linux-kernel - Re: [PATCH v2 2/3] spi: microchip-core-qspi: Add support for microchip fpga qspi controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <08b60fe9-6e89-b10e-dcfa-5a0d53912676@linaro.org>
Date:   Tue, 2 Aug 2022 12:25:49 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Naga Sureshkumar Relli <nagasuresh.relli@...rochip.com>,
        broonie@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor.dooley@...rochip.com
Cc:     linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] spi: microchip-core-qspi: Add support for
 microchip fpga qspi controllers

On 02/08/2022 09:05, Naga Sureshkumar Relli wrote:
> +
> +	qspi->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(qspi->clk)) {
> +		dev_err(&pdev->dev, "clock not found.\n");

Same comments as v1.

> +		ret = PTR_ERR(qspi->clk);
> +		goto remove_master;
> +	}
> +
> +	ret = clk_prepare_enable(qspi->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable clock\n");
> +		goto remove_master;
> +	}
> +
> +	init_completion(&qspi->data_completion);
> +	mutex_init(&qspi->op_lock);
> +
> +	qspi->irq = platform_get_irq(pdev, 0);
> +	if (qspi->irq <= 0) {
> +		ret = qspi->irq;
> +		goto clk_dis_all;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, qspi->irq, mchp_coreqspi_isr,
> +			       IRQF_SHARED, pdev->name, qspi);
> +	if (ret) {
> +		dev_err(&pdev->dev, "request_irq failed %d\n", ret);
> +		goto clk_dis_all;
> +	}
> +
> +	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
> +	ctlr->mem_ops = &mchp_coreqspi_mem_ops;
> +	ctlr->setup = mchp_coreqspi_setup_op;
> +	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
> +			  SPI_TX_DUAL | SPI_TX_QUAD;
> +	ctlr->dev.of_node = np;
> +
> +	ret = devm_spi_register_controller(&pdev->dev, ctlr);
> +	if (ret) {
> +		dev_err(&pdev->dev, "spi_register_controller failed\n");
> +		goto clk_dis_all;
> +	}
> +
> +	return 0;
> +
> +clk_dis_all:
> +	clk_disable_unprepare(qspi->clk);
> +remove_master:
> +	spi_controller_put(ctlr);
> +
> +	return ret;
> +}
> +
> +static int mchp_coreqspi_remove(struct platform_device *pdev)
> +{
> +	struct mchp_coreqspi *qspi = platform_get_drvdata(pdev);
> +	u32 control = readl_relaxed(qspi->regs + REG_CONTROL);
> +
> +	mchp_coreqspi_disable_ints(qspi);
> +	control &= ~CONTROL_ENABLE;
> +	writel_relaxed(control, qspi->regs + REG_CONTROL);
> +	clk_disable_unprepare(qspi->clk);
> +
> +	return 0;
> +}
> +
> +/*
> + * Platform driver data structure

Same comments as v1.

> + */
> +static const struct of_device_id mchp_coreqspi_of_match[] = {
> +	{ .compatible = "microchip,mpfs-qspi" },
> +	{ .compatible = "microchip,coreqspi-rtl-v2" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mchp_coreqspi_of_match);
> +
Best regards,
Krzysztof