Message-ID: <20220527023157.GD7927@hu-pkondeti-hyd.qualcomm.com>
Date:   Fri, 27 May 2022 08:01:57 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Harsh Agarwal <quic_harshq@...cinc.com>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Felipe Balbi <balbi@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_pkondeti@...cinc.com>, <quic_ppratap@...cinc.com>
Subject: Re: [RFC v2 2/2] usb: dwc3: Refactor PHY logic to support Multiport
 Controller

Hi Harsh,

On Thu, May 26, 2022 at 03:43:49PM +0530, Harsh Agarwal wrote:
> Currently the USB driver supports only single port controller
> which works with 2 PHYs at max ie HS and SS.
> 
> But some devices have "multiport" controller where a single
> controller supports multiple ports and each port have their own
> PHYs. Refactor PHY logic to support the same.
> 
> This implementation is compatible with existing glue drivers.
> 
> Signed-off-by: Harsh Agarwal <quic_harshq@...cinc.com>
> ---
>  drivers/usb/dwc3/core.c   | 420 +++++++++++++++++++++++++++++++++-------------
>  drivers/usb/dwc3/core.h   |  12 +-
>  drivers/usb/dwc3/drd.c    |  16 +-
>  drivers/usb/dwc3/gadget.c |   4 +-
>  4 files changed, 326 insertions(+), 126 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 2682469..def08ac 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -120,7 +120,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>  {
>  	struct dwc3 *dwc = work_to_dwc(work);
>  	unsigned long flags;
> -	int ret;
> +	int i, ret;
>  	u32 reg;
>  
>  	mutex_lock(&dwc->mutex);
> @@ -189,10 +189,13 @@ static void __dwc3_set_mode(struct work_struct *work)
>  		if (ret) {
>  			dev_err(dwc->dev, "failed to initialize host\n");
>  		} else {
> -			if (dwc->usb2_phy)
> -				otg_set_vbus(dwc->usb2_phy->otg, true);
> -			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> -			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> +			for (i = 0; i < dwc->num_hsphy; i++) {
> +				if (dwc->usb2_phy[i])
> +					otg_set_vbus(dwc->usb2_phy[i]->otg, true);
> +				phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> +			}
> +			for (i = 0; i < dwc->num_ssphy; i++)
> +				phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>  			if (dwc->dis_split_quirk) {
>  				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
>  				reg |= DWC3_GUCTL3_SPLITDISABLE;
> @@ -205,10 +208,10 @@ static void __dwc3_set_mode(struct work_struct *work)
>  
>  		dwc3_event_buffers_setup(dwc);
>  
> -		if (dwc->usb2_phy)
> -			otg_set_vbus(dwc->usb2_phy->otg, false);
> -		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> -		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
> +		if (dwc->usb2_phy[0])
> +			otg_set_vbus(dwc->usb2_phy[0]->otg, false);
> +		phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
> +		phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>  
>  		ret = dwc3_gadget_init(dwc);
>  		if (ret)
> @@ -655,12 +658,18 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
>   */
>  static int dwc3_phy_setup(struct dwc3 *dwc)
>  {
> +	int i;
>  	unsigned int hw_mode;
>  	u32 reg;
>  
>  	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>  
>  	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> +	for (i = 1; i < dwc->num_ssphy; i++) {
> +		if (reg != dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)))
> +			dev_warn(dwc->dev,
> +				"Reset values of pipectl registers 0 and %d are different!\n", i);
> +	}

Can you please elaborate on this? What is the purpose of checking POR reset
values of other ports against first port? If this is some debug code, please
remove it.

