[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200724132457.7094-1-pali@kernel.org>
Date: Fri, 24 Jul 2020 15:24:57 +0200
From: Pali Rohár <pali@...nel.org>
To: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: [PATCH] pinctrl: armada-37xx: Add comment for pcie1_reset pin group
Group name 'pcie1' is misleading as it controls only PCIe reset pin. Like
other PCIe groups it should have been called 'pcie1_reset'. But due to
backward compatibility it is not possible to change existing group name.
So just add comment describing this PCIe reset functionality.
Signed-off-by: Pali Rohár <pali@...nel.org>
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 2bbc69b4dc99..d5b6c0a1c54a 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -316,7 +316,7 @@
};
pcie_reset_pins: pcie-reset-pins {
- groups = "pcie1";
+ groups = "pcie1"; /* this actually controls "pcie1_reset" */
function = "gpio";
};
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 5f125bd6279d..8fd8b2af9216 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -196,7 +196,7 @@ static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
PIN_GRP_GPIO("sdio_sb", 24, 6, BIT(2), "sdio"),
PIN_GRP_GPIO("rgmii", 6, 12, BIT(3), "mii"),
PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
- PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"),
+ PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"), /* this actually controls "pcie1_reset" */
PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
PIN_GRP_GPIO("pcie1_wakeup", 5, 1, BIT(10), "pcie"),
PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
--
2.20.1
Powered by blists - more mailing lists