| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200410164905.GA719@bogus>
Date: Fri, 10 Apr 2020 11:49:05 -0500
From: Rob Herring <robh@...nel.org>
To: David Heidelberg <david@...t.cz>
Cc: Sebastian Reichel <sre@...nel.org>,
Jonghwa Lee <jonghwa3.lee@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Myungjoo Ham <myungjoo.ham@...sung.com>,
Sumit Semwal <sumit.semwal@...aro.org>,
John Stultz <john.stultz@...aro.org>,
Vinay Simha BN <simhavcs@...il.com>,
mika.westerberg@...ux.intel.com, ramakrishna.pallala@...el.com,
Dmitry Osipenko <digetx@...il.com>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 4/9] dt-bindings: power: supply: Add device-tree binding
for Summit SMB3xx
On Sun, Mar 29, 2020 at 06:21:23PM +0200, David Heidelberg wrote:
> Summit SMB3xx series is a Programmable Switching Li+ Battery Charger.
> This device-tree binding documents Summit SMB345, SMB347 and SMB358 chargers.
>
> Signed-off-by: David Heidelberg <david@...t.cz>
> ---
> .../power/supply/summit,smb347-charger.yaml | 224 ++++++++++++++++++
> .../dt-bindings/power/summit,smb347-charger.h | 19 ++
> 2 files changed, 243 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> create mode 100644 include/dt-bindings/power/summit,smb347-charger.h
>
> diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> new file mode 100644
> index 000000000000..1d6bccdcd233
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> @@ -0,0 +1,224 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Battery charger driver for SMB345, SMB347 and SMB358
> +
> +maintainers:
> + - David Heidelberg <david@...t.cz>
> +
> +properties:
> + compatible:
> + enum:
> + - summit,smb345
> + - summit,smb347
> + - summit,smb358
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + summit,enable-usb-charging:
> + type: boolean
> + description: Enable charging trough USB.
> +
> + summit,enable-otg-charging:
> + type: boolean
> + description: Provide power for USB OTG
> +
> + summit,enable-mains-charging:
> + type: boolean
> + description: Enable charging trough mains
> +
> + summit,enable-chg-ctrl:
> + description: Enable charging control
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum:
> + - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
> + - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
> + - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
> +
> + summit,max-chg-curr:
> + description: Maximum current for charging (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + summit,max-chg-volt:
> + description: Maximum voltage for charging (in uV)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 3500000
> + maximum: 4500000
> +
> + summit,pre-chg-curr:
> + description: Pre-charging current for charging (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + summit,term-curr:
> + description: Charging cycle termination current (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + summit,fast-volt-threshold:
> + description: Voltage threshold to transit to fast charge mode (in uV)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 2400000
> + maximum: 3000000
> +
> + summit,mains-curr-limit:
> + description: Maximum input current from AC/DC input (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + summit,usb-curr-limit:
> + description: Maximum input current from USB input (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
These are all properties of the battery attached and we have standard
properties for some/all of these.
Also, any property with units should have a unit suffix as defined in
property-units.txt. And with that, you don't need to define the type.
> +
> + summit,chg-curr-comp:
> + description: Charge current compensation (in uA)
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + summit,chip-temp-threshold:
> + description: Chip temperature for thermal regulation in °C.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [100, 110, 120, 130]
> +
> + summit,soft-cold-temp-limit:
> + description: Cold battery temperature in °C for soft alarm.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 5, 10, 15]
> +
> + summit,soft-hot-temp-limit:
> + description: Hot battery temperature in °C for soft alarm.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [40, 45, 50, 55]
> +
> + summit,hard-cold-temp-limit:
> + description: Cold battery temperature in °C for hard alarm.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/int32
> + enum: [-5, 0, 5, 10]
> +
> + summit,hard-hot-temp-limit:
> + description: Hot battery temperature in °C for hard alarm.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [50, 55, 60, 65]
> +
> + summit,soft-comp-method:
> + description: Soft temperature limit compensation method
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum:
> + - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
> + - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
> + - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + enum:
> + - summit,smb345
> + - summit,smb358
> +
> + then:
> + properties:
> + summit,max-chg-curr:
> + enum: [ 200000, 450000, 600000, 900000,
> + 1300000, 1500000, 1800000, 2000000]
> +
> + summit,pre-chg-curr:
> + enum: [150000, 250000, 350000, 450000]
> +
> + summit,term-curr:
> + enum: [ 30000, 40000, 60000, 80000,
> + 100000, 125000, 150000, 200000]
> +
> + summit,mains-curr-limit:
> + enum: [ 300000, 500000, 700000, 1000000,
> + 1500000, 1800000, 2000000]
> +
> + summit,usb-curr-limit:
> + enum: [ 300000, 500000, 700000, 1000000,
> + 1500000, 1800000, 2000000]
> +
> + summit,chg-curr-comp:
> + enum: [200000, 450000, 600000, 900000]
> +
> + else:
> + properties:
> + summit,max-chg-curr:
> + enum: [ 700000, 900000, 1200000, 1500000,
> + 1800000, 2000000, 2200000, 2500000]
> +
> + summit,pre-chg-curr:
> + enum: [100000, 150000, 200000, 250000]
> +
> + summit,term-curr:
> + enum: [ 37500, 50000, 100000, 150000,
> + 200000, 250000, 500000, 600000]
> +
> + summit,mains-curr-limit:
> + enum: [ 300000, 500000, 700000, 900000, 1200000,
> + 1500000, 1800000, 2000000, 2200000, 2500000]
> +
> + summit,usb-curr-limit:
> + enum: [ 300000, 500000, 700000, 900000, 1200000,
> + 1500000, 1800000, 2000000, 2200000, 2500000]
> +
> + summit,chg-curr-comp:
> + enum: [250000, 700000, 900000, 1200000]
> +
> +required:
> + - compatible
> + - reg
> +
> +anyOf:
> + - required:
> + - summit,enable-usb-charging
> + - required:
> + - summit,enable-otg-charging
> + - required:
> + - summit,enable-mains-charging
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/power/summit,smb347-charger.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + charger@7f {
> + compatible = "summit,smb347";
> + reg = <0x7f>;
> + status = "okay";
> +
> + summit,max-chg-curr = <1800000>;
> + summit,mains-curr-limit = <2000000>;
> + summit,usb-curr-limit = <500000>;
> +
> + summit,chip-temp-threshold = <110>;
> + summit,soft-cold-temp-limit = <5>;
> +
> + summit,enable-usb-charging;
> + summit,enable-mains-charging;
> +
> + summit,enable-chg-ctrl = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
> + };
> + };
> diff --git a/include/dt-bindings/power/summit,smb347-charger.h b/include/dt-bindings/power/summit,smb347-charger.h
> new file mode 100644
> index 000000000000..d918bf321a71
> --- /dev/null
> +++ b/include/dt-bindings/power/summit,smb347-charger.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: (GPL-2.0-or-later or MIT) */
> +/*
> + * Author: David Heidelberg <david@...t.cz>
> + */
> +
> +#ifndef _DT_BINDINGS_SMB347_CHARGER_H
> +#define _DT_BINDINGS_SMB347_CHARGER_H
> +
> +/* Charging compensation method */
> +#define SMB3XX_SOFT_TEMP_COMPENSATE_NONE 0
> +#define SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT 1
> +#define SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE 2
> +
> +/* Charging enable control */
> +#define SMB3XX_CHG_ENABLE_SW 0
> +#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW 1
> +#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH 2
> +
> +#endif
> --
> 2.25.0
>
Powered by blists - more mailing lists