>  
>  	/*
>  	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
> @@ -715,9 +724,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  	if (dwc->dis_del_phy_power_chg_quirk)
>  		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>  
> -	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +	for (i = 0; i < dwc->num_ssphy; i++)
> +		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
>  
>  	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> +	for (i = 1; i < dwc->num_hsphy; i++) {
> +		if (reg != dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)))
> +			dev_warn(dwc->dev,
> +				"Reset values of usb2phycfg register 0 and %d are different!\n", i);
> +	}

ditto

>  
>  	/* Select the HS PHY interface */
>  	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
> @@ -729,7 +744,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  		} else if (dwc->hsphy_interface &&
>  				!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
>  			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
> -			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			for (i = 0; i < dwc->num_hsphy; i++)
> +				dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>  		} else {
>  			/* Relying on default value. */
>  			if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
> @@ -786,7 +802,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  	if (dwc->dis_u2_freeclk_exists_quirk)
>  		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
>  
> -	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +	for (i = 0; i < dwc->num_hsphy; i++)
> +		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>  
>  	return 0;
>  }
> @@ -825,17 +842,29 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
>  
>  static void dwc3_core_exit(struct dwc3 *dwc)
>  {
> +	int i;
>  	dwc3_event_buffers_cleanup(dwc);
>  
> -	usb_phy_shutdown(dwc->usb2_phy);
> -	usb_phy_shutdown(dwc->usb3_phy);
> -	phy_exit(dwc->usb2_generic_phy);
> -	phy_exit(dwc->usb3_generic_phy);
> +	for (i = 0; i < dwc->num_hsphy; i++) {
> +		usb_phy_shutdown(dwc->usb2_phy[i]);
> +		phy_exit(dwc->usb2_generic_phy[i]);
> +	}
> +
> +	for (i = 0; i < dwc->num_ssphy; i++) {
> +		usb_phy_shutdown(dwc->usb3_phy[i]);
> +		phy_exit(dwc->usb3_generic_phy[i]);
> +	}
> +
> +	for (i = 0; i < dwc->num_hsphy; i++) {
> +		usb_phy_set_suspend(dwc->usb2_phy[i], 1);
> +		phy_power_off(dwc->usb2_generic_phy[i]);
> +	}

can you club this block with the first for loop around num_hsphy?

> +
> +	for (i = 0; i < dwc->num_ssphy; i++) {
> +		usb_phy_set_suspend(dwc->usb3_phy[i], 1);
> +		phy_power_off(dwc->usb3_generic_phy[i]);
> +	}

