| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210811091115.03b36daa@coco.lan>
Date: Wed, 11 Aug 2021 09:11:15 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Rob Herring <robh@...nel.org>
Cc: Linuxarm <linuxarm@...wei.com>, mauro.chehab@...wei.com,
Binghui Wang <wangbinghui@...ilicon.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Jingoo Han <jingoohan1@...il.com>,
Xiaowei Song <songxiaowei@...ilicon.com>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
PCI <linux-pci@...r.kernel.org>, linux-phy@...ts.infradead.org
Subject: Re: [PATCH v3 0/4] DT schema changes for HiKey970 PCIe hardware to
work
Em Tue, 10 Aug 2021 11:52:34 -0600
Rob Herring <robh@...nel.org> escreveu:
> > > > > pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
> > > > > reg = <0x80 0 0 0 0>;
> > > >
> > > > s/0x80/0/
> > > >
> > > > > compatible = "pciclass,0604";
> > > > > device_type = "pci";
> > > > > #address-cells = <3>;
> > > > > #size-cells = <2>;
> > > > > ranges;
> > > > > bus-range = <0x01 0xff>;
> > > > > msi-parent = <&its_pcie>;
> > > > >
> > > > > pcie@0,0 { // Lane 0: upstream
> > > > > reg = <0x010000 0 0 0 0>;
> > > >
> > > > While technically correct having the bus# in the address, that doesn't
> > > > work for FDT since we don't know the bus assignment. So we should just
> > > > use 0.
> > >
> > > Using 0 causes DTB compilation to produce a warning, due to the
> > > bus-range.
>
> What's the warning? 'bus-range' should be optional.
With this DT schema (simplified to show only relevant bits):
pcie@...00000 {
bus-range = <0x00 0xff>;
pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
bus-range = <0x01 0xff>;
pcie@0,0 { // Lane 0: upstream
reg = <0x0000 0 0 0 0>;
pcie@1,0 { // Lane 4: M.2
reg = <0x0800 0 0 0 0>;
};
pcie@5,0 { // Lane 5: Mini PCIe
reg = <0x2800 0 0 0 0>;
};
pcie@7,0 { // Lane 6: Ethernet
reg = <0x3800 0 0 0 0>;
};
};
};
};
This is the compilation warning:
$ make dtbs
arch/arm64/boot/dts/hisilicon/hi3670.dtsi:735.5-29: Warning (pci_device_bus_num): /soc/pcie@...00000/pcie@0,0/pcie@0,0:bus-range: PCI bus number 0 out of range, expected (1 - 1)
This is solved by changing:
pcie@0,0 { // Lane 0: upstream
reg = <0x0000 0 0 0 0>;
to:
pcie@0,0 { // Lane 0: upstream
reg = <0x010000 0 0 0 0>;
>
> > > Without the bus-range, there will be runtime warnings,
> > > as this will be assigned as bus 1.
> >
> > Okay, that might be something we need to fix.
>
> Actually, I don't see how there's a problem. First, the only place we
> read 'bus-range' is of_pci_parse_bus_range() and that's only called
> for the host bridge. Any other occurrence of 'bus-range' should be
> ignored. The only place we read 'reg' is of_pci_get_devfn() and we
> mask just the devfn bits.
>
> > [ 4.992572] pci_bus 0000:00: root bus resource [bus 00-01]
>
> I don't see any way this can happen other than pcie@...00000 node
> containing 'bus-range = <0 1>;'. It comes from
> pci_host_bridge.windows.
Yeah, you're right. On the first versions, 'bus-range = <0 1>;' was used,
just like:
arch/arm64/boot/dts/hisilicon/hi3660.dtsi
(I have a fixup patch fixing the warning on Kirin 960 due to that)
Ok, I did another test here: if I drop both dma-range, it will output:
[ 3.778028] kirin-pcie f4000000.pcie: No bus range found for /soc/pcie@...00000, using [bus 00-ff]
But no conflict warnings. So, I guess dropping bus-range and the explicit
bus 1 setting at "reg" is a clean approach.
