lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 3 May 2023 10:44:52 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Varadarajan Narayanan <quic_varada@...cinc.com>, amitk@...nel.org,
        thara.gopinath@...il.com, agross@...nel.org, andersson@...nel.org,
        konrad.dybcio@...aro.org, rafael@...nel.org,
        daniel.lezcano@...aro.org, rui.zhang@...el.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-pm@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Praveenkumar I <quic_ipkumar@...cinc.com>
Subject: Re: [PATCH v1 4/4] arm64: dts: qcom: ipq9574: add thermal zone nodes

On 03/05/2023 07:46, Varadarajan Narayanan wrote:
> This patch adds thermal zone nodes for the various
> sensors present in IPQ9574
> 
> Co-developed-by: Praveenkumar I <quic_ipkumar@...cinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>

one nit below.


> ---
> [v1]:
> 	Fix node names
> ---
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
>   1 file changed, 208 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index b22b999..bc4d061 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -1067,6 +1067,214 @@
>   		};
>   	};
>   
> +	thermal-zones {
> +		nss-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 3>;
> +
> +			trips {
> +				nss-top-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 4>;
> +
> +			trips {
> +				ubi_0-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 5>;
> +
> +			trips {
> +				ubi_1-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 6>;
> +
> +			trips {
> +				ubi_2-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 7>;
> +
> +			trips {
> +				ubi_3-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster0-thermal {

I think we were usually using cpussN instead of clusterN, but this is 
really a minor issue, we don't have that standardized.

> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 8>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 9>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 10>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 11>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 12>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 13>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		wcss-phyb-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 14>;
> +
> +			trips {
> +				wcss_phyb-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		top-glue-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 15>;
> +
> +			trips {
> +				top_glue-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>   	timer {
>   		compatible = "arm,armv8-timer";
>   		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

-- 
With best wishes
Dmitry

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