can you club this block with the first for loop around num_ssphy?
>  
> -	usb_phy_set_suspend(dwc->usb2_phy, 1);
> -	usb_phy_set_suspend(dwc->usb3_phy, 1);
> -	phy_power_off(dwc->usb2_generic_phy);
> -	phy_power_off(dwc->usb3_generic_phy);
>  	dwc3_clk_disable(dwc);
>  	reset_control_assert(dwc->reset);
>  }
> @@ -1038,7 +1067,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  {
>  	unsigned int		hw_mode;
>  	u32			reg;
> -	int			ret;
> +	int			ret, i;
>  
>  	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>  
> @@ -1066,16 +1095,24 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  		dwc->phys_ready = true;
>  	}
>  
> -	usb_phy_init(dwc->usb2_phy);
> -	usb_phy_init(dwc->usb3_phy);
> -	ret = phy_init(dwc->usb2_generic_phy);
> -	if (ret < 0)
> -		goto err0a;
> +	for (i = 0; i < dwc->num_hsphy; i++)
> +		usb_phy_init(dwc->usb2_phy[i]);
> +	for (i = 0; i < dwc->num_ssphy; i++)
> +		usb_phy_init(dwc->usb3_phy[i]);
>  
> -	ret = phy_init(dwc->usb3_generic_phy);
> -	if (ret < 0) {
> -		phy_exit(dwc->usb2_generic_phy);
> -		goto err0a;
> +	for (i = 0; i < dwc->num_hsphy; i++) {
> +		ret = phy_init(dwc->usb2_generic_phy[i]);
> +		if (ret < 0)
> +			goto err0a;
> +	}
> +
> +	for (i = 0; i < dwc->num_ssphy; i++) {
> +		ret = phy_init(dwc->usb3_generic_phy[i]);
> +		if (ret < 0) {
> +			for (i = 0; i < dwc->num_hsphy; i++)
> +				phy_exit(dwc->usb2_generic_phy[i]);
> +			goto err0a;
> +		}
>  	}
>  
>  	ret = dwc3_core_soft_reset(dwc);
> @@ -1085,15 +1122,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
>  	    !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
>  		if (!dwc->dis_u3_susphy_quirk) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> -			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> -			dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +			for (i = 0; i < dwc->num_ssphy; i++) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
> +				reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> +				dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
> +			}
>  		}
>  
>  		if (!dwc->dis_u2_susphy_quirk) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> -			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> -			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			for (i = 0; i < dwc->num_hsphy; i++) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> +				reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> +				dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> +			}
>  		}
>  	}
>  
> @@ -1112,15 +1153,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  
>  	dwc3_set_incr_burst_type(dwc);
>  
> -	usb_phy_set_suspend(dwc->usb2_phy, 0);
> -	usb_phy_set_suspend(dwc->usb3_phy, 0);
> -	ret = phy_power_on(dwc->usb2_generic_phy);
> -	if (ret < 0)
> -		goto err2;
> +	for (i = 0; i < dwc->num_hsphy; i++) {
> +		usb_phy_set_suspend(dwc->usb2_phy[i], 0);
> +		ret = phy_power_on(dwc->usb2_generic_phy[i]);
> +		if (ret < 0)
> +			goto err2;
> +	}
>  
> -	ret = phy_power_on(dwc->usb3_generic_phy);
> -	if (ret < 0)
> -		goto err3;
> +	for (i = 0; i < dwc->num_ssphy; i++) {
> +		usb_phy_set_suspend(dwc->usb3_phy[i], 0);
> +		ret = phy_power_on(dwc->usb3_generic_phy[i]);
> +		if (ret < 0)
> +			goto err3;
> +	}
>  
>  	ret = dwc3_event_buffers_setup(dwc);
>  	if (ret) {
> @@ -1228,20 +1273,29 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	return 0;
>  
>  err4:
> -	phy_power_off(dwc->usb3_generic_phy);
> +	for (i = 0; i < dwc->num_ssphy; i++)
> +		phy_power_off(dwc->usb3_generic_phy[i]);
>  
>  err3:
> -	phy_power_off(dwc->usb2_generic_phy);
> +	for (i = 0; i < dwc->num_hsphy; i++)
> +		phy_power_off(dwc->usb2_generic_phy[i]);
>  
>  err2:
> -	usb_phy_set_suspend(dwc->usb2_phy, 1);
> -	usb_phy_set_suspend(dwc->usb3_phy, 1);
> +	for (i = 0; i < dwc->num_hsphy; i++)
> +		usb_phy_set_suspend(dwc->usb2_phy[i], 1);
> +	for (i = 0; i < dwc->num_ssphy; i++)
> +		usb_phy_set_suspend(dwc->usb3_phy[i], 1);
>  
>  err1:
> -	usb_phy_shutdown(dwc->usb2_phy);
> -	usb_phy_shutdown(dwc->usb3_phy);
> -	phy_exit(dwc->usb2_generic_phy);
> -	phy_exit(dwc->usb3_generic_phy);
> +	for (i = 0; i < dwc->num_hsphy; i++) {
> +		usb_phy_shutdown(dwc->usb2_phy[i]);
> +		phy_exit(dwc->usb2_generic_phy[i]);
> +	}
> +
> +	for (i = 0; i < dwc->num_ssphy; i++) {
> +		usb_phy_shutdown(dwc->usb3_phy[i]);
> +		phy_exit(dwc->usb3_generic_phy[i]);
> +	}
>  
>  err0a:
>  	dwc3_ulpi_exit(dwc);
> @@ -1250,53 +1304,173 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> -static int dwc3_core_get_phy(struct dwc3 *dwc)
> +static struct usb_phy *dwc3_core_get_phy_by_handle_with_node(struct device *dev,
> +	const char *phandle, u8 index, struct device_node *lookup_node)
> +{
> +	struct device_node *node;
> +	struct usb_phy	*phy;
> +
> +	node = of_parse_phandle(lookup_node, phandle, index);
> +	if (!node) {
> +		dev_err(dev, "failed to get %s phandle in %pOF node\n", phandle,
> +			dev->of_node);
> +		return ERR_PTR(-ENODEV);
> +	}
> +	phy = devm_usb_get_phy_by_node(dev, node, NULL);
> +	of_node_put(node);
> +	return phy;
> +}

