| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7963595c-918b-1cc4-c8c6-b7668e62dfd5@microchip.com>
Date: Wed, 2 Aug 2023 10:39:02 +0000
From: <Hari.PrasathGE@...rochip.com>
To: <Manikandan.M@...rochip.com>, <lee@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Claudiu.Beznea@...rochip.com>,
<sam@...nborg.org>, <bbrezillon@...nel.org>, <airlied@...il.com>,
<daniel@...ll.ch>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>
CC: <Balamanikandan.Gunasundar@...rochip.com>,
<Durai.ManickamKR@...rochip.com>, <Nayabbasha.Sayed@...rochip.com>,
<Dharma.B@...rochip.com>, <Varshini.Rajendran@...rochip.com>,
<Balakrishnan.S@...rochip.com>
Subject: Re: [PATCH v2 6/9] drm: atmel_hlcdc: Add support for XLCDC in atmel
LCD driver
On 12/07/23 8:10 am, Manikandan Muralidharan wrote:
> - XLCDC in SAM9X7 has different sets of registers and additional
> configuration bits when compared to previous HLCDC IP. Read/write
> operation on the controller registers is now separated using the
> XLCDC status flag.
> - HEO scaling, window resampling, Alpha blending, YUV-to-RGB
> conversion in XLCDC is derived and handled using additional
> configuration bits and registers.
> - Writing one to the Enable fields of each layer in LCD_ATTRE
> is required to reflect the values set in Configuration, FBA, Enable
> registers of each layer
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@...rochip.com>
> Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@...rochip.com>
> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@...rochip.com>
> Co-developed-by: Durai Manickam KR <durai.manickamkr@...rochip.com>
> Signed-off-by: Durai Manickam KR <durai.manickamkr@...rochip.com>
> ---
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 32 +-
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 337 +++++++++++++++---
> 2 files changed, 312 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 58184cd6ab0b..27f86cea8bff 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -139,10 +139,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
> state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
> cfg = state->output_mode << 8;
>
> - if (adj->flags & DRM_MODE_FLAG_NVSYNC)
> + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
Instead of de-referencing the value of is_xlcdc flag multiple times, can
we have it assigned to a local variable instead to make it more readable
and avoid multiple memory accesses ?
> cfg |= ATMEL_HLCDC_VSPOL;
>
> - if (adj->flags & DRM_MODE_FLAG_NHSYNC)
> + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
> cfg |= ATMEL_HLCDC_HSPOL;
>
> regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
> @@ -177,6 +177,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
>
> pm_runtime_get_sync(dev->dev);
>
> + if (crtc->dc->desc->is_xlcdc) {
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
> + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + !(status & ATMEL_XLCDC_CM), 10,
> + 0))
> + cpu_relax();
cpu_relax() is not required here and at other places below since the
above function yields the cpu anyway,remove them.
> +
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
> + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + status & ATMEL_XLCDC_SD, 10,
> + 0))
> + cpu_relax();
> + }
> +
> regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
> while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> (status & ATMEL_HLCDC_DISP))
> @@ -231,6 +245,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
> !(status & ATMEL_HLCDC_DISP))
> cpu_relax();
>
> + if (crtc->dc->desc->is_xlcdc) {
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
> + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + status & ATMEL_XLCDC_CM, 10,
> + 0))
> + cpu_relax();
> +
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
> + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + !(status & ATMEL_XLCDC_SD), 10,
> + 0))
> + cpu_relax();
> + }
> +
> pm_runtime_put_sync(dev->dev);
>
> }
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> index daa508504f47..81f103b1a51f 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> @@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> yfactor));
> }
>
> +static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + u32 xfactor, yfactor;
> +
> + if (!desc->layout.scaler_config)
> + return;
> +
> + if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.scaler_config, 0);
> + return;
> + }
> +
> + /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
> + xfactor = (1048576 * state->src_w) / state->crtc_w;
Use the left shift operator to represent 2^20. The comment says we need
to round off the result of this math operation but the actual code
doesn't implement this.Look for kernel macro's that does this.Shouldn't
the variables xfactor & yfactor below be declared as u64 ?
