83869_CFG1_DEFAULT);
>> +		if (ret)
>> +			return ret;
>> +
>> +		ret = phy_write_mmd(phydev, DP83869_DEVADDR,
>> +				    DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
>> +		if (ret)
>> +			return ret;
>> +
>> +		break;
>> +	case DP83869_RGMII_1000_BASE:
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	};
>> +
>> +	return 0;
>> +}
>> +
>> +static int dp83869_config_init(struct phy_device *phydev)
>> +{
>> +	struct dp83869_private *dp83869;
>> +	int ret, val;
>> +
>> +	if (!phydev->priv) {
>> +		dp83869 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83869),
>> +				       GFP_KERNEL);
> This belongs into the probe callback.
probe callback?  Why do I need a probe function?
>
>> +		if (!dp83869)
>> +			return -ENOMEM;
>> +
>> +		phydev->priv = dp83869;
>> +		ret = dp83869_of_init(phydev);
>> +		if (ret)
>> +			return ret;
>> +	} else {
>> +		dp83869 = (struct dp83869_private *)phydev->priv;
>> +	}
>> +
>> +	ret = dp83869_configure_mode(phydev, dp83869);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/* Enable Interrupt output INT_OE in CFG4 register */
>> +	if (phy_interrupt_is_valid(phydev)) {
>> +		val = phy_read(phydev, DP83869_CFG4);
>> +		val |= BIT(7);
> Better add a constant for this bit.
ack
>
>> +		phy_write(phydev, DP83869_CFG4, val);
>> +	}
>> +
>> +	if (dp83869->port_mirroring != DP83869_PORT_MIRROING_KEEP)
>> +		dp83869_config_port_mirroring(phydev);
>> +
>> +	/* Clock output selection if muxing property is set */
>> +	if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK)
>> +		phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG,
>> +			       DP83869_IO_MUX_CFG_CLK_O_SEL_MASK,
>> +			       dp83869->clk_output_sel <<
>> +			       DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
>> +
>> +	return 0;
>> +}
>> +
>> +static int dp83869_phy_reset(struct phy_device *phydev)
>> +{
>> +	int err;
>> +
>> +	err = phy_write(phydev, DP83869_CTRL, DP83869_SW_RESET);
>> +	if (err < 0)
>> +		return err;
>> +
>> +	usleep_range(10, 20);
>> +
>> +	return dp83869_config_init(phydev);
> If you really need to re-configure the PHY here then it's
> questionnable whether this is still a "soft" reset.
I will need to look at this again to see how the registers are affected 
during a SW reset.  I always wrote the config.
>
>> +}
>> +
>> +static struct phy_driver dp83869_driver[] = {
>> +	{
>> +		.phy_id		= DP83869_PHY_ID,
>> +		.phy_id_mask	= 0xfffffff0,
> You can use PHY_ID_MATCH_MODEL here.
Ack.
>
>> +		.name		= "TI DP83869",
>> +		.features = PHY_GBIT_FIBRE_FEATURES,
> The use of features is deprecated. Check whether feature
> autoprobing works properly for this PHY, else implement the
> get_features callback.
Ack
>> +
>> +		.config_init	= dp83869_config_init,
>> +		.soft_reset	= dp83869_phy_reset,
>> +
>> +		/* IRQ related */
>> +		.ack_interrupt	= dp83869_ack_interrupt,
>> +		.config_intr	= dp83869_config_intr,
>> +
>> +		.suspend	= genphy_suspend,
>> +		.resume		= genphy_resume,
>> +	},
>> +};
>> +module_phy_driver(dp83869_driver);
>> +
>> +static struct mdio_device_id __maybe_unused dp83869_tbl[] = {
>> +	{ DP83869_PHY_ID, 0xfffffff0 },
> You can use PHY_ID_MATCH_MODEL here.

Ack

Dan


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