[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1581108026-28170-1-git-send-email-tharvey@gateworks.com>
Date: Fri, 7 Feb 2020 12:40:26 -0800
From: Tim Harvey <tharvey@...eworks.com>
To: netdev@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
davem@...emloft.net, rrichter@...vell.com, sgoutham@...vell.com,
andrew@...n.ch, Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH] net: thunderx: use proper interface type for RGMII
The configuration of the OCTEONTX XCV_DLL_CTL register via
xcv_init_hw() is such that the RGMII RX delay is bypassed
leaving the RGMII TX delay enabled in the MAC:
/* Configure DLL - enable or bypass
* TX no bypass, RX bypass
*/
cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
cfg &= ~0xFF03;
cfg |= CLKRX_BYP;
writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID
and not PHY_INTERFACE_MODE_RGMII.
Fixing this allows RGMII PHY drivers to do the right thing (enable
RX delay in the PHY) instead of erroneously enabling both delays in the
PHY.
Signed-off-by: Tim Harvey <tharvey@...eworks.com>
---
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index c4f6ec0..17a4110 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -1039,7 +1039,7 @@ static int phy_interface_mode(u8 lmac_type)
if (lmac_type == BGX_MODE_QSGMII)
return PHY_INTERFACE_MODE_QSGMII;
if (lmac_type == BGX_MODE_RGMII)
- return PHY_INTERFACE_MODE_RGMII;
+ return PHY_INTERFACE_MODE_RGMII_RXID;
return PHY_INTERFACE_MODE_SGMII;
}
--
2.7.4
Powered by blists - more mailing lists