> +
> + /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
> + yfactor = (1048576 * state->src_h) / state->crtc_h;
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
> + ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
> + ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
> + ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
> + ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
> + yfactor);
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
> + xfactor);
> +
> + /* As per YCbCr window resampling configuration */
> + if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
> + yfactor / 2);
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
> + xfactor / 2);
> + } else {
> + /* As per ARGB window resampling configuration */
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
> + yfactor);
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
> + xfactor);
> + }
> +}
> +
> static void
> atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
> struct atmel_hlcdc_plane_state *state)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>
> if (desc->layout.size)
> atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
> @@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
> ATMEL_HLCDC_LAYER_POS(state->crtc_x,
> state->crtc_y));
>
> - atmel_hlcdc_plane_setup_scaler(plane, state);
> + if (dc->desc->is_xlcdc)
> + atmel_xlcdc_plane_setup_scaler(plane, state);
> + else
> + atmel_hlcdc_plane_setup_scaler(plane, state);
> }
>
> static void
> @@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> cfg);
> }
>
> +static void
> +atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> +{
> + unsigned int cfg;
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + const struct drm_format_info *format = state->base.fb->format;
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
> + ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
> +
> + cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
> +
> + if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> + /*
> + * Alpha Blending bits specific to SAM9X7 SoC
> + */
> + cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
> + ATMEL_XLCDC_LAYER_SFACTA_ONE |
> + ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
> + ATMEL_XLCDC_LAYER_DFACTA_ONE;
> + if (format->has_alpha)
> + cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
> + else
> + cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
> + }
> +
> + if (state->disc_h && state->disc_w)
> + cfg |= ATMEL_XLCDC_LAYER_DISCEN;
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
> + cfg);
> +}
> +
> static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
> struct atmel_hlcdc_plane_state *state)
> {
> @@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
> }
> }
>
> +static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state, u32 sr, int i)
> +{
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> + state->dscrs[i]->self);
> +
> + if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> + state->dscrs[i]->addr);
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> + state->dscrs[i]->ctrl);
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> + state->dscrs[i]->self);
> + }
> +}
> +
> +static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state, int i)
> +{
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
> + state->dscrs[i]->addr);
> +}
> +
> static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
> - struct atmel_hlcdc_plane_state *state)
> + struct atmel_hlcdc_plane_state *state)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> struct drm_framebuffer *fb = state->base.fb;
> u32 sr;
> int i;
>
> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> + if (!dc->desc->is_xlcdc)
> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>
> for (i = 0; i < state->nplanes; i++) {
> struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
>
> state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
>
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> - state->dscrs[i]->self);
> -
> - if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> - state->dscrs[i]->addr);
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> - state->dscrs[i]->ctrl);
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> - state->dscrs[i]->self);
> - }
> + if (dc->desc->is_xlcdc)
> + update_xlcdc_buffers(plane, state, i);
> + else
> + update_hlcdc_buffers(plane, state, sr, i);
>
> if (desc->layout.xstride[i])
> atmel_hlcdc_layer_write_cfg(&plane->layer,
> @@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
> return 0;
> }
>
> -static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> - struct drm_atomic_state *state)
> +static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
> {
> - struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> -
> /* Disable interrupts */
> atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
> 0xffffffff);
> @@ -731,6 +832,72 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
> }
>
> +static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
> +{
> + /* Disable interrupts */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
> + 0xffffffff);
> +
> + /* Disable the layer */
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_XLCDC_LAYER_ENR, 0);
> +
> + /* Clear all pending interrupts */
> + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +}
> +
> +static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> + struct drm_atomic_state *state)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> + if (dc->desc->is_xlcdc)
> + xlcdc_atomic_disable(plane);
> + else
> + hlcdc_atomic_disable(plane);
> +}
> +
> +static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane)
> +{
> + u32 sr;
> +
> + /* Enable the overrun interrupts. */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> + ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> + ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> +
> + /* Apply the new config at the next SOF event. */
> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> + ATMEL_HLCDC_LAYER_UPDATE |
> + (sr & ATMEL_HLCDC_LAYER_EN ?
> + ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +}
> +
> +static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_dc *dc)
> +{
> + /* Enable the overrun interrupts. */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
> + ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(2));
> +
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
> + ATMEL_XLCDC_LAYER_EN);
> +
> + /*
> + * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
> + * (where xxx indicates each layer) requires writing one to the
> + * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
> + */
> + regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
> + ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
> + ATMEL_XLCDC_HEO_UPDATE);
> +}
> +
> static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> struct drm_atomic_state *state)
> {
> @@ -739,7 +906,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> struct atmel_hlcdc_plane_state *hstate =
> drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
> - u32 sr;
> + struct atmel_hlcdc_dc *dc = p->dev->dev_private;
>
> if (!new_s->crtc || !new_s->fb)
> return;
> @@ -750,29 +917,73 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> }
>
> atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
> - atmel_hlcdc_plane_update_general_settings(plane, hstate);
> + if (dc->desc->is_xlcdc)
> + atmel_xlcdc_plane_update_general_settings(plane, hstate);
> + else
> + atmel_hlcdc_plane_update_general_settings(plane, hstate);
> atmel_hlcdc_plane_update_format(plane, hstate);
> atmel_hlcdc_plane_update_clut(plane, hstate);
> atmel_hlcdc_plane_update_buffers(plane, hstate);
> atmel_hlcdc_plane_update_disc_area(plane, hstate);
>
> - /* Enable the overrun interrupts. */
> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> - ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> - ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> - ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> + if (dc->desc->is_xlcdc)
> + xlcdc_atomic_update(plane, dc);
> + else
> + hlcdc_atomic_update(plane);
> +}
>
> - /* Apply the new config at the next SOF event. */
> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> - ATMEL_HLCDC_LAYER_UPDATE |
> - (sr & ATMEL_HLCDC_LAYER_EN ?
> - ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + /*
> + * TODO: declare a "yuv-to-rgb-conv-factors" property to let
> + * userspace modify these factors (using a BLOB property ?).
> + */
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc,
> + 0x4c900091);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 1,
> + 0x7a5f5090);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 2,
> + 0x40040890);
> +}
> +
> +static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + /*
> + * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
> + * LCDC_HEOCFG21 registers in SAM9X7.
> + */
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc,
> + 0x00000488);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 1,
> + 0x00000648);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 2,
> + 0x1EA00480);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 3,
> + 0x00001D28);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 4,
> + 0x08100480);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 5,
> + 0x00000000);
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + 6,
> + 0x00000007);
> }
>
Both the above functions can be made more readable/easier to maintain by
having the configs in an array and just loop through them.
> static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>
> if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
> desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
> @@ -796,31 +1007,19 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
> return ret;
> }
>
> - if (desc->layout.csc) {
> - /*
> - * TODO: decare a "yuv-to-rgb-conv-factors" property to let
> - * userspace modify these factors (using a BLOB property ?).
> - */
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc,
> - 0x4c900091);
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc + 1,
> - 0x7a5f5090);
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc + 2,
> - 0x40040890);
> - }
Same as above.
> + if (dc->desc->is_xlcdc && desc->layout.csc)
> + xlcdc_csc_init(plane, desc);
> + else
> + if (desc->layout.csc)
> + hlcdc_csc_init(plane, desc);
>
> return 0;
> }
>
> -void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> {
> - const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> - u32 isr;
> -
> - isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
> + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>
> /*
> * There's not much we can do in case of overrun except informing
> @@ -834,6 +1033,34 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> desc->name);
> }
>
> +void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +
> + /*
> + * There's not much we can do in case of overrun except informing
> + * the user. However, we are in interrupt context here, hence the
> + * use of dev_dbg().
> + */
> + if (isr &
> + (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
> + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
> + desc->name);
use pr_warn() instead.
> +}
> +
> +void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> + if (dc->desc->is_xlcdc)
> + xlcdc_irq_dbg(plane, desc);
> + else
> + hlcdc_irq_dbg(plane, desc);
> +}
> +
> static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
> .atomic_check = atmel_hlcdc_plane_atomic_check,
> .atomic_update = atmel_hlcdc_plane_atomic_update,
Powered by blists - more mailing lists