[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221228200234.86391-1-mig@semihalf.com>
Date: Wed, 28 Dec 2022 21:02:34 +0100
From: Michał Grzelak <mig@...ihalf.com>
To: linux-kernel@...r.kernel.org
Cc: andrew@...n.ch, sebastian.hesselbarth@...il.com,
gregory.clement@...tlin.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
mw@...ihalf.com, upstream@...ihalf.com, mchl.grzlk@...il.com,
Michał Grzelak <mig@...ihalf.com>
Subject: [PATCH v2] ARM: dts: dove.dtsi: Move ethphy to fix schema error
Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
gives the following warnings:
mdio-bus@...04: Unevaluated properties are not allowed
('ethernet-phy' was unexpected)
arch/arm/boot/dts/dove-cubox.dtb
arch/arm/boot/dts/dove-cubox-es.dtb
arch/arm/boot/dts/dove-d2plug.dtb
arch/arm/boot/dts/dove-d2plug.dtb
arch/arm/boot/dts/dove-dove-db.dtb
arch/arm/boot/dts/dove-d3plug.dtb
arch/arm/boot/dts/dove-sbc-a510.dtb
Fix them by removing empty ethphy subnode from dove.dtsi and describe
PHY on the relevant board .dts files level.
Signed-off-by: Michał Grzelak <mig@...ihalf.com>
---
arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
arch/arm/boot/dts/dove-cubox.dts | 15 +++++++++++----
arch/arm/boot/dts/dove.dtsi | 5 -----
3 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
index 9b9dfbe07be4..2f2f0a4bf004 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -124,9 +124,17 @@ wifi_power: regulator@1 {
};
/* Optional RTL8211D GbE PHY on SMI address 0x03 */
-ðphy {
- reg = <3>;
- status = "disabled";
+&mdio {
+ ethphy: ethernet-phy@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+};
+
+ð {
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
};
&i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 2639b9fe0ab4..170c14d7f5c8 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -72,11 +72,18 @@ gpu-subsystem {
&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
&mdio { status = "okay"; };
-ð { status = "okay"; };
+ð {
+ status = "okay";
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
-ðphy {
- compatible = "marvell,88e1310";
- reg = <1>;
+&mdio {
+ ethphy: ethernet-phy@1 {
+ compatible = "marvell,88e1310";
+ reg = <1>;
+ };
};
&gpu {
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..c7a3fa33c56e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -382,7 +382,6 @@ ethernet-port@0 {
interrupts = <29>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <ðphy>;
};
};
@@ -394,10 +393,6 @@ mdio: mdio-bus@...04 {
interrupts = <30>;
clocks = <&gate_clk 2>;
status = "disabled";
-
- ethphy: ethernet-phy {
- /* set phy address in board file */
- };
};
sdio0: sdio-host@...00 {
--
2.34.1
Powered by blists - more mailing lists