linux-kernel - Re: [PATCH v2 2/5] MIPS: ralink: implement 'pcibios_root_bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 2 Dec 2021 09:29:02 +0100
From:   Sergio Paracuellos <sergio.paracuellos@...il.com>
To:     Guenter Roeck <linux@...ck-us.net>
Cc:     linux-pci <linux-pci@...r.kernel.org>,
        "open list:MIPS" <linux-mips@...r.kernel.org>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Arnd Bergmann <arnd@...db.de>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/5] MIPS: ralink: implement 'pcibios_root_bridge_prepare()'

Hi Guenter,

On Wed, Dec 1, 2021 at 11:17 PM Guenter Roeck <linux@...ck-us.net> wrote:
>
> On 12/1/21 1:51 PM, Sergio Paracuellos wrote:
> > PCI core code call 'pcibios_root_bridge_prepare()' function inside function
> > 'pci_register_host_bridge()'. This point is very good way to properly enter
> > into this MIPS ralink specific code to properly setup I/O coherency units
> > with PCI memory addresses.
> >
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
> > ---
> >   arch/mips/ralink/mt7621.c | 30 ++++++++++++++++++++++++++++++
> >   1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
> > index bd71f5b14238..7649416c1cd7 100644
> > --- a/arch/mips/ralink/mt7621.c
> > +++ b/arch/mips/ralink/mt7621.c
> > @@ -10,6 +10,7 @@
> >   #include <linux/slab.h>
> >   #include <linux/sys_soc.h>
> >   #include <linux/memblock.h>
> > +#include <linux/pci.h>
> >
> >   #include <asm/bootinfo.h>
> >   #include <asm/mipsregs.h>
> > @@ -22,6 +23,35 @@
> >
> >   static void *detect_magic __initdata = detect_memory_region;
> >
> > +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > +{
> > +     struct resource_entry *entry;
> > +     resource_size_t mask;
> > +
> > +     entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
> > +     if (!entry) {
> > +             pr_err("Cannot get memory resource\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     if (mips_cps_numiocu(0)) {
> > +             /*
> > +              * FIXME: hardware doesn't accept mask values with 1s after
> > +              * 0s (e.g. 0xffef), so it would be great to warn if that's
> > +              * about to happen
> > +              */ > +         mask = ~(entry->res->end - entry->res->start);
> > +
>
> Try something like this:
>                 WARN_ON((mask != ~0UL && BIT(ffz(mask)) - 1 != mask);

Thanks for the tip. The following works for me:

                  WARN_ON(mask != ~0UL && ~(BIT(__ffs(mask)) - 1) != mask);

I will send this as a different patch, though.

Best regards,
    Sergio Paracuellos

>
> > +             write_gcr_reg1_base(entry->res->start);
> > +             write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
> > +             pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
> > +                     (unsigned long long)read_gcr_reg1_base(),
> > +                     (unsigned long long)read_gcr_reg1_mask());
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >   phys_addr_t mips_cpc_default_phys_base(void)
> >   {
> >       panic("Cannot detect cpc address");
> >
>