| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200316103726.16339-3-wan.ahmad.zainie.wan.mohamad@intel.com>
Date: Mon, 16 Mar 2020 18:37:26 +0800
From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>
To: kishon@...com, robh+dt@...nel.org, mark.rutland@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
wan.ahmad.zainie.wan.mohamad@...el.com
Subject: [PATCH 2/2] phy: intel: Add Keem Bay eMMC PHY support
Add support for eMMC PHY on Intel Keem Bay SoC.
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>
---
drivers/phy/intel/Kconfig | 7 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-keembay-emmc.c | 231 +++++++++++++++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 drivers/phy/intel/phy-keembay-emmc.c
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index 4ea6a8897cd7..56dc4d817c5f 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -7,3 +7,10 @@ config PHY_INTEL_EMMC
select GENERIC_PHY
help
Enable this to support the Intel EMMC PHY
+
+config PHY_KEEMBAY_EMMC
+ tristate "Intel Keem Bay EMMC PHY Driver"
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Keem Bay EMMC PHY.
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 6b876a75599d..bdf769671198 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o
+obj-$(CONFIG_PHY_KEEMBAY_EMMC) += phy-keembay-emmc.o
diff --git a/drivers/phy/intel/phy-keembay-emmc.c b/drivers/phy/intel/phy-keembay-emmc.c
new file mode 100644
index 000000000000..490c0f79dc8d
--- /dev/null
+++ b/drivers/phy/intel/phy-keembay-emmc.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay eMMC PHY driver
+ * Copyright (C) 2019 Intel Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* eMMC/SD/SDIO core/phy configuration registers */
+#define PHY_CFG_0 0x24
+#define SEL_DLY_TXCLK_MASK BIT(29)
+#define SEL_DLY_TXCLK_SHIFT 29
+#define OTAP_DLY_ENA_MASK BIT(27)
+#define OTAP_DLY_ENA_SHIFT 27
+#define OTAP_DLY_SEL_MASK GENMASK(26, 23)
+#define OTAP_DLY_SEL_SHIFT 23
+#define DLL_EN_MASK BIT(10)
+#define DLL_EN_SHIFT 10
+#define PWR_DOWN_MASK BIT(0)
+#define PWR_DOWN_SHIFT 0
+
+#define PHY_CFG_2 0x2c
+#define SEL_FREQ_MASK GENMASK(12, 10)
+#define SEL_FREQ_SHIFT 10
+
+#define PHY_STAT 0x40
+#define CAL_DONE BIT(6)
+#define DLL_RDY BIT(5)
+
+/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
+#define FREQSEL_200M_170M 0x0
+#define FREQSEL_170M_140M 0x1
+#define FREQSEL_140M_110M 0x2
+#define FREQSEL_110M_80M 0x3
+#define FREQSEL_80M_50M 0x4
+
+struct keembay_emmc_phy {
+ struct regmap *reg_base;
+ struct clk *emmcclk;
+};
+
+static int keembay_emmc_phy_power(struct phy *phy, bool power_on)
+{
+ struct keembay_emmc_phy *kmb_phy = phy_get_drvdata(phy);
+ unsigned int freqsel = FREQSEL_200M_170M;
+ unsigned long rate;
+ u32 val;
+ int ret;
+
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, PWR_DOWN_MASK,
+ (0x0 << PWR_DOWN_SHIFT) & PWR_DOWN_MASK);
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, DLL_EN_MASK,
+ (0x0 << DLL_EN_SHIFT) & DLL_EN_MASK);
+
+ if (!power_on)
+ return 0;
+
+ rate = clk_get_rate(kmb_phy->emmcclk);
+
+ if (rate != 0) {
+ switch (rate) {
+ case 170000001 ... 200000000:
+ freqsel = FREQSEL_200M_170M;
+ break;
+ case 140000001 ... 170000000:
+ freqsel = FREQSEL_170M_140M;
+ break;
+ case 110000001 ... 140000000:
+ freqsel = FREQSEL_140M_110M;
+ break;
+ case 80000001 ... 110000000:
+ freqsel = FREQSEL_110M_80M;
+ break;
+ case 50000000 ... 80000000:
+ freqsel = FREQSEL_80M_50M;
+ break;
+ default:
+ break;
+ }
+
