| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d611589b-a51f-6807-c3bf-5953e7ff2245@microchip.com>
Date: Fri, 8 Jul 2022 14:34:40 +0000
From: <Conor.Dooley@...rochip.com>
To: <thierry.reding@...il.com>, <u.kleine-koenig@...gutronix.de>,
<lee.jones@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>
CC: <Daire.McNamara@...rochip.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pwm@...r.kernel.org>,
<linux-riscv@...ts.infradead.org>
Subject: Re: [PATCH v4 2/4] riscv: dts: fix the icicle's #pwm-cells
On 08/07/2022 15:29, Conor Dooley wrote:
> \#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 &
> blindly overridden by the (out of tree) driver anyway. The core can
> support inverted operation, so update the entry to correctly report its
> capabilities.
>
> Fixes: 72560c6559b8 ("riscv: dts: microchip: add fpga fabric section to icicle kit")
> Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
Gah, I messed this patch up... I'll resend.
> ---
> .../dts/microchip/mpfs-icicle-kit-fabric.dtsi | 2 +-
> .../dts/microchip/mpfs-tysom-m-fabric.dtsi | 18 ++
> .../riscv/boot/dts/microchip/mpfs-tysom-m.dts | 185 ++++++++++++++++++
> 3 files changed, 204 insertions(+), 1 deletion(-)
> create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
>
> diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
> index 0d28858b83f2..e09a13aef268 100644
> --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
> +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
> @@ -8,7 +8,7 @@ core_pwm0: pwm@...00000 {
> compatible = "microchip,corepwm-rtl-v4";
> reg = <0x0 0x41000000 0x0 0xF0>;
> microchip,sync-update-mask = /bits/ 32 <0>;
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> clocks = <&fabric_clk3>;
> status = "disabled";
> };
> diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> new file mode 100644
> index 000000000000..98f642e83ad4
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2022 Microchip Technology Inc */
> +
> +// #include "dt-bindings/mailbox/miv-ihc.h"
> +
> +/ {
> + fabric_clk3: fabric-clk3 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <62500000>;
> + };
> +
> + fabric_clk1: fabric-clk1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +};
> diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
> new file mode 100644
> index 000000000000..0b664c591255
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
> @@ -0,0 +1,185 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Original all-in-one devicetree:
> + * Copyright (C) 2020-2022 - Aldec
> + * Rewritten to use includes:
> + * Copyright (C) 2022 - Conor Dooley <conor.dooley@...rochip.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "mpfs.dtsi"
> +#include "mpfs-tysom-m-fabric.dtsi"
> +
> +/* Clock frequency (in Hz) of the rtcclk */
> +#define MTIMER_FREQ 1000000
> +
> +/ {
> + model = "Aldec TySOM-M-MPFS250T";
> + compatible = "aldec,tysom-m-mpfs250t", "microchip,mpfs";
> +
> + aliases {
> + ethernet0 = &mac0;
> + ethernet1 = &mac1;
> + serial0 = &mmuart0;
> + serial1 = &mmuart1;
> + serial2 = &mmuart2;
> + serial3 = &mmuart3;
> + serial4 = &mmuart4;
> + gpio0 = &gpio0;
> + gpio1 = &gpio2;
> + };
> +
> + chosen {
> + stdout-path = "serial1:115200n8";
> + };
> +
> + cpus {
> + timebase-frequency = <MTIMER_FREQ>;
> + };
> +
> + ddrc_cache_lo: memory@...00000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x0 0x2e000000>;
> + status = "okay";
> + };
> +
> + ddrc_cache_hi: memory@...0000000 {
> + device_type = "memory";
> + reg = <0x10 0x00000000 0x0 0x40000000>;
> + status = "okay";
> + };
> +
> + soc {
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> +
> + led0 {
> + gpios = <&gpio1 23 1>;
> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> + ina219: ina219@45 {
> + status = "okay";
> + compatible = "ti,ina219";
> + reg = <0x45>;
> + shunt-resistor = <0x7d0>;
> + };
> +};
> +
> +&gpio1 {
> + interrupts = <27 28 29 30 31 32 33 47 35 36 37 38 39 40 41 42 43 44 45 46 34 48 49 50>;
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + phy-mode = "gmii";
> + phy-handle = <&phy0>;
> +
> +};
> +
> +&mac1 {
> + status = "okay";
> + phy-mode = "gmii";
> + phy-handle = <&phy1>;
> + phy1: ethernet-phy@1 {
> + reg = <1>;
> + ti,fifo-depth = <0x01>;
> + };
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + ti,fifo-depth = <0x01>;
> + };
> +};
> +
> +&mbox {
> + status = "okay";
> +};
> +
> +&mmc {
> + max-frequency = <200000000>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + no-1-8-v;
> + disable-wp;
> + status = "okay";
> +};
> +
> +&mmuart1 {
> + status = "okay";
> +};
> +
> +&mmuart2 {
> + status = "okay";
> +};
> +
> +&mmuart3 {
> + status = "okay";
> +};
> +
> +&mmuart4 {
> + status = "okay";
> +};
> +
> +&refclk {
> + clock-frequency = <125000000>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +};
> +
> +&spi1 {
> + status = "okay";
> + pseFlash@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a11", "jedec,spi-nor";
> + status = "okay";
> + reg = <0x0>;
> + spi-max-frequency = <10000000>;
> +
> + partition@...t-0 { /* test purposes */
> + label = "qspi-test-0";
> + reg = <0x00000000 0x00800000>;
> + };
> + partition@...t-1 { /* test purposes */
> + label = "qspi-test-1";
> + reg = <0x00800000 0x00800000>;
> + };
> + partition@...t-2 { /* test purposes */
> + label = "qspi-test-2";
> + reg = <0x01000000 0x00800000>;
> + };
> + partition@...t-3 { /* test purposes */
> + label = "qspi-test-3";
> + reg = <0x01800000 0x00800000>;
> + };
> + };
> +};
> +
> +&syscontroller {
> + status = "okay";
> +};
> +
> +&usb {
> + status = "okay";
> + dr_mode = "host";
> +};
Powered by blists - more mailing lists