| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7F15A2E0-14C7-4C86-B589-35619A390B72@fb.com>
Date: Mon, 25 Nov 2019 19:23:32 +0000
From: Vijay Khemka <vijaykhemka@...com>
To: manikandan-e <manikandan.hcl.ers.epl@...il.com>,
"andrew@...id.au" <andrew@...id.au>
CC: "joel@....id.au" <joel@....id.au>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"manikandan.e@....com" <manikandan.e@....com>
Subject: Re: [PATCH v3] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC
On 11/25/19, 5:04 AM, "manikandan-e" <manikandan.hcl.ers.epl@...il.com> wrote:
The Yosemite V2 is a facebook multi-node server
platform that host four OCP server. The BMC
in the Yosemite V2 platorm based on AST2500 SoC.
This patch adds linux device tree entry related to
Yosemite V2 specific devices connected to BMC SoC.
Nit: comments inline. Otherwise
Reviewed-by: Vijay Khemka <vijaykhemka@...com>
Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@...il.com>
---
.../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 151 +++++++++++++++++++++
1 file changed, 151 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 0000000..09bffcd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook Yosemitev2 BMC";
+ compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+ aliases {
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
bootargs are not required as it is overwritten by uboot. And baud rate is 57600
+ };
+
+ memory@...00000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ iio-hwmon {
+ // VOLATAGE SENSOR
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> ,
+ <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> ,
+ <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+ <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
Use tab for alignment
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&i2c8 {
+ status = "okay";
+ //FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ tmp421@4e {
+ //INLET TEMP
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ //OUTLET TEMP
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ //HSC
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+ //MEZZ_TEMP_SENSOR
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ //MEZZ_FRU
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ //FSC
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+};
--
2.7.4
Powered by blists - more mailing lists