linux-kernel - [PATCH] docs: gpio: intro: Improve HTML formatting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  1 Jan 2021 21:43:25 +0100
From:   Jonathan Neuschäfer <j.neuschaefer@....net>
To:     linux-doc@...r.kernel.org
Cc:     Jonathan Neuschäfer <j.neuschaefer@....net>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Jonathan Corbet <corbet@....net>, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH] docs: gpio: intro: Improve HTML formatting

Currently the HTML output for Documentation/driver-api/gpio/intro.rst
doesn't look right. The lines that start with LOW or HIGH are formatted
in bold, while the next line after each is not bold.

With this patch, the HTML looks better.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---
 Documentation/driver-api/gpio/intro.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst
index 74591489d0b55..94dd7185e76eb 100644
--- a/Documentation/driver-api/gpio/intro.rst
+++ b/Documentation/driver-api/gpio/intro.rst
@@ -106,11 +106,11 @@ don't. When you need open drain signaling but your hardware doesn't directly
 support it, there's a common idiom you can use to emulate it with any GPIO pin
 that can be used as either an input or an output:

- LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
-	the pullup.
+ **LOW**: ``gpiod_direction_output(gpio, 0)`` ... this drives the signal and
+ overrides the pullup.

- HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
-	(or some other device) controls the signal.
+ **HIGH**: ``gpiod_direction_input(gpio)`` ... this turns off the output, so
+ the pullup (or some other device) controls the signal.

 The same logic can be applied to emulate open source signaling, by driving the
 high signal and configuring the GPIO as input for low. This open drain/open
--
2.29.2