lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200629060338.10705-1-hildawu@realtek.com>
Date:   Mon, 29 Jun 2020 14:03:38 +0800
From:   <hildawu@...ltek.com>
To:     <marcel@...tmann.org>
CC:     <johan.hedberg@...il.com>, <matthias.bgg@...il.com>,
        <linux-bluetooth@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>, <max.chou@...ltek.com>,
        <alex_lu@...lsil.com.cn>, <kidman@...ltek.com>
Subject: [PATCH] Bluetooth: btusb: WBS support USB alternate setting 1

From: Hilda Wu <hildawu@...ltek.com>

For WBS support, btusb driver could be set to alternate setting 1.

Signed-off-by: Hilda Wu <hildawu@...ltek.com>
---
 drivers/bluetooth/btusb.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c7cc8e594166..7942f9314fd7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -453,6 +453,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 #define BTUSB_HW_RESET_ACTIVE	12
 #define BTUSB_TX_WAIT_VND_EVT	13
 #define BTUSB_WAKEUP_DISABLE	14
+#define BTUSB_WBS_ALT1		15
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -1666,14 +1667,18 @@ static void btusb_work(struct work_struct *work)
 				new_alts = data->sco_num;
 			}
 		} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
-
-			data->usb_alt6_packet_flow = true;
-
 			/* Check if Alt 6 is supported for Transparent audio */
-			if (btusb_find_altsetting(data, 6))
+			if (btusb_find_altsetting(data, 6)) {
+				data->usb_alt6_packet_flow = true;
 				new_alts = 6;
-			else
+			} else if (test_bit(BTUSB_WBS_ALT1, &data->flags)) {
+				if (btusb_find_altsetting(data, 1))
+					new_alts = 1;
+				else
+					bt_dev_err(hdev, "Device does not support ALT setting 1");
+			} else {
 				bt_dev_err(hdev, "Device does not support ALT setting 6");
+			}
 		}
 
 		if (btusb_switch_alt_setting(hdev, new_alts) < 0)
@@ -3965,6 +3970,7 @@ static int btusb_probe(struct usb_interface *intf,
 		 * (DEVICE_REMOTE_WAKEUP)
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
+		set_bit(BTUSB_WBS_ALT1, &data->flags);
 
 		err = usb_autopm_get_interface(intf);
 		if (err < 0)
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