As a reference, this is the dmesg log here (with OF debug turned on):
# dmesg|grep -i pci
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-rc1+ root=UUID=646147e1-d186-44cc-b0d2-60c42f8dcc6d ro drm.debug=0x6 earlycon=pl011,0xfff32000,115200 console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd12 rootwait rw quiet efi=noruntime drm.debug=0x06 "dyndbg=file drivers/pci/of.c +p; drivers/gpu/* +p; file drivers/pci/of.c +p; drivers/spmi/* +p; file drivers/pci/of.c +p; drivers/mfd/* +p; file drivers/pci/of.c +p; drivers/regulator/* +p; file drivers/pci/of.c +p; drivers/usb/core/hub.c +p" no_console_suspend loglevel=9 kernel.panic=5
[ 0.000000] Unknown command line parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-rc1+ dyndbg=file drivers/pci/of.c +p; drivers/gpu/* +p; file drivers/pci/of.c +p; drivers/spmi/* +p; file drivers/pci/of.c +p; drivers/mfd/* +p; file drivers/pci/of.c +p; drivers/regulator/* +p; file drivers/pci/of.c +p; drivers/usb/core/hub.c +p
[ 0.725101] PCI: CLS 0 bytes, default 64
[ 1.520828] ehci-pci: EHCI PCI platform driver
[ 1.521022] ohci-pci: OHCI PCI platform driver
[ 2.204793] dyndbg=file drivers/pci/of.c +p; drivers/gpu/* +p; file drivers/pci/of.c +p; drivers/spmi/* +p; file drivers/pci/of.c +p; drivers/mfd/* +p; file drivers/pci/of.c +p; drivers/regulator/* +p; file drivers/pci/of.c +p; drivers/usb/core/hub.c +p
[ 3.767252] kirin-pcie f4000000.pcie: host bridge /soc/pcie@...00000 ranges:
[ 3.778028] kirin-pcie f4000000.pcie: No bus range found for /soc/pcie@...00000, using [bus 00-ff]
[ 3.792466] kirin-pcie f4000000.pcie: Parsing ranges property...
[ 3.801919] kirin-pcie f4000000.pcie: MEM 0x00f6000000..0x00f7ffffff -> 0x0000000000
[ 3.813680] kirin-pcie f4000000.pcie: invalid resource
[ 3.822189] kirin-pcie f4000000.pcie: iATU unroll: enabled
[ 3.831159] kirin-pcie f4000000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 3.943155] kirin-pcie f4000000.pcie: Link up
[ 3.956821] (null): pci_set_bus_of_node: of_node: /soc/pcie@...00000
[ 3.979143] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
[ 3.989441] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.998050] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
[ 4.011965] pci 0000:00:00.0: [19e5:3670] type 01 class 0x060400
[ 4.021177] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 4.031041] pci 0000:00:00.0: pci_set_of_node: of_node: /soc/pcie@...00000
[ 4.041362] pci 0000:00:00.0: supports D1 D2
[ 4.049191] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 4.059554] pci_bus 0000:01: pci_set_bus_of_node: of_node: /soc/pcie@...00000/pcie@0,0
[ 4.071133] pci 0000:01:00.0: [10b5:8606] type 01 class 0x060400
[ 4.080831] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf601ffff]
[ 4.103511] pci 0000:01:00.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0
[ 4.115403] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 4.139816] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.157297] pci_bus 0000:02: pci_set_bus_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.172380] pci 0000:02:01.0: [10b5:8606] type 01 class 0x060400
[ 4.182279] pci 0000:02:01.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.197047] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 4.207583] pci 0000:02:04.0: [10b5:8606] type 01 class 0x060400
[ 4.217659] pci 0000:02:04.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.234551] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 4.254284] pci 0000:02:05.0: [10b5:8606] type 01 class 0x060400
[ 4.267668] pci 0000:02:05.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.282530] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 4.295077] pci 0000:02:07.0: [10b5:8606] type 01 class 0x060400
[ 4.306032] pci 0000:02:07.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.320927] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 4.333414] pci 0000:02:09.0: [10b5:8606] type 01 class 0x060400
[ 4.340439] pci 0000:02:09.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0
[ 4.350084] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 4.358150] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.366379] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.374515] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.382682] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.390834] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.399079] pci_bus 0000:03: pci_set_bus_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0/pcie@1,0
