[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200825094444.GA2311453@BV030612LT>
Date: Tue, 25 Aug 2020 12:44:44 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Andreas Färber <afaerber@...e.de>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-actions@...ts.infradead.org
Subject: Re: [PATCH v5 0/3] Add Actions Semi Owl family sirq support
On Tue, Aug 25, 2020 at 07:39:32AM +0530, Manivannan Sadhasivam wrote:
>
>
> On 23 August 2020 4:35:13 AM IST, Cristian Ciocaltea <cristian.ciocaltea@...il.com> wrote:
> >Hi Mani,
> >
> >On Sat, Aug 22, 2020 at 06:47:12PM +0530, Manivannan Sadhasivam wrote:
> >> Hi Cristi,
> >>
> >> On Wed, Aug 19, 2020 at 07:37:55PM +0300, Cristian Ciocaltea wrote:
> >> > This patch series adds support for the external interrupt
> >controller
> >> > (SIRQ) found in the Actions Semi Owl family of SoC's (S500, S700
> >and
> >> > S900). The controller handles up to 3 external interrupt lines
> >through
> >> > dedicated SIRQ pins.
> >> >
> >> > This is a rework of the patch series submitted some time ago by
> >> > Parthiban Nallathambi:
> >> > https://lore.kernel.org/lkml/20181126100356.2840578-1-pn@denx.de/
> >> >
> >>
> >> You need to preserve the authorship while reposting the patches. If
> >you'd
> >> like to take the authorship intentionally then please explain the
> >reason in
> >> cover letter.
> >>
> >> Thanks,
> >> Mani
> >
> >Thanks for pointing this out, I was not aware of the procedure - this
> >is
> >actually my very first repost. Could you please indicate how should I
> >proceed to fix this? I had absolutely no intention to take the
> >authorship..
> >
>
> Below command would change the author of last commit:
>
> git commit --amend --author="Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>"
Got it now, for some reason I have lost original author information in
my local repository - I'll pay more attention to this next time.
I will submit the fix after receiving Rob's review for the binding doc,
if that would be ok.
Thanks,
Cristi
> >Sorry for the mistake,
>
> No issues!
>
> Thanks,
> Mani
>
> >Cristi
> >
> >> > Please note I have dropped, for the moment, the S700 related
> >patches
> >> > since I do not own a compatible hardware for testing. I'm using
> >instead
> >> > an S500 SoC based board for which I have already provided the
> >initial
> >> > support:
> >> >
> >https://lore.kernel.org/lkml/cover.1592123160.git.cristian.ciocaltea@gmail.com/
> >> >
> >> > The SIRQ controller support is a prerequisite of the soon to be
> >submitted
> >> > MFD driver for the Actions Semi ATC260x PMICs.
> >> >
> >> > Thanks and regards,
> >> > Cristi
> >> >
> >> > Changes in v5:
> >> > - Integrated Marc's review (more details in the driver patch
> >changelog)
> >> > - Rebased patch series on v5.9-rc1
> >> >
> >> > Changes in v4:
> >> > - Simplified the DTS structure:
> >> > * dropped 'actions,sirq-shared-reg' node, now the differentiation
> >> > between SoC variants is handled now via the compatible property
> >> > * dropped 'actions,sirq-reg-offset', now controller base address
> >in
> >> > DTS points to SIRQ0 register, so no additional information is
> >> > required for S500 and S700, while for S900 SoC the offsets of
> >SIRQ1
> >> > and SIRQ2 regs are provided by the driver
> >> > * 'actions,ext-irq-range' was replaced with
> >'actions,ext-interrupts',
> >> > an array of the GIC interrupts triggered by the controller
> >> > - Fixed wrong INTC_EXTCTL_TYPE_MASK definition
> >> > - Removed redundant irq_fwspec checks in owl_sirq_domain_alloc()
> >> > - Improved error handling in owl_sirq_of_init()
> >> > - Added yaml binding document
> >> > - Dropped S700 related DTS patches for lack of testing hardware:
> >> > * arm64: dts: actions: Add sirq node for Actions Semi S700
> >> > * arm64: dts: actions: s700-cubieboard7: Enable SIRQ
> >> > - Updated MAINTAINERS
> >> > - Rebased patchset on kernel v5.8
> >> > - Cosmetic changes
> >> > * Ordered include statements alphabetically
> >> > * Added comment to owl_sirq_set_type() describing conversion of
> >falling
> >> > edge or active low signals
> >> > * Replaced IRQF_TRIGGER_* with corresponding IRQ_TYPE_* variants
> >> > * Ensured data types and function naming are consistent regarding
> >the
> >> > 'owl_sirq' prefix
> >> >
> >> > Changes in v3 (Parthiban Nallathambi):
> >> > - Set default operating frequency to 24MHz
> >> > - Falling edge and Low Level interrupts translated to rising edge
> >and high level
> >> > - Introduced common function with lock handling for register read
> >and write
> >> > - Used direct GIC interrupt number for interrupt local hwirq and
> >finding offset
> >> > using DT entry (range) when registers are shared
> >> > - Changed irq_ack to irq_eoi
> >> > - Added translation method for irq_domain_ops
> >> > - Clearing interrupt pending based on bitmask for edge triggered
> >> > - Added pinctrl definition for sirq for cubieboard7. This depends
> >on,
> >> > https://lore.kernel.org/patchwork/patch/1012859/
> >> >
> >> > Changes in v2 (Parthiban Nallathambi):
> >> > - Added SIRQ as hierarchical chip
> >> > GIC <----> SIRQ <----> External interrupt controller/Child
> >devices
> >> > - Device binding updates with vendor prefix
> >> > - Register sharing handled globally and common init sequence/data
> >for all
> >> > actions SoC family
> >> >
> >> > Cristian Ciocaltea (3):
> >> > dt-bindings: interrupt-controller: Add Actions SIRQ controller
> >binding
> >> > irqchip: Add Actions Semi Owl SIRQ controller
> >> > MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
> >> >
> >> > .../actions,owl-sirq.yaml | 68 ++++
> >> > MAINTAINERS | 2 +
> >> > drivers/irqchip/Makefile | 1 +
> >> > drivers/irqchip/irq-owl-sirq.c | 347
> >++++++++++++++++++
> >> > 4 files changed, 418 insertions(+)
> >> > create mode 100644
> >Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
> >> > create mode 100644 drivers/irqchip/irq-owl-sirq.c
> >> >
> >> > --
> >> > 2.28.0
> >> >
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
Powered by blists - more mailing lists