[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cd0f60ef-9c1a-69c4-2971-df5b2c43cc21@oracle.com>
Date: Tue, 12 Jul 2022 15:31:11 -0500
From: Eric DeVolder <eric.devolder@...cle.com>
To: Baoquan He <bhe@...hat.com>
Cc: Sourabh Jain <sourabhjain@...ux.ibm.com>,
linux-kernel@...r.kernel.org, x86@...nel.org,
kexec@...ts.infradead.org, ebiederm@...ssion.com,
dyoung@...hat.com, vgoyal@...hat.com, tglx@...utronix.de,
mingo@...hat.com, bp@...en8.de, dave.hansen@...ux.intel.com,
hpa@...or.com, nramas@...ux.microsoft.com, thomas.lendacky@....com,
robh@...nel.org, efault@....de, rppt@...nel.org, david@...hat.com,
konrad.wilk@...cle.com, boris.ostrovsky@...cle.com
Subject: Re: [PATCH v9 7/7] x86/crash: Add x86 crash hotplug support
On 7/11/22 04:57, Baoquan He wrote:
> On 07/07/22 at 07:55am, Eric DeVolder wrote:
>>
>>
>> On 6/20/22 00:06, Sourabh Jain wrote:
>>> Hello Eric,
>>>
>>> On 14/06/22 04:12, Eric DeVolder wrote:
>>>> For x86_64, when CPU or memory is hot un/plugged, the crash
>>>> elfcorehdr, which describes the CPUs and memory in the system,
>>>> must also be updated.
>>>>
>>>> When loading the crash kernel via kexec_load or kexec_file_load,
>>>> the elfcorehdr is identified at run time in
>>>> crash_core:handle_hotplug_event().
>>>>
>>>> To update the elfcorehdr for x86_64, a new elfcorehdr must be
>>>> generated from the available CPUs and memory. The new elfcorehdr
>>>> is prepared into a buffer, and then installed over the top of
>>>> the existing elfcorehdr.
>>>>
>>>> In the patch 'kexec: exclude elfcorehdr from the segment digest'
>>>> the need to update purgatory due to the change in elfcorehdr was
>>>> eliminated. As a result, no changes to purgatory or boot_params
>>>> (as the elfcorehdr= kernel command line parameter pointer
>>>> remains unchanged and correct) are needed, just elfcorehdr.
>>>>
>>>> To accommodate a growing number of resources via hotplug, the
>>>> elfcorehdr segment must be sufficiently large enough to accommodate
>>>> changes, see the CRASH_MAX_MEMORY_RANGES configure item.
>>>>
>>>> With this change, crash hotplug for kexec_file_load syscall
>>>> is supported. The kexec_load is also supported, but also
>>>> requires a corresponding change to userspace kexec-tools.
>>>>
>>>> Signed-off-by: Eric DeVolder <eric.devolder@...cle.com>
>>>> ---
>>>> arch/x86/Kconfig | 11 ++++
>>>> arch/x86/kernel/crash.c | 116 ++++++++++++++++++++++++++++++++++++++++
>>>> 2 files changed, 127 insertions(+)
>>>>
>>>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>>>> index 762a0b6ab8b6..e9eecff3b97d 100644
>>>> --- a/arch/x86/Kconfig
>>>> +++ b/arch/x86/Kconfig
>>>> @@ -2082,6 +2082,17 @@ config CRASH_DUMP
>>>> (CONFIG_RELOCATABLE=y).
>>>> For more details see Documentation/admin-guide/kdump/kdump.rst
>>>> +config CRASH_MAX_MEMORY_RANGES
>>>> + depends on CRASH_DUMP && KEXEC_FILE && (HOTPLUG_CPU || MEMORY_HOTPLUG)
>>>> + int
>>>> + default 32768
>>>> + help
>>>> + For the kexec_file_load path, specify the maximum number of
>>>> + memory regions, eg. as represented by the 'System RAM' entries
>>>> + in /proc/iomem, that the elfcorehdr buffer/segment can accommodate.
>>>> + This value is combined with NR_CPUS and multiplied by Elf64_Phdr
>>>> + size to determine the final buffer size.
>>>> +
>>>> config KEXEC_JUMP
>>>> bool "kexec jump"
>>>> depends on KEXEC && HIBERNATION
>>>> diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
>>>> index 9db41cce8d97..b9cdf7a0d868 100644
>>>> --- a/arch/x86/kernel/crash.c
>>>> +++ b/arch/x86/kernel/crash.c
>>>> @@ -25,6 +25,7 @@
>>>> #include <linux/slab.h>
>>>> #include <linux/vmalloc.h>
>>>> #include <linux/memblock.h>
>>>> +#include <linux/highmem.h>
>>>> #include <asm/processor.h>
>>>> #include <asm/hardirq.h>
>>>> @@ -398,7 +399,17 @@ int crash_load_segments(struct kimage *image)
>>>> image->elf_headers = kbuf.buffer;
>>>> image->elf_headers_sz = kbuf.bufsz;
>>>> +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_MEMORY_HOTPLUG)
>>>> + /* Ensure elfcorehdr segment large enough for hotplug changes */
>>>> + kbuf.memsz = (CONFIG_NR_CPUS_DEFAULT + CONFIG_CRASH_MAX_MEMORY_RANGES) * sizeof(Elf64_Phdr);
>>>> + /* For marking as usable to crash kernel */
>>>> + image->elf_headers_sz = kbuf.memsz;
>>>> + /* Record the index of the elfcorehdr segment */
>>>> + image->elfcorehdr_index = image->nr_segments;
>>>> + image->elfcorehdr_index_valid = true;
>>>> +#else
>>>> kbuf.memsz = kbuf.bufsz;
>>>> +#endif
>>>> kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
>>>> kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
>>>> ret = kexec_add_buffer(&kbuf);
>>>> @@ -413,3 +424,108 @@ int crash_load_segments(struct kimage *image)
>>>> return ret;
>>>> }
>>>> #endif /* CONFIG_KEXEC_FILE */
>>>> +
>>>> +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_MEMORY_HOTPLUG)
>>>> +int crash_hotplug_support(void) { return 1; }
>>>> +void *arch_map_crash_pages(unsigned long paddr, unsigned long size)
>>>> +{
>>>> + /*
>>>> + * NOTE: The addresses and sizes passed to this routine have
>>>> + * already been fully aligned on page boundaries. There is no
>>>> + * need for massaging the address or size.
>>>> + */
>>>> + void *ptr = NULL;
>>>> +
>>>> + /* NOTE: requires arch_kexec_[un]protect_crashkres() for write access */
>>>> + if (size > 0) {
>>>> + struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
>>>> +
>>>> + ptr = kmap(page);
>>>> + }
>>>> +
>>>> + return ptr;
>>>> +}
>>>> +
>>>> +void arch_unmap_crash_pages(void **ptr)
>>>> +{
>>>> + if (ptr) {
>>>> + if (*ptr)
>>>> + kunmap(*ptr);
>>>> + *ptr = NULL;
>>>> + }
>>>> +}
>>>
>>> Aren't arch will have build issue if arch_[un]map_crash_pages methods are not defined?
>> Sourabh,
>> Yes, you are correct. I'll add __weak versions of each in crash_core.c in the next patch.
>
> Just a reminder, __weak is deprecated and has been cleaned up in
> kernel/kexec*.c in below patch.
>
> [PATCH 0/2] kexec: Drop __weak attributes from functions
>
Baoquan,
Thanks for the pointer! I have corrected this code to do away with __weak and use the style
presented in the kexec patch.
Eric
Powered by blists - more mailing lists