Can you call it devm_of_usb_get_phy_by_phandle() and add it to USB PHY library
(include/linux/usb/phy.h and drivers/usb/phy/phy.c). A separate patch
ofcourse.

> +
> +static int dwc3_count_phys(struct dwc3 *dwc, struct device_node *lookup_node)
> +{
> +	int count;
> +
> +	count = of_count_phandle_with_args(lookup_node, "phys", NULL);
> +
> +	if (count == -ENOENT)
> +		count = of_count_phandle_with_args(lookup_node, "usb-phy", NULL);
> +
> +	if (count == 1) {
> +		dwc->num_hsphy++;
> +	} else if (count == 2) {
> +		dwc->num_hsphy++;
> +		dwc->num_ssphy++;
> +	} else {
> +		return count;
> +	}
> +	return 0;
> +}
> +
> +static int dwc3_extract_num_phys(struct dwc3 *dwc)
> +{
> +	struct device_node	*ports, *port;
> +	int			ret;
> +
> +	/* Find if any "multiport" child is present inside DWC3*/
> +	for_each_available_child_of_node(dwc->dev->of_node, ports) {
> +		if (!strcmp(ports->name, "multiports"))
> +			break;
> +	}
> +	if (!ports) {
> +		dwc->num_hsphy = 1;
> +		dwc->num_ssphy = 1;
> +	} else {
> +		for_each_available_child_of_node(ports, port) {
> +			ret  = dwc3_count_phys(dwc, port);
> +			if (ret)
> +				return ret;
> +		}
> +	}
> +	dev_info(dwc->dev, "Num of HS and SS PHY are %u %u\n", dwc->num_hsphy, dwc->num_ssphy);
> +
> +	dwc->usb2_phy = devm_kzalloc(dwc->dev,
> +		sizeof(*dwc->usb2_phy) * dwc->num_hsphy, GFP_KERNEL);
> +	if (!dwc->usb2_phy)
> +		return -ENOMEM;
> +
> +	dwc->usb3_phy = devm_kzalloc(dwc->dev,
> +		sizeof(*dwc->usb3_phy) * dwc->num_ssphy, GFP_KERNEL);
> +	if (!dwc->usb3_phy)
> +		return -ENOMEM;
> +
> +	dwc->usb2_generic_phy = devm_kzalloc(dwc->dev,
> +		sizeof(*dwc->usb2_generic_phy) * dwc->num_hsphy, GFP_KERNEL);
> +	if (!dwc->usb2_generic_phy)
> +		return -ENOMEM;
> +
> +	dwc->usb3_generic_phy = devm_kzalloc(dwc->dev,
> +		sizeof(*dwc->usb3_generic_phy) * dwc->num_ssphy, GFP_KERNEL);
> +	if (!dwc->usb3_generic_phy)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +

The parsing scheme looks good to me.

