| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAhV-H57na90xg0+cXeGC_rih9wiZBEZcVm+3AnY90To19wqbw@mail.gmail.com>
Date: Wed, 25 Mar 2020 10:11:05 +0800
From: Huacai Chen <chenhc@...ote.com>
To: Jiaxun Yang <jiaxun.yang@...goat.com>
Cc: "open list:MIPS" <linux-mips@...r.kernel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Allison Randal <allison@...utok.net>,
LKML <linux-kernel@...r.kernel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v6 09/11] MIPS: Loongson64: Add generic dts
Hi, Jiaxun,
On Tue, Mar 24, 2020 at 11:40 PM Jiaxun Yang <jiaxun.yang@...goat.com> wrote:
>
> Add generic device dts for Loongson-3 devices.
> They are currently almost identical but will be different later.
> Some PCH devices like PCI Host Bridge is still enabled by platform
> code for now.
>
> Co-developed-by: Huacai Chen <chenhc@...ote.com>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@...goat.com>
> ---
> arch/mips/Kconfig | 6 +-
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/loongson/Makefile | 4 ++
> .../boot/dts/loongson/loongson3-package.dtsi | 62 +++++++++++++++++++
> .../dts/loongson/loongson3_4core_rs780e.dts | 25 ++++++++
> .../dts/loongson/loongson3_8core_rs780e.dts | 25 ++++++++
> arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 26 ++++++++
> 7 files changed, 147 insertions(+), 2 deletions(-)
> create mode 100644 arch/mips/boot/dts/loongson/Makefile
> create mode 100644 arch/mips/boot/dts/loongson/loongson3-package.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/rs780e-pch.dtsi
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index ca3045b2a2d9..4a0b2f494d79 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -486,9 +486,11 @@ config MACH_LOONGSON64
> select SYS_SUPPORTS_HIGHMEM
> select SYS_SUPPORTS_LITTLE_ENDIAN
> select SYS_SUPPORTS_ZBOOT
> - select LOONGSON_MC146818
> select ZONE_DMA32
> select NUMA
> + select COMMON_CLK
> + select USE_OF
> + select BUILTIN_DTB
> help
> This enables the support of Loongson-2/3 family of machines.
>
> @@ -3081,7 +3083,7 @@ endchoice
> choice
> prompt "Kernel command line type" if !CMDLINE_OVERRIDE
> default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
> - !MIPS_MALTA && \
> + !MACH_LOONGSON64 && !MIPS_MALTA && \
> !CAVIUM_OCTEON_SOC
> default MIPS_CMDLINE_FROM_BOOTLOADER
>
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 1e79cab8e269..d429a69bfe30 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -4,6 +4,7 @@ subdir-y += cavium-octeon
> subdir-y += img
> subdir-y += ingenic
> subdir-y += lantiq
> +subdir-y += loongson
> subdir-y += mscc
> subdir-y += mti
> subdir-y += netlogic
> diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
> new file mode 100644
> index 000000000000..56d379471262
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX_License_Identifier: GPL_2.0
> +dtb-$(CONFIG_MACH_LOONGSON64) += loongson3_4core_rs780e.dtb loongson3_8core_rs780e.dtb
> +
> +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
> diff --git a/arch/mips/boot/dts/loongson/loongson3-package.dtsi b/arch/mips/boot/dts/loongson/loongson3-package.dtsi
> new file mode 100644
> index 000000000000..d09c313603f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson3-package.dtsi
> @@ -0,0 +1,62 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
I still add something like this here:
cpu@0 {
compatible = "loongson,loongson3";
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&scache0>;
};
Because it at least solve the problem of cache hierarchy, which cause
"lscpu" crash.
> + cpuintc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "mti,cpu-interrupt-controller";
> + };
> +
> + package0: bus@...00000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
> + 0 0x3ff00000 0 0x3ff00000 0x100000
> + 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000 /* 3A HT Config Space */
> + 0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000 /* 3B HT Config Space */>;
> +
> + liointc: interrupt-controller@...01400 {
> + compatible = "loongson,liointc-1.0";
> + reg = <0 0x3ff01400 0x64>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&cpuintc>;
> + interrupts = <2>, <3>;
> + interrupt-names = "int0", "int1";
> +
> + loongson,parent_int_map = <0xf0ffffff>, /* int0 */
> + <0x0f000000>, /* int1 */
> + <0x00000000>, /* int2 */
> + <0x00000000>; /* int3 */
> +
> + };
> +
> + cpu_uart0: serial@...001e0 {
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e0 0x8>;
> + clock-frequency = <33000000>;
> + interrupt-parent = <&liointc>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + no-loopback-test;
> + };
> +
> + cpu_uart1: serial@...001e8 {
> + status = "disabled";
Why disable UART1 by default, is it cause problems?
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e8 0x8>;
> + clock-frequency = <33000000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&liointc>;
> + no-loopback-test;
> + };
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts
> new file mode 100644
> index 000000000000..6b5694ca0f95
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "loongson3-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,loongson3-4core-rs780e";
> +};
> +
> +&package0 {
> + htpic: interrupt-controller@...fb000080 {
> + compatible = "loongson,htpic-1.0";
> + reg = <0xefd 0xfb000080 0x40>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&liointc>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
> + <25 IRQ_TYPE_LEVEL_HIGH>,
> + <26 IRQ_TYPE_LEVEL_HIGH>,
> + <27 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts
> new file mode 100644
> index 000000000000..ffefa2f829b0
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "loongson3-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,loongson3-8core-rs780e";
> +};
> +
> +&package0 {
> + htpic: interrupt-controller@...dfb000080 {
> + compatible = "loongson,htpic-1.0";
> + reg = <0x1efd 0xfb000080 0x40>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&liointc>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
> + <25 IRQ_TYPE_LEVEL_HIGH>,
> + <26 IRQ_TYPE_LEVEL_HIGH>,
> + <27 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
> new file mode 100644
> index 000000000000..45c54d555fa4
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/ {
> + bus@...00000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0x10000000 0 0x10000000 0 0x10000000
> + 0 0x40000000 0 0x40000000 0 0x40000000
> + 0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
> +
> + isa {
> + compatible = "isa";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <1 0 0 0 0x1000>;
> +
> + rtc0: rtc@70 {
> + compatible = "motorola,mc146818";
> + reg = <1 0x70 0x8>;
> + interrupts = <8>;
> + interrupt-parent = <&htpic>;
> + };
> + };
> + };
> +};
> --
> 2.26.0.rc2
>
>
Regards,
Huacai
Powered by blists - more mailing lists