+ if ((rate < 50000000) || (rate > 200000000))
+ dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+ }
+
+ udelay(5);
+
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, PWR_DOWN_MASK,
+ (0x1 << PWR_DOWN_SHIFT) & PWR_DOWN_MASK);
+
+ ret = regmap_read_poll_timeout(kmb_phy->reg_base, PHY_STAT,
+ val, (val & CAL_DONE),
+ 0, 50 * USEC_PER_MSEC);
+ if (ret) {
+ dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ /* Set the frequency of the DLL operation */
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_2, SEL_FREQ_MASK,
+ (freqsel << SEL_FREQ_SHIFT) & SEL_FREQ_MASK);
+
+ /* Enable DLL */
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, DLL_EN_MASK,
+ (0x1 << DLL_EN_SHIFT) & DLL_EN_MASK);
+
+ if (rate == 0)
+ return 0;
+
+ ret = regmap_read_poll_timeout(kmb_phy->reg_base, PHY_STAT,
+ val, (val & DLL_RDY),
+ 0, 50 * USEC_PER_MSEC);
+ if (ret) {
+ dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int keembay_emmc_phy_init(struct phy *phy)
+{
+ struct keembay_emmc_phy *kmb_phy = phy_get_drvdata(phy);
+
+ kmb_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
+ if (IS_ERR(kmb_phy->emmcclk)) {
+ dev_dbg(&phy->dev, "Error getting emmcclk\n");
+ kmb_phy->emmcclk = NULL;
+ }
+
+ return 0;
+}
+
+static int keembay_emmc_phy_exit(struct phy *phy)
+{
+ struct keembay_emmc_phy *kmb_phy = phy_get_drvdata(phy);
+
+ clk_put(kmb_phy->emmcclk);
+
+ return 0;
+};
+
+static int keembay_emmc_phy_power_on(struct phy *phy)
+{
+ struct keembay_emmc_phy *kmb_phy = phy_get_drvdata(phy);
+
+ /* Select the Delay chain based txclk */
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ (0x1 << SEL_DLY_TXCLK_SHIFT) & SEL_DLY_TXCLK_MASK);
+
+ /* Output TAP Delay Enable */
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ (0x1 << OTAP_DLY_ENA_SHIFT) & OTAP_DLY_ENA_MASK);
+
+ /* Output TAP Delay Select */
+ regmap_update_bits(kmb_phy->reg_base, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ (0x2 << OTAP_DLY_SEL_SHIFT) & OTAP_DLY_SEL_MASK);
+
+ return keembay_emmc_phy_power(phy, 1);
+}
+
+static int keembay_emmc_phy_power_off(struct phy *phy)
+{
+ return keembay_emmc_phy_power(phy, 0);
+}
+
+static const struct phy_ops ops = {
+ .init = keembay_emmc_phy_init,
+ .exit = keembay_emmc_phy_exit,
+ .power_on = keembay_emmc_phy_power_on,
+ .power_off = keembay_emmc_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int keembay_emmc_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct keembay_emmc_phy *kmb_phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -ENODEV;
+
+ kmb_phy = devm_kzalloc(dev, sizeof(*kmb_phy), GFP_KERNEL);
+ if (!kmb_phy)
+ return -ENOMEM;
+
+ kmb_phy->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "intel,syscon");
+ if (IS_ERR(kmb_phy->reg_base)) {
+ dev_err(dev, "failed to find syscon\n");
+ return PTR_ERR(kmb_phy->reg_base);
+ }
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, kmb_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id keembay_emmc_phy_of_match[] = {
+ { .compatible = "intel,keembay-emmc-phy" },
+ {}
+};
+
+static struct platform_driver keembay_emmc_phy_driver = {
+ .probe = keembay_emmc_phy_probe,
+ .driver = {
+ .name = "keembay-emmc-phy",
+ .of_match_table = keembay_emmc_phy_of_match,
+ },
+};
+module_platform_driver(keembay_emmc_phy_driver);
+
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>");
+MODULE_DESCRIPTION("Keem Bay EMMC PHY driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
Powered by blists - more mailing lists