[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <d714ec21-b6e8-1753-1d1f-3b51bae68f35@kernel.org>
Date: Wed, 2 Mar 2022 10:37:38 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Potin Lai <potin.lai@...ntatw.com>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>
Cc: Patrick Williams <patrick@...cx.xyz>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 2/2] dt-bindings: hwmon: Add sample averaging
properties for ADM1275
On 02/03/2022 08:08, Potin Lai wrote:
> Add documentation of new properties for sample averaging in PMON_CONFIG
> register.
>
> New properties:
> - adi,volt-curr-sample-average
> - adi,power-sample-average
>
> Signed-off-by: Potin Lai <potin.lai@...ntatw.com>
> ---
> .../bindings/hwmon/adi,adm1275.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> index 223393d7cafd..b191abddf20b 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> @@ -37,6 +37,72 @@ properties:
> description:
> Shunt resistor value in micro-Ohm.
>
> + adi,volt-curr-sample-average:
> + description: |
> + Number of samples to be used to report voltage and current values.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8, 16, 32, 64, 128]
> +
> + adi,power-sample-average:
> + description: |
> + Number of samples to be used to report power values.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8, 16, 32, 64, 128]
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - adi,adm1075
> + - adi,adm1276
> + then:
> + properties:
> + adi,volt-curr-sample-average:
> + default: 128
> + adi,power-sample-average-enable: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - adi,adm1275
> + then:
> + properties:
> + adi,volt-curr-sample-average:
> + default: 16
> + adi,power-sample-average-enable: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - adi,adm1272
> + then:
> + properties:
> + adi,volt-curr-sample-average:
> + default: 128
> + adi,power-sample-average-enable:
> + default: 128
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - adi,adm1278
> + - adi,adm1293
> + - adi,adm1294
> + then:
> + properties:
> + adi,volt-curr-sample-average:
> + default: 128
> + adi,power-sample-average-enable:
This should be adi,power-sample-average?
> + default: 1
> +
> required:
> - compatible
> - reg
> @@ -53,5 +119,8 @@ examples:
> compatible = "adi,adm1272";
> reg = <0x10>;
> shunt-resistor-micro-ohms = <500>;
> + adi,volt-curr-sample-average = <128>;
> + adi,power-sample-average = <128>;
> + adi,power-sample-average-enable;
This property does not exist. Did you run dt_binding_check?
> };
> };
Best regards,
Krzysztof
Powered by blists - more mailing lists