| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201224111627.32590-14-kishon@ti.com>
Date: Thu, 24 Dec 2020 16:46:25 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>, Nishanth Menon <nm@...com>,
Philipp Zabel <p.zabel@...gutronix.de>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v3 13/15] arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
.../dts/ti/k3-j721e-common-proc-board.dts | 4 ++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 58 ++++++++++---------
2 files changed, 34 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 60764366e22b..86f7ab511ee8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -635,6 +635,10 @@
status = "disabled";
};
+&cmn_refclk1 {
+ clock-frequency = <100000000>;
+};
+
&serdes0 {
serdes0_pcie_link: link@0 {
reg = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 9d1edce31829..20cb390d33b0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -8,6 +8,20 @@
#include <dt-bindings/mux/mux.h>
#include <dt-bindings/mux/ti-serdes.h>
+/ {
+ cmn_refclk: cmn-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ cmn_refclk1: cmn-refclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+};
+
&cbass_main {
msmc_ram: sram@...00000 {
compatible = "mmio-sram";
@@ -336,24 +350,12 @@
pinctrl-single,function-mask = <0xffffffff>;
};
- dummy_cmn_refclk: dummy-cmn-refclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- };
-
- dummy_cmn_refclk1: dummy-cmn-refclk1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- };
-
serdes_wiz0: wiz@...0000 {
compatible = "ti,j721e-wiz-16g";
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
@@ -362,21 +364,21 @@
ranges = <0x5000000 0x0 0x5000000 0x10000>;
wiz0_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 292 11>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_pll0_refclk>;
assigned-clock-parents = <&k3_clks 292 11>;
};
wiz0_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_pll1_refclk>;
assigned-clock-parents = <&k3_clks 292 0>;
};
wiz0_refclk_dig: refclk-dig {
- clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&k3_clks 292 11>;
@@ -438,7 +440,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
@@ -447,21 +449,21 @@
ranges = <0x5010000 0x0 0x5010000 0x10000>;
wiz1_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 293 13>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_pll0_refclk>;
assigned-clock-parents = <&k3_clks 293 13>;
};
wiz1_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 293 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_pll1_refclk>;
assigned-clock-parents = <&k3_clks 293 0>;
};
wiz1_refclk_dig: refclk-dig {
- clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_refclk_dig>;
assigned-clock-parents = <&k3_clks 293 13>;
@@ -523,7 +525,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
@@ -532,21 +534,21 @@
ranges = <0x5020000 0x0 0x5020000 0x10000>;
wiz2_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 294 11>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_pll0_refclk>;
assigned-clock-parents = <&k3_clks 294 11>;
};
wiz2_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 294 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_pll1_refclk>;
assigned-clock-parents = <&k3_clks 294 0>;
};
wiz2_refclk_dig: refclk-dig {
- clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_refclk_dig>;
assigned-clock-parents = <&k3_clks 294 11>;
@@ -608,7 +610,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
@@ -617,21 +619,21 @@
ranges = <0x5030000 0x0 0x5030000 0x10000>;
wiz3_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 295 9>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_pll0_refclk>;
assigned-clock-parents = <&k3_clks 295 9>;
};
wiz3_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 295 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_pll1_refclk>;
assigned-clock-parents = <&k3_clks 295 0>;
};
wiz3_refclk_dig: refclk-dig {
- clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_refclk_dig>;
assigned-clock-parents = <&k3_clks 295 9>;
--
2.17.1
Powered by blists - more mailing lists