[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <12113751.O9o76ZdvQC@falcon9>
Date: Mon, 14 Nov 2022 15:03:07 -0500
From: Detlev Casanova <detlev.casanova@...labora.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: linux-kernel@...r.kernel.org, Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
"open list:ARM/RENESAS ARCHITECTURE"
<linux-renesas-soc@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: renesas: r8a77951: Add reserved memory region
On Monday, November 14, 2022 2:57:21 P.M. EST Geert Uytterhoeven wrote:
> Hi Detlev,
>
> On Mon, Nov 14, 2022 at 8:48 PM Detlev Casanova
>
> <detlev.casanova@...labora.com> wrote:
> > The 0x3000000 bytes memory region starting at 0x54000000 is
> > reserved for the lossy_decompression hardware that will try to
> > decompress any data written in the region.
> >
> > Mark the region as no-map to prevent linux from using it as RAM.
> >
> > Signed-off-by: Detlev Casanova <detlev.casanova@...labora.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
> > @@ -290,6 +290,18 @@ CPU_SLEEP_1: cpu-sleep-1 {
> >
> > };
> >
> > };
> >
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + /* device specific region for Lossy Decompression */
> > + lossy_decompress: memory-region@...00000 {
> > + no-map;
> > + reg = <0x00000000 0x54000000 0x0 0x03000000>;
> > + };
> > + };
>
> This depends on the firmware/boot loader stack. If it configures a
> Lossy Decompression region, it should make sure to pass this
> info through the various boot loader components to Linux,
> just like is already done with the memory regions, RPC-IF state,
> and OpTee configuration.
Thanks for your fast answer ! I didn't realise ATF was doing that, I probably
have a configuration issue in ATF then, I'll rebuild and start from there.
Thanks !
> Gr{oetje,eeting}s,
>
> Geert
Powered by blists - more mailing lists