| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cf4fbfed-a0cf-0ffd-5482-09c68b463d7c@quicinc.com>
Date: Mon, 3 Oct 2022 14:37:15 -0500
From: Melody Olvera <quic_molvera@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Taniya Das <quic_tdas@...cinc.com>
Subject: Re: [PATCH 3/5] clk: qcom: Add QDU1000 and QRU1000 GCC support
On 10/1/2022 2:10 AM, Dmitry Baryshkov wrote:
> On Sat, 1 Oct 2022 at 06:05, Melody Olvera <quic_molvera@...cinc.com> wrote:
>> From: Taniya Das <quic_tdas@...cinc.com>
>>
>> Add Global Clock Controller (GCC) support for QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Taniya Das <quic_tdas@...cinc.com>
>> Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
>> ---
>> drivers/clk/qcom/Kconfig | 8 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/clk-branch.c | 5 +
>> drivers/clk/qcom/clk-branch.h | 2 +
>> drivers/clk/qcom/gcc-qdru1000.c | 2649 +++++++++++++++++++++++++++++++
>> 5 files changed, 2665 insertions(+)
>> create mode 100644 drivers/clk/qcom/gcc-qdru1000.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 1cf1ef70e347..195c018c6f87 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -696,6 +696,14 @@ config SM_GCC_8450
>> Say Y if you want to use peripheral devices such as UART,
>> SPI, I2C, USB, SD/UFS, PCIe etc.
>>
>> +config QDRU_GCC_1000
>> + tristate "QDU1000/QRU1000 Global Clock Controller"
>> + select QCOM_GDSC
>> + help
>> + Support for the global clock controller on QDU1000 and
>> + QRU1000 devices. Say Y if you want to use peripheral
>> + devices such as UART, SPI, I2C, USB, SD, PCIe, etc.
>> +
>> config SM_GPUCC_6350
>> tristate "SM6350 Graphics Clock Controller"
>> select SM_GCC_6350
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index fbcf04073f07..080253a338e7 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -100,6 +100,7 @@ obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
>> obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
>> obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o
>> obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
>> +obj-$(CONFIG_QDRU_GCC_1000) += gcc-qdru1000.o
>> obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
>> obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
>> obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
>> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
>> index f869fc6aaed6..b5dc1f4ef277 100644
>> --- a/drivers/clk/qcom/clk-branch.c
>> +++ b/drivers/clk/qcom/clk-branch.c
>> @@ -1,6 +1,7 @@
>> // SPDX-License-Identifier: GPL-2.0
>> /*
>> * Copyright (c) 2013, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
>> */
>>
>> #include <linux/kernel.h>
>> @@ -56,6 +57,10 @@ static bool clk_branch2_check_halt(const struct clk_branch *br, bool enabling)
>>
>> if (enabling) {
>> val &= mask;
>> +
>> + if (br->halt_check == BRANCH_HALT_INVERT)
>> + return (val & BRANCH_CLK_OFF) == BRANCH_CLK_OFF;
>> +
>> return (val & BRANCH_CLK_OFF) == 0 ||
>> val == BRANCH_NOC_FSM_STATUS_ON;
>> } else {
>> diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
>> index 17a58119165e..4ac1debeb91e 100644
>> --- a/drivers/clk/qcom/clk-branch.h
>> +++ b/drivers/clk/qcom/clk-branch.h
>> @@ -1,5 +1,6 @@
>> /* SPDX-License-Identifier: GPL-2.0 */
>> /* Copyright (c) 2013, The Linux Foundation. All rights reserved. */
>> +/* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. */
>>
>> #ifndef __QCOM_CLK_BRANCH_H__
>> #define __QCOM_CLK_BRANCH_H__
>> @@ -33,6 +34,7 @@ struct clk_branch {
>> #define BRANCH_HALT_ENABLE_VOTED (BRANCH_HALT_ENABLE | BRANCH_VOTED)
>> #define BRANCH_HALT_DELAY 2 /* No bit to check; just delay */
>> #define BRANCH_HALT_SKIP 3 /* Don't check halt bit */
>> +#define BRANCH_HALT_INVERT 4 /* Invert logic for halt bit */
>>
>> struct clk_regmap clkr;
>> };
> I'm tempted to ask to move these two chunks to a separate commit.
That makes sense to me; will separate these into their own commit.
