lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Oct 2021 01:45:20 +0200 From: Andrew Lunn <andrew@...n.ch> To: Chris Packham <chris.packham@...iedtelesis.co.nz> Cc: gregory.clement@...tlin.com, sebastian.hesselbarth@...il.com, robh+dt@...nel.org, kostap@...vell.com, linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH 1/2] arm/arm64: dts: Enable 2.5G Ethernet port on CN9130-CRB On Fri, Oct 08, 2021 at 12:06:18PM +1300, Chris Packham wrote: > Enable the 2.5G Ethernet port by setting the status to "okay" and the > phy-mode to "2500base-x" on the cn9130-crb boards. Tested on a > CN9130-CRB-A. > > Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz> > --- > > The Marvell SDK adds 2500base-t and uses it in the equivalent dtsi but > looking at the documentation for both the SoC and the PHY I think > 2500base-x is correct for the system interface (the line side is > 2500base-t). 2500base-t does not make any sense. It does not even exist in mainline. Reviewed-by: Andrew Lunn <andrew@...n.ch> Andrew
Powered by blists - more mailing lists