| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230119030422.askkliovlyonurvz@builder.lan>
Date: Wed, 18 Jan 2023 21:04:22 -0600
From: Bjorn Andersson <andersson@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, agross@...nel.org,
krzysztof.kozlowski@...aro.org, marijn.suijten@...ainline.org,
Amit Kucheria <amitk@...nel.org>,
Thara Gopinath <thara.gopinath@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Loic Poulain <loic.poulain@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [PATCH 2/2] firmware: qcom_scm: Fully implement
qcom_scm_lmh_dcvsh()
On Fri, Jan 13, 2023 at 04:14:01AM +0100, Konrad Dybcio wrote:
> The qcom_scm_lmh_dcvsh call can actually pass two values to the
> secure world. The second value is used for example with the
> LMH_FREQ_CAP function, which limits the maximum achievable frequency
> directly from LMh. Add the missing arguments, handle them and update
> the current usages of this function.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> drivers/firmware/qcom_scm.c | 13 ++++++++-----
> drivers/thermal/qcom/lmh.c | 28 ++++++++++++++--------------
> include/linux/qcom_scm.h | 5 +++--
> 3 files changed, 25 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index cdbfe54c8146..58a19a47e442 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -1252,12 +1252,13 @@ int qcom_scm_lmh_profile_change(u32 profile_id)
> }
> EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
>
> -int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
> - u64 limit_node, u32 node_id, u64 version)
> +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val0,
> + u32 payload_val1, u64 limit_node, u32 node_id,
> + u64 version, bool has_val1)
Rather than always passing a dummy payload_val1 and then having has_val1
to indicate if it should be considered or not... how about moving the
payload last in the call, as a va_list with a "count" before that?
I.e:
int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u64 limit_node, u32 node_id,
u64 version, unsigned int payload_count, ...)
> {
> dma_addr_t payload_phys;
> u32 *payload_buf;
> - int ret, payload_size = 5 * sizeof(u32);
> + int ret, payload_size = (5 + has_val1) * sizeof(u32);
allocate 4 + payload_count
>
> struct qcom_scm_desc desc = {
> .svc = QCOM_SCM_SVC_LMH,
> @@ -1278,8 +1279,10 @@ int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
> payload_buf[0] = payload_fn;
> payload_buf[1] = 0;
> payload_buf[2] = payload_reg;
> - payload_buf[3] = 1;
> - payload_buf[4] = payload_val;
> + payload_buf[3] = has_val1 ? 2 : 1;
> + payload_buf[4] = payload_val0;
> + if (has_val1)
> + payload_buf[5] = payload_val1;
Something like:
payload_buf[3] = payload_count;
va_start(ap, payload_count);
for (i = 0; i < payload_count; i++)
payload_buf[4 + i] = va_arg(ap, uint32_t);
va_end(ap);
That said, I don't see a single "true" below. Perhaps I'm missing it? I
would expect some code in the same series use the newly introduced
logic.
Thanks,
Bjorn
>
> desc.args[0] = payload_phys;
>
> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
> index 5e8ff196c9a6..d2b5ea8322eb 100644
> --- a/drivers/thermal/qcom/lmh.c
> +++ b/drivers/thermal/qcom/lmh.c
> @@ -147,23 +147,23 @@ static int lmh_probe(struct platform_device *pdev)
> return -EINVAL;
>
> if (flags & LMH_ENABLE_ALGOS) {
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret)
> dev_err(dev, "Error %d enabling current subfunction\n", ret);
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret)
> dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret)
> dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret) {
> dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
> return ret;
> @@ -177,22 +177,22 @@ static int lmh_probe(struct platform_device *pdev)
> }
>
> /* Set default thermal trips */
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret) {
> dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
> return ret;
> }
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret) {
> dev_err(dev, "Error setting thermal HI threshold%d\n", ret);
> return ret;
> }
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
> - LMH_NODE_DCVS, node_id, 0);
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low, 0,
> + LMH_NODE_DCVS, node_id, 0, false);
> if (ret) {
> dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
> return ret;
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index 1e449a5d7f5c..9fd798d17fdd 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -117,8 +117,9 @@ extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
> extern int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt);
> extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
>
> -extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
> - u64 limit_node, u32 node_id, u64 version);
> +extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val0,
> + u32 payload_val1, u64 limit_node, u32 node_id,
> + u64 version, bool has_val1);
> extern int qcom_scm_lmh_profile_change(u32 profile_id);
> extern bool qcom_scm_lmh_dcvsh_available(void);
>
> --
> 2.39.0
>
Powered by blists - more mailing lists