[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJF2gTRm656yG0qaksQ47oozKhiJ6aSCgy1u721+59Wu8Sb=Ng@mail.gmail.com>
Date: Fri, 1 Jul 2022 07:43:43 +0800
From: Guo Ren <guoren@...nel.org>
To: Samuel Holland <samuel@...lland.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Prabhakar <prabhakar.csengg@...il.com>,
Marc Zyngier <maz@...nel.org>,
Sagar Kadam <sagar.kadam@...ive.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Thomas Gleixner <tglx@...utronix.de>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-renesas-soc@...r.kernel.org,
Biju Das <biju.das.jz@...renesas.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-riscv <linux-riscv@...ts.infradead.org>
Subject: Re: [PATCH v3 4/4] irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
Reviewed-by: Guo Ren <guoren@...nel.org>
On Thu, Jun 30, 2022 at 6:02 PM Samuel Holland <samuel@...lland.org> wrote:
>
> The T-HEAD PLIC ignores additional edges seen while an edge-triggered
> interrupt is being handled. Because of this behavior, the driver needs
> to complete edge-triggered interrupts in the .irq_ack callback before
> handling them, instead of in the .irq_eoi callback afterward. Otherwise,
> it could miss some interrupts.
>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> Signed-off-by: Samuel Holland <samuel@...lland.org>
> ---
>
> Changes in v3:
> - Rebased on top of the RZ/Five patches
>
> drivers/irqchip/irq-sifive-plic.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
> index 90e44367bee9..b3a36dca7f1b 100644
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -474,7 +474,6 @@ static int __init plic_init(struct device_node *node,
>
> IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
> IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
> -IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
>
> static int __init plic_edge_init(struct device_node *node,
> struct device_node *parent)
> @@ -483,3 +482,4 @@ static int __init plic_edge_init(struct device_node *node,
> }
>
> IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_edge_init);
> +IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
> --
> 2.35.1
>
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
Powered by blists - more mailing lists