| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <bfb9c0bb-0c16-5516-d788-bbd2ca86fc58@linux-m68k.org>
Date: Thu, 13 Feb 2020 17:11:17 +1000
From: Greg Ungerer <gerg@...ux-m68k.org>
To: afzal mohammed <afzal.mohd.ma@...il.com>,
linux-m68k@...ts.linux-m68k.org, linux-kernel@...r.kernel.org
Cc: Thomas Gleixner <tglx@...utronix.de>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: Re: [PATCH 06/18] m68k: Replace setup_irq() by request_irq()
Hi Afzal,
On 12/2/20 6:03 pm, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@...il.com>
> ---
>
> Since cc'ing cover letter to all maintainers/reviewers would be too
> many, refer for cover letter,
> https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com
>
> arch/m68k/68000/timers.c | 9 ++-------
> arch/m68k/coldfire/pit.c | 9 ++-------
> arch/m68k/coldfire/sltimers.c | 19 +++++--------------
> arch/m68k/coldfire/timers.c | 19 +++++--------------
> 4 files changed, 14 insertions(+), 42 deletions(-)
>
> diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
> index 71ddb4c98726..7a55d664592e 100644
> --- a/arch/m68k/68000/timers.c
> +++ b/arch/m68k/68000/timers.c
> @@ -68,12 +68,6 @@ static irqreturn_t hw_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction m68328_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = hw_tick,
> -};
> -
> /***************************************************************************/
Remove this comment line as well. Nothing left to separate
between those comment lines with the struct initialization removed.
> static u64 m68328_read_clk(struct clocksource *cs)
> @@ -106,7 +100,8 @@ void hw_timer_init(irq_handler_t handler)
> TCTL = 0;
>
> /* set ISR */
> - setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
> + if (request_irq(TMR_IRQ_NUM, hw_tick, IRQF_TIMER, "timer", NULL))
> + pr_err("request_irq() on %s failed\n", "timer");
>
> /* Restart mode, Enable int, Set clock source */
> TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
> diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
> index eb6f16b0e2e6..d09e253abe5a 100644
> --- a/arch/m68k/coldfire/pit.c
> +++ b/arch/m68k/coldfire/pit.c
> @@ -111,12 +111,6 @@ static irqreturn_t pit_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction pit_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = pit_tick,
> -};
> -
> /***************************************************************************/
Remove this comment line as well.
> static u64 pit_read_clk(struct clocksource *cs)
> @@ -156,7 +150,8 @@ void hw_timer_init(irq_handler_t handler)
> cf_pit_clockevent.min_delta_ticks = 0x3f;
> clockevents_register_device(&cf_pit_clockevent);
>
> - setup_irq(MCF_IRQ_PIT1, &pit_irq);
> + if (request_irq(MCF_IRQ_PIT1, pit_tick, IRQF_TIMER, "timer", NULL))
> + pr_err("request_irq() on %s failed\n", "timer");
>
> clocksource_register_hz(&pit_clk, FREQ);
> }
> diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
> index 1b11e7bacab3..2188a21e5413 100644
> --- a/arch/m68k/coldfire/sltimers.c
> +++ b/arch/m68k/coldfire/sltimers.c
> @@ -50,18 +50,14 @@ irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
> return IRQ_HANDLED;
> }
>
> -static struct irqaction mcfslt_profile_irq = {
> - .name = "profile timer",
> - .flags = IRQF_TIMER,
> - .handler = mcfslt_profile_tick,
> -};
> -
> void mcfslt_profile_init(void)
> {
> printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
> PROFILEHZ);
>
> - setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
> + if (request_irq(MCF_IRQ_PROFILER, mcfslt_profile_tick, IRQF_TIMER,
> + "profile timer", NULL))
> + pr_err("request_irq() on %s failed\n", "profile timer");
>
> /* Set up TIMER 2 as high speed profile clock */
> __raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
> @@ -92,12 +88,6 @@ static irqreturn_t mcfslt_tick(int irq, void *dummy)
> return timer_interrupt(irq, dummy);
> }
>
> -static struct irqaction mcfslt_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = mcfslt_tick,
> -};
> -
> static u64 mcfslt_read_clk(struct clocksource *cs)
> {
> unsigned long flags;
> @@ -140,7 +130,8 @@ void hw_timer_init(irq_handler_t handler)
> mcfslt_cnt = mcfslt_cycles_per_jiffy;
>
> timer_interrupt = handler;
> - setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
> + if (request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL))
> + pr_err("request_irq() on %s failed\n", "timer");
>
> clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
>
> diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
> index 227aa5d13709..f384e92d8b1c 100644
> --- a/arch/m68k/coldfire/timers.c
> +++ b/arch/m68k/coldfire/timers.c
> @@ -82,12 +82,6 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction mcftmr_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = mcftmr_tick,
> -};
> -
> /***************************************************************************/
Remove comment line here too.
> static u64 mcftmr_read_clk(struct clocksource *cs)
> @@ -134,7 +128,8 @@ void hw_timer_init(irq_handler_t handler)
>
> timer_interrupt = handler;
> init_timer_irq();
> - setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
> + if (request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL))
> + pr_err("request_irq() on %s failed\n", "timer");
>
> #ifdef CONFIG_HIGHPROFILE
> coldfire_profile_init();
> @@ -170,12 +165,6 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction coldfire_profile_irq = {
> - .name = "profile timer",
> - .flags = IRQF_TIMER,
> - .handler = coldfire_profile_tick,
> -};
> -
> void coldfire_profile_init(void)
> {
> printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
> @@ -188,7 +177,9 @@ void coldfire_profile_init(void)
> __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
> MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
>
> - setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
> + if (request_irq(MCF_IRQ_PROFILER, coldfire_profile_tick, IRQF_TIMER,
> + "profile timer", NULL))
> + pr_err("request_irq() on %s failed\n", "profile timer");
> }
>
> /***************************************************************************/
I tested this out on ColdFire hardware I have, worked fine.
All defconfigs still compiled too.
Regards
Greg
Powered by blists - more mailing lists