linux-kernel - [PATCH 1/2] spi: imx: Don't skip cleanup in remove's error path

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230306065733.2170662-2-u.kleine-koenig@pengutronix.de>
Date:   Mon,  6 Mar 2023 07:57:32 +0100
From:   Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
To:     Mark Brown <broonie@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Stefan Agner <stefan@...er.ch>
Cc:     Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        linux-spi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] spi: imx: Don't skip cleanup in remove's error path

Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.

Fixes: d593574aff0a ("spi: imx: do not access registers while clocks disabled")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
 drivers/spi/spi-imx.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index e4ccd0c329d0..6c9c87cd14ca 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1856,13 +1856,11 @@ static int spi_imx_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(controller);
 
-	ret = pm_runtime_resume_and_get(spi_imx->dev);
-	if (ret < 0) {
-		dev_err(spi_imx->dev, "failed to enable clock\n");
-		return ret;
-	}
-
-	writel(0, spi_imx->base + MXC_CSPICTRL);
+	ret = pm_runtime_get_sync(spi_imx->dev);
+	if (ret >= 0)
+		writel(0, spi_imx->base + MXC_CSPICTRL);
+	else
+		dev_warn(spi_imx->dev, "failed to enable clock, skip hw disable\n");
 
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
 	pm_runtime_put_sync(spi_imx->dev);
-- 
2.39.1