> +static int dwc3_core_get_phy_by_node(struct dwc3 *dwc,
> +		struct device_node *lookup_node, int i)
>  {
>  	struct device		*dev = dwc->dev;
> -	struct device_node	*node = dev->of_node;
> -	int ret;
> +	int			ret;
>  
> -	if (node) {
> -		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> -		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
> +	if (lookup_node) {
> +		dwc->usb2_phy[i] = dwc3_core_get_phy_by_handle_with_node(dev,
> +								"usb-phy", 0, lookup_node);
> +		dwc->usb3_phy[i] = dwc3_core_get_phy_by_handle_with_node(dev,
> +								"usb-phy", 1, lookup_node);
>  	} else {
> -		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> -		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> +		dwc->usb2_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> +		dwc->usb3_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>  	}
>  
> -	if (IS_ERR(dwc->usb2_phy)) {
> -		ret = PTR_ERR(dwc->usb2_phy);
> +	if (IS_ERR(dwc->usb2_phy[i])) {
> +		ret = PTR_ERR(dwc->usb2_phy[i]);
>  		if (ret == -ENXIO || ret == -ENODEV)
> -			dwc->usb2_phy = NULL;
> +			dwc->usb2_phy[i] = NULL;
>  		else
>  			return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>  	}
>  
> -	if (IS_ERR(dwc->usb3_phy)) {
> -		ret = PTR_ERR(dwc->usb3_phy);
> +	if (IS_ERR(dwc->usb3_phy[i])) {
> +		ret = PTR_ERR(dwc->usb3_phy[i]);
>  		if (ret == -ENXIO || ret == -ENODEV)
> -			dwc->usb3_phy = NULL;
> +			dwc->usb3_phy[i] = NULL;
>  		else
>  			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>  	}
>  
> -	dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> -	if (IS_ERR(dwc->usb2_generic_phy)) {
> -		ret = PTR_ERR(dwc->usb2_generic_phy);
> -		if (ret == -ENOSYS || ret == -ENODEV)
> -			dwc->usb2_generic_phy = NULL;
> +	dwc->usb2_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb2-phy");
> +	if (IS_ERR(dwc->usb2_generic_phy[i])) {
> +		ret = PTR_ERR(dwc->usb2_generic_phy[i]);
> +		if (ret == -ENODEV)
> +			dwc->usb2_generic_phy[i] = NULL;
>  		else
>  			return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>  	}
>  
> -	dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> -	if (IS_ERR(dwc->usb3_generic_phy)) {
> -		ret = PTR_ERR(dwc->usb3_generic_phy);
> -		if (ret == -ENOSYS || ret == -ENODEV)
> -			dwc->usb3_generic_phy = NULL;
> +	dwc->usb3_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb3-phy");
> +	if (IS_ERR(dwc->usb3_generic_phy[i])) {
> +		ret = PTR_ERR(dwc->usb3_generic_phy[i]);
> +		if (ret == -ENODEV)
> +			dwc->usb3_generic_phy[i] = NULL;
>  		else
>  			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>  	}
> +	return 0;
> +}
> +
> +static int dwc3_core_get_phy(struct dwc3 *dwc)
> +{
> +	struct device		*dev = dwc->dev;
> +	struct device_node	*node = dev->of_node;
> +	struct device_node	*ports, *port;
> +
> +	int ret, i = 0;
nit: remove the above empty line.

> +
> +	ret = dwc3_extract_num_phys(dwc);
> +	if (ret) {
> +		dev_err(dwc->dev, "Unable to extract number of PHYs\n");
> +		return ret;
> +	}
> +
> +	/* Find if any "multiport" child is present inside DWC3*/
> +	for_each_available_child_of_node(node, ports) {
> +		if (!strcmp(ports->name, "multiport"))
> +			break;
> +	}
> +
> +	if (!ports) {
> +		ret = dwc3_core_get_phy_by_node(dwc, node, 0);
> +		if (ret)
> +			return ret;
> +	} else {
> +		for_each_available_child_of_node(ports, port) {
> +			ret = dwc3_core_get_phy_by_node(dwc, port, i);
> +			if (ret)
> +				return ret;
> +			i++;
> +		}
> +	}
> +	pr_info("USB phy all good\n");

Remove this debug code. or make it dev_dbg with information.

Thanks,
Pavan

Powered by blists - more mailing lists