lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 15 Oct 2021 10:33:38 +0200
From:   Nicolas Ferre <nicolas.ferre@...rochip.com>
To:     Claudiu Beznea <claudiu.beznea@...rochip.com>,
        <mturquette@...libre.com>, <sboyd@...nel.org>
CC:     <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <ludovic.desroches@...rochip.com>,
        <alexandre.belloni@...tlin.com>
Subject: Re: [PATCH v5 00/15] clk: at91: updates for power management and dvfs

Stephen,

On 11/10/2021 at 13:27, Claudiu Beznea wrote:
> Hi,
> 
> This series addresses the clock power management for SAMA7G5 and also
> updates the master clock driver and sam9x60-pll driver to accommodate
> the requests at [1] and avoid overclocking of CPU and MCK0 domains while
> changing the frequency via DVFS.

I've just added my Ack tags to the whole series. I think that it brings 
so much important additions to our new SoC as well as fixing some (non 
urgent) bugs.

In order to streamline the process of including this series to upstream, 
do you want me to send you a pull-request? against latest clk-at91 
branch in your tree?

Best regards,
   Nicolas

> The power management part is implemented by adding
> save_context()/restore_context() on each clock driver (patch 1/15). Since
> the PM part is necessary only for backup mode (supported on SAMA5D2 and
> SAMA7G5) the pmc.c has been adapted to call the
> save_context()/restore_context() only on switches to/from backup mode
> (patch 2/15).
> 
> Patch 3/15 adds the securam clock on SAMA7G5. This is necessary for
> backup mode of SAMA7G5.
> 
> Patch 4/15 adapt SAMA7G5 MCK1..4 driver to use the defines at
> include/linux/clk/at91_pmc.h introduced in commit ec03f18cc222
> ("clk: at91: add register definition for sama7g5's master clock").
> 
> Patch 5/15 improves a bit readability in some places of master clock
> driver.
> 
> Patch 6/15 enable the suspend/resume for clocks also for SAMA7G5.
> 
> Patches 7-10/15 adds fixes in master clock driver and sam9x60-pll driver.
> 
> Patches 11-12/15 address DVFS by adding notifiers for master clock driver
> and sam9x60-pll driver to avoid overclocking for CPU domain and MCK0
> domain.
> 
> Patch 13/15 removes the master clock prescaler from Linux clock tree
> as it has been discovered a hardware bug on it and it may not lock
> on some scenario although its output clock is stable.
> 
> Patch 14/15 decreases the low limit of MCK0 as it can go even to 32KHz.
> 
> Patch 15/15 uses clk_core_get_rate_recalc() in clk_rate_get().
> 
> Thank you,
> Claudiu Beznea
> 
> [1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/
> [2] https://lore.kernel.org/lkml/163047507296.42057.10597374695758699868@swboyd.mtv.corp.google.com/
> 
> Changes in v5:
> - dropped patches 16/17, 17/17 from previous version
> - in patch 02/15:
> 	- use read_relaxed() to get the value at address pointed by
> 	  at91_pmc_backup_suspend
> 	- removed of_find_device_by_node() from pmc_register_ops() since its
> 	  returned value was not used in the function (of_device_is_available()
> 	  is enough to know before mapping securam). of_find_device_by_node()
> 	  was the one which needed the changes of postcore_initcall() with
> 	  subsys_initcall() (as described in commit description from v4) thus
> 	  kept the postcore_initcall(); also updated the commit description
> 	  to reflect this.
> 
> Changes in v4:
> - removed opp dependencies along with get_cpu_device() in patch 11/17 as
>    those functionalities are not available at the initialization time for
>    clocks instantiated with CLK_OF_DECLARE
> 
> Changes in v3:
> - minor fixes in patch 1/7 (e.g. use regmap_read() + checks + update +
>    regmap_write() sequence instead of regmap_read() + checks +
>    regmap_update_bits()
> - patch 4/17 has been updated after commit ec03f18cc222
>    ("clk: at91: add register definition for sama7g5's master clock")
> - patch 6-10/17, 14-17/17 are newly introduced
> - notifier for sam9x60 div pll was introduced (patch 11/17) and
>    notifier logic for master clock div has been changed (patch 12/17)
>    to use safe divider on PRE_RATE_CHANGE events and update clock to highest
>    possible rate on POST_RATE_CHANGE events
> - master clock prescaler has been removed from Linux clock tree for
>    SAMA7G5
> 
> Changes in v2:
> - addressed code review comments
> - collected tags
> 
> Claudiu Beznea (15):
>    clk: at91: re-factor clocks suspend/resume
>    clk: at91: pmc: execute suspend/resume only for backup mode
>    clk: at91: sama7g5: add securam's peripheral clock
>    clk: at91: clk-master: add register definition for sama7g5's master
>      clock
>    clk: at91: clk-master: improve readability by using local variables
>    clk: at91: pmc: add sama7g5 to the list of available pmcs
>    clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
>    clk: at91: clk-master: check if div or pres is zero
>    clk: at91: clk-master: mask mckr against layout->mask
>    clk: at91: clk-master: fix prescaler logic
>    clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
>    clk: at91: clk-master: add notifier for divider
>    clk: at91: sama7g5: remove prescaler part of master clock
>    clk: at91: sama7g5: set low limit for mck0 at 32KHz
>    clk: use clk_core_get_rate_recalc() in clk_rate_get()
> 
>   drivers/clk/at91/at91rm9200.c       |   2 +-
>   drivers/clk/at91/at91sam9260.c      |   2 +-
>   drivers/clk/at91/at91sam9g45.c      |   2 +-
>   drivers/clk/at91/at91sam9n12.c      |   2 +-
>   drivers/clk/at91/at91sam9rl.c       |   2 +-
>   drivers/clk/at91/at91sam9x5.c       |   2 +-
>   drivers/clk/at91/clk-generated.c    |  46 ++-
>   drivers/clk/at91/clk-main.c         |  66 ++++
>   drivers/clk/at91/clk-master.c       | 463 ++++++++++++++++++++++------
>   drivers/clk/at91/clk-peripheral.c   |  40 ++-
>   drivers/clk/at91/clk-pll.c          |  39 +++
>   drivers/clk/at91/clk-programmable.c |  29 +-
>   drivers/clk/at91/clk-sam9x60-pll.c  | 174 +++++++++--
>   drivers/clk/at91/clk-system.c       |  20 ++
>   drivers/clk/at91/clk-usb.c          |  27 ++
>   drivers/clk/at91/clk-utmi.c         |  39 +++
>   drivers/clk/at91/dt-compat.c        |   2 +-
>   drivers/clk/at91/pmc.c              | 173 +++--------
>   drivers/clk/at91/pmc.h              |  29 +-
>   drivers/clk/at91/sam9x60.c          |   6 +-
>   drivers/clk/at91/sama5d2.c          |   2 +-
>   drivers/clk/at91/sama5d3.c          |   2 +-
>   drivers/clk/at91/sama5d4.c          |   2 +-
>   drivers/clk/at91/sama7g5.c          |  29 +-
>   drivers/clk/clk.c                   |   2 +-
>   25 files changed, 890 insertions(+), 312 deletions(-)
> 


-- 
Nicolas Ferre

Powered by blists - more mailing lists