lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2e375860-83d6-c5bb-3ab4-1b02e672c2e5@siemens.com>
Date:   Thu, 3 Feb 2022 18:28:10 +0100
From:   Jan Kiszka <jan.kiszka@...mens.com>
To:     Matthias Schiffer <matthias.schiffer@...tq-group.com>,
        Nishanth Menon <nm@...com>,
        Kishon Vijay Abraham I <kishon@...com>
CC:     Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-am65: disable optional peripherals
 by default

On 03.02.22 14:06, Matthias Schiffer wrote:
> On Thu, 2022-02-03 at 12:39 +0100, Jan Kiszka wrote:
>> On 02.02.22 21:32, Nishanth Menon wrote:
>>> On 12:25-20220111, Matthias Schiffer wrote:
>>>> All peripharals that require pinmuxing or other configuration to
>>>> work
>>>> should be disabled by default. Dependent DTS are adjusted
>>>> accordingly.
>>>>
>>>> The following nodes are now "disabled" according to dtx_diff and
>>>> were not
>>>> overridden to "okay", as they define no pinctrl:
>>>>
>>>> k3-am654-base-board:
>>>> - mcu_i2c0
>>>> - mcu_spi0..2
>>>> - cal
>>>> - main_i2c3
>>>> - ehrpwm0..5
>>>> - main_uart1..2
>>>> - main_spi1..4
>>>>
>>>> k3-am65-iot2050*:
>>>> - mci_spi1..2
>>>> - cal
>>>> - ehrpwm0..5
>>>> - main_spi0..4
>>>>
>>>> Signed-off-by: Matthias Schiffer <
>>>> matthias.schiffer@...tq-group.com>
>>>
>>> Jan: you ok with this series? Please ack.
>>>
>>
>> Just rebased the still-too-long backlog to our system fully working
>> over 
>> mainline.
> 
> Thanks for testing. As noted earlier, I will send a v2 of this patch
> that fixes one more inconsistency.
> 
>> Basically looks good, but this might be a regression of the 
>> patch:
>>
>> [    1.810083] OF: /bus@...000/pcie@...0000: phandle pcie-mode@...0
>> needs 1, found 0
>> ...
>> [    1.854840] OF: /bus@...000/pcie@...0000: phandle pcie-devid@210
>> needs 1, found 0
>>
>> Jan
>>
> 
> That seems to be an older issue, rather than a regression of this
> patch:
> 
> k3-am65-main.dtsi defines:
> 
>     ti,syscon-pcie-id = <&pcie_devid>;
>     ti,syscon-pcie-mode = <&pcie0_mode>
> 
> While according the driver binding docs something like the following is
> expected:
> 
>     ti,syscon-pcie-id = <&scm_conf 0x0210>;
>     ti,syscon-pcie-mode = <&scm_conf 0x4060>;
> 
> I assume that the k3-am65-main.dtsi section was imported from ti-linux
> without accounting for the mainline driver's different binding.
> 

Yep, 7dcf07ac88676a365ce3245b44af2be432f21120 caused it, and this seems 
to be the fix (though I cannot find a negative impact yet, except for 
the warning):

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 09cfdc72c64b..be79c0bc1776 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -694,8 +694,8 @@ pcie0_rc: pcie@...0000 {
 		#size-cells = <2>;
 		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000>,
 			 <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
-		ti,syscon-pcie-id = <&pcie_devid>;
-		ti,syscon-pcie-mode = <&pcie0_mode>;
+		ti,syscon-pcie-id = <&scm_conf 0x0210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
 		bus-range = <0x0 0xff>;
 		num-viewport = <16>;
 		max-link-speed = <2>;
@@ -723,7 +723,7 @@ pcie0_ep: pcie-ep@...0000 {
 		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
 		reg-names = "app", "dbics", "addr_space", "atu";
 		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-		ti,syscon-pcie-mode = <&pcie0_mode>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;
 		max-link-speed = <2>;
@@ -740,8 +740,8 @@ pcie1_rc: pcie@...0000 {
 		#size-cells = <2>;
 		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000>,
 			 <0x82000000 0 0x18030000 0x0   0x18030000 0 0x07FD0000>;
-		ti,syscon-pcie-id = <&pcie_devid>;
-		ti,syscon-pcie-mode = <&pcie1_mode>;
+		ti,syscon-pcie-id = <&scm_conf 0x0210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
 		bus-range = <0x0 0xff>;
 		num-viewport = <16>;
 		max-link-speed = <2>;
@@ -769,7 +769,7 @@ pcie1_ep: pcie-ep@...0000 {
 		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
 		reg-names = "app", "dbics", "addr_space", "atu";
 		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
-		ti,syscon-pcie-mode = <&pcie1_mode>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;
 		max-link-speed = <2>;

Jan

-- 
Siemens AG, Technology
Competence Center Embedded Linux

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