[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y4DD/5BtgD3TjdW2@boxer>
Date: Fri, 25 Nov 2022 14:32:47 +0100
From: Maciej Fijalkowski <maciej.fijalkowski@...el.com>
To: Akihiko Odaki <akihiko.odaki@...nix.com>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<intel-wired-lan@...ts.osuosl.org>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Yan Vugenfirer" <yan@...nix.com>,
Yuri Benditovich <yuri.benditovich@...nix.com>
Subject: Re: [PATCH net v4] igb: Allocate MSI-X vector when testing
On Fri, Nov 25, 2022 at 10:30:31PM +0900, Akihiko Odaki wrote:
> Without this change, the interrupt test fail with MSI-X environment:
>
> $ sudo ethtool -t enp0s2 offline
> [ 43.921783] igb 0000:00:02.0: offline testing starting
> [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down
> [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 51.272202] igb 0000:00:02.0: testing shared interrupt
> [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> The test result is FAIL
> The test extra info:
> Register test (offline) 0
> Eeprom test (offline) 0
> Interrupt test (offline) 4
> Loopback test (offline) 0
> Link test (on/offline) 0
>
> Here, "4" means an expected interrupt was not delivered.
>
> To fix this, route IRQs correctly to the first MSI-X vector by setting
> IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be
> masked. The interrupt test now runs properly with this change:
>
> $ sudo ethtool -t enp0s2 offline
> [ 42.762985] igb 0000:00:02.0: offline testing starting
> [ 50.141967] igb 0000:00:02.0: testing shared interrupt
> [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> The test result is PASS
> The test extra info:
> Register test (offline) 0
> Eeprom test (offline) 0
> Interrupt test (offline) 0
> Loopback test (offline) 0
> Link test (on/offline) 0
>
> Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test")
> Signed-off-by: Akihiko Odaki <akihiko.odaki@...nix.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@...el.com>
> ---
> V3 -> V4: Added Fixes: tag
>
> drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> index e5f3e7680dc6..ff911af16a4b 100644
> --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
> +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> @@ -1413,6 +1413,8 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
> *data = 1;
> return -1;
> }
> + wr32(E1000_IVAR_MISC, E1000_IVAR_VALID << 8);
> + wr32(E1000_EIMS, BIT(0));
> } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
> shared_int = false;
> if (request_irq(irq,
> --
> 2.38.1
>
Powered by blists - more mailing lists