| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1f1b0028106d83aa06e0777e91862a07df100fa1.1684767562.git.michal.simek@amd.com>
Date: Mon, 22 May 2023 16:59:50 +0200
From: Michal Simek <michal.simek@....com>
To: <linux-kernel@...r.kernel.org>, <monstr@...str.eu>,
<michal.simek@...inx.com>, <git@...inx.com>
CC: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>,
Ashok Reddy Soma <ashok.reddy.soma@...inx.com>,
Conor Dooley <conor+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Parth Gajjar <parth.gajjar@....com>,
"Rob Herring" <robh+dt@...nel.org>,
Srinivas Neeli <srinivas.neeli@...inx.com>,
Vishal Sagar <vishal.sagar@....com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v2 3/6] arm64: zynqmp: Set qspi tx-buswidth to 4
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>
All ZynqMP boards are setting up tx-buswidth to 1. Due to this the
framework only issues 1-1-1 write commands to the GQSPI driver. But the
GQSPI controller is capable of handling 1-4-4 write commands, so updated
the tx-buswidth to 4.
Using all 4 lines will increase the tx data transfer rate, as now the
tx data will be transferred on four lines instead on single line.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>
Signed-off-by: Michal Simek <michal.simek@....com>
---
Changes in v2:
- Update commit message to skip spi-nor part - reported by Laurent
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index c1ab1ab690df..84e18fdce775 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -124,7 +124,7 @@ spi_flash: flash@0 { /* MT25QU512A */
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <40000000>; /* 40MHz */
partition@0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
index 48d6a7202406..04079d1704f1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -44,7 +44,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
index e80484f9b137..3dec57cf18be 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -45,7 +45,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index af3331c133ad..d9d1de5f313c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -355,7 +355,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 05be71eab722..6636e76545a5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -173,7 +173,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index a074d8e2b86d..8767f147cbe3 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -957,7 +957,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 91c9b77f6b1f..e185709c0d84 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -444,7 +444,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 954044d9899f..7fceebd1815c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -456,7 +456,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index ab5e34b43642..27b2416cb6d8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -964,7 +964,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index f31365a14f73..6224365826d8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -794,7 +794,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
index e615286b8eff..c406017b0348 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
@@ -47,7 +47,7 @@ &qspi {
flash@0 {
compatible = "m25p80", "jedec,spi-nor";
reg = <0x0>;
- spi-tx-bus-width = <1>;
+ spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
};
--
2.36.1
Powered by blists - more mailing lists