[ 4.409309] pci 0000:03:00.0: [144d:a809] type 00 class 0x010802
[ 4.415564] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6003fff 64bit]
[ 4.422769] pci 0000:03:00.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0/pcie@1,0
[ 4.433782] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 4.449954] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 4.456836] pci_bus 0000:04: pci_set_bus_of_node: of_node: (null)
[ 4.457918] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 4.478895] pci_bus 0000:05: pci_set_bus_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0/pcie@5,0
[ 4.491772] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 4.503438] pci_bus 0000:06: pci_set_bus_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0/pcie@7,0
[ 4.529140] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 4.535374] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 4.541229] pci 0000:06:00.0: reg 0x18: [mem 0xf7000000-0xf7000fff 64bit]
[ 4.548194] pci 0000:06:00.0: reg 0x20: [mem 0xf7200000-0xf7203fff 64bit pref]
[ 4.561063] pci 0000:06:00.0: pci_set_of_node: of_node: /soc/pcie@...00000/pcie@0,0/pcie@0,0/pcie@7,0
[ 4.582075] pci 0000:06:00.0: supports D1 D2
[ 4.586357] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.594727] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 4.601538] pci_bus 0000:07: pci_set_bus_of_node: of_node: (null)
[ 4.608473] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 4.615124] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 07
[ 4.621810] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
[ 4.628606] pci 0000:00:00.0: BAR 14: assigned [mem 0xf7000000-0xf72fffff]
[ 4.628610] pci 0000:00:00.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff pref]
[ 4.642813] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000]
[ 4.649174] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000]
[ 4.661518] pci 0000:01:00.0: BAR 14: assigned [mem 0xf7000000-0xf71fffff]
[ 4.669074] pci 0000:01:00.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff 64bit pref]
[ 4.677066] pci 0000:01:00.0: BAR 0: assigned [mem 0xf7200000-0xf721ffff]
[ 4.683891] pci 0000:01:00.0: BAR 13: no space for [io size 0x1000]
[ 4.690252] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x1000]
[ 4.690266] pci 0000:02:01.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
[ 4.690270] pci 0000:02:07.0: BAR 14: assigned [mem 0xf7100000-0xf71fffff]
[ 4.710728] pci 0000:02:07.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff 64bit pref]
[ 4.727780] pci 0000:02:07.0: BAR 13: no space for [io size 0x1000]
[ 4.727783] pci 0000:02:07.0: BAR 13: failed to assign [io size 0x1000]
[ 4.727790] pci 0000:03:00.0: BAR 0: assigned [mem 0xf7000000-0xf7003fff 64bit]
[ 4.727904] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 4.753165] pci 0000:02:01.0: bridge window [mem 0xf7000000-0xf70fffff]
[ 4.769738] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 4.774843] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 4.779959] pci 0000:06:00.0: BAR 4: assigned [mem 0xf7300000-0xf7303fff 64bit pref]
[ 4.787839] pci 0000:06:00.0: BAR 2: assigned [mem 0xf7100000-0xf7100fff 64bit]
[ 4.795273] pci 0000:06:00.0: BAR 0: no space for [io size 0x0100]
[ 4.801543] pci 0000:06:00.0: BAR 0: failed to assign [io size 0x0100]
[ 4.808159] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 4.813166] pci 0000:02:07.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 4.819981] pci 0000:02:07.0: bridge window [mem 0xf7300000-0xf73fffff 64bit pref]
[ 4.827782] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 4.832871] pci 0000:01:00.0: PCI bridge to [bus 02-07]
[ 4.838138] pci 0000:01:00.0: bridge window [mem 0xf7000000-0xf71fffff]
[ 4.844952] pci 0000:01:00.0: bridge window [mem 0xf7300000-0xf73fffff 64bit pref]
[ 4.852751] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 4.857980] pci 0000:00:00.0: bridge window [mem 0xf7000000-0xf72fffff]
[ 4.864770] pci 0000:00:00.0: bridge window [mem 0xf7300000-0xf73fffff pref]
[ 4.881547] pcieport 0000:00:00.0: PME: Signaling with IRQ 58
[ 4.888905] pcieport 0000:00:00.0: AER: enabled with IRQ 58
[ 4.895013] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
[ 4.903260] pcieport 0000:02:01.0: enabling device (0000 -> 0002)
[ 4.914761] pcieport 0000:02:07.0: enabling device (0000 -> 0002)
[ 4.928984] nvme nvme0: pci function 0000:03:00.0
Thanks,
Mauro
Powered by blists - more mailing lists