>
>> diff --git a/drivers/clk/qcom/gcc-qdru1000.c b/drivers/clk/qcom/gcc-qdru1000.c
>> new file mode 100644
>> index 000000000000..4bc54f7b43a0
>> --- /dev/null
>> +++ b/drivers/clk/qcom/gcc-qdru1000.c
>> @@ -0,0 +1,2649 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/clock/qcom,gcc-qdru1000.h>
>> +
>> +#include "clk-alpha-pll.h"
>> +#include "clk-branch.h"
>> +#include "clk-rcg.h"
>> +#include "clk-regmap.h"
>> +#include "clk-regmap-divider.h"
>> +#include "clk-regmap-mux.h"
>> +#include "clk-regmap-phy-mux.h"
>> +#include "reset.h"
>> +
>> +enum {
>> + P_BI_TCXO,
>> + P_GCC_GPLL0_OUT_EVEN,
>> + P_GCC_GPLL0_OUT_MAIN,
>> + P_GCC_GPLL1_OUT_MAIN,
>> + P_GCC_GPLL2_OUT_MAIN,
>> + P_GCC_GPLL3_OUT_MAIN,
>> + P_GCC_GPLL4_OUT_MAIN,
>> + P_GCC_GPLL5_OUT_MAIN,
>> + P_GCC_GPLL6_OUT_MAIN,
>> + P_GCC_GPLL7_OUT_MAIN,
>> + P_GCC_GPLL8_OUT_MAIN,
>> + P_PCIE_0_PHY_AUX_CLK,
>> + P_PCIE_0_PIPE_CLK,
>> + P_SLEEP_CLK,
>> + P_USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK,
>> +};
>> +
>> +static struct clk_alpha_pll gcc_gpll0 = {
>> + .offset = 0x0,
>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
>> + .clkr = {
>> + .enable_reg = 0x62018,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data){
>> + .name = "gcc_gpll0",
>> + .parent_data = &(const struct clk_parent_data){
>> + .fw_name = "bi_tcxo",
> New drivers are requested to use .index rather than .fw_name.
Got it; will fix.
>
>> + },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_fixed_lucid_evo_ops,
>> + },
>> + },
>> +};
>> +
>> +static const struct clk_div_table post_div_table_gcc_gpll0_out_even[] = {
>> + { 0x1, 2 },
>> + { }
> No need for a sentinel here
Understood.
>
>> +};
>> +
> [skipped]
>
>
>> +
>> +static int gcc_qdru1000_probe(struct platform_device *pdev)
>> +{
>> + struct regmap *regmap;
>> + int ret;
>> +
>> + regmap = qcom_cc_map(pdev, &gcc_qdru1000_desc);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + /* Update FORCE_MEM_CORE_ON for gcc_pcie_0_mstr_axi_clk */
>> + regmap_update_bits(regmap, 0x9d024, BIT(14), BIT(14));
>> +
>> + ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
>> + ARRAY_SIZE(gcc_dfs_clocks));
>> + if (ret)
>> + return ret;
>> +
>> + ret = qcom_cc_really_probe(pdev, &gcc_qdru1000_desc, regmap);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to register GCC clocks\n");
>> + return ret;
>> + }
> if (ret)
> return dev_err_probe(....);
Got it.
>
>> +
>> + dev_info(&pdev->dev, "Registered GCC clocks\n");
>
> No need to spam here.
Will remove.
>
>> +
>> + return ret;
>> +}
>> +
>> +static struct platform_driver gcc_qdru1000_driver = {
>> + .probe = gcc_qdru1000_probe,
>> + .driver = {
>> + .name = "gcc-qdru1000",
>> + .of_match_table = gcc_qdru1000_match_table,
>> + },
>> +};
>> +
>> +static int __init gcc_qdru1000_init(void)
>> +{
>> + return platform_driver_register(&gcc_qdru1000_driver);
>> +}
>> +subsys_initcall(gcc_qdru1000_init);
>> +
>> +static void __exit gcc_qdru1000_exit(void)
>> +{
>> + platform_driver_unregister(&gcc_qdru1000_driver);
>> +}
>> +module_exit(gcc_qdru1000_exit);
>> +
>> +MODULE_DESCRIPTION("QTI GCC QDRU1000 Driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.37.3
>>
Thanks,
Melody
Powered by blists - more mailing lists