lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZeirpIpcsPuBAiIR@lizhi-Precision-Tower-5810>
Date: Wed, 6 Mar 2024 12:45:08 -0500
From: Frank Li <Frank.li@....com>
To: Joshua Yeong <joshua.yeong@...rfivetech.com>
Cc: "alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
	"conor.culhane@...vaco.com" <conor.culhane@...vaco.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"ilpo.jarvinen@...ux.intel.com" <ilpo.jarvinen@...ux.intel.com>,
	"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
	"jirislaby@...nel.org" <jirislaby@...nel.org>,
	"joe@...ches.com" <joe@...ches.com>,
	"krzysztof.kozlowski+dt@...aro.org" <krzysztof.kozlowski+dt@...aro.org>,
	"krzysztof.kozlowski@...aro.org" <krzysztof.kozlowski@...aro.org>,
	"linux-i3c@...ts.infradead.org" <linux-i3c@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
	"miquel.raynal@...tlin.com" <miquel.raynal@...tlin.com>,
	"robh@...nel.org" <robh@...nel.org>,
	"zbigniew.lukwinski@...ux.intel.com" <zbigniew.lukwinski@...ux.intel.com>
Subject: Re: [PATCH v7 5/8] i3c: target: add svc target controller support

On Wed, Mar 06, 2024 at 04:01:17PM +0000, Joshua Yeong wrote:
> Hi Frank,
> 
> > -----Original Message-----
> > From: linux-i3c <linux-i3c-bounces@...ts.infradead.org> On Behalf Of Frank Li
> > Sent: Tuesday, February 6, 2024 7:33 AM
> > To: frank.li@....com
> > Cc: alexandre.belloni@...tlin.com; conor.culhane@...vaco.com;
> > devicetree@...r.kernel.org; gregkh@...uxfoundation.org;
> > ilpo.jarvinen@...ux.intel.com; imx@...ts.linux.dev; jirislaby@...nel.org;
> > joe@...ches.com; krzysztof.kozlowski+dt@...aro.org;
> > krzysztof.kozlowski@...aro.org; linux-i3c@...ts.infradead.org; linux-
> > kernel@...r.kernel.org; linux-serial@...r.kernel.org;
> > miquel.raynal@...tlin.com; robh@...nel.org;
> > zbigniew.lukwinski@...ux.intel.com
> > Subject: [PATCH v7 5/8] i3c: target: add svc target controller support
> > 
> > Add Silvaco I3C target controller support
> > 
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > ---
> > 
> > Notes:
> >     Change from v2 to v3
> >     - fix build warning
> > 
> >  drivers/i3c/master/Makefile         |   2 +-
> >  drivers/i3c/master/svc-i3c-main.c   |  35 +-
> >  drivers/i3c/master/svc-i3c-target.c | 776
> 
> I think putting target mode files under "master" might not make sense. We might have to
> consider that we may have a "secondary master" mode. Some other ways of splitting
> or handling of target mode is needed here.

I think name 'master' is not good here. Previously only support 'master'
mode, it should be fine. Now many controller are dual mode.

And I3C spec use 'controller/target' instead of 'master/slave'. I think
'controller' as master are quite confused. It can be master controller
and slave controller.

Anyway, slave/master may share some code and resource, even only one file.

So far, I think it is fine put under master now. we can rename 'master'
later when more dual mode controller added. 

Frank 

> 
> ...
> 
> > +
> > +#define I3C_SCONFIG	0x4
> > +#define   I3C_SCONFIG_SLVENA_MASK	BIT(0)
> > +#define	  I3C_SCONFIG_OFFLINE_MASK	BIT(9)
> > +#define   I3C_SCONFIG_SADDR_MASK	GENMASK(31, 25)
> > +
> > +#define I3C_SSTATUS	0x8
> > +#define	  I3C_SSTATUS_STNOTSTOP_MASK	BIT(0)
> > +#define	  I3C_SSTATUS_STOP_MASK		BIT(10)
> > +#define	  I3C_SSTATUS_RX_PEND_MASK	BIT(11)
> > +#define   I3C_SSTATUS_TXNOTFULL_MASK	BIT(12)
> > +#define	  I3C_SSTATUS_DACHG_MASK	BIT(13)
> > +#define	  I3C_SSTATUS_EVDET_MASK	GENMASK(21, 20)
> > +#define	  I3C_SSTATUS_EVDET_ACKED	0x3
> > +#define	  I3C_SSTATUS_IBIDIS_MASK	BIT(24)
> > +#define	  I3C_SSTATUS_HJDIS_MASK	BIT(27)
> > +
> 
> There is couple of space formatting here that requires to be fixed.
> 
> Cheers,
> Joshua

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