linux-kernel - [PATCH v1 3/3] riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240517061713.95803-4-hal.feng@starfivetech.com>
Date: Fri, 17 May 2024 14:17:13 +0800
From: Hal Feng <hal.feng@...rfivetech.com>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jirislaby@...nel.org>,
	Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Conor Dooley <conor+dt@...nel.org>,
	Palmer Dabbelt <palmer@...belt.com>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Albert Ou <aou@...s.berkeley.edu>
Cc: Emil Renner Berthing <emil.renner.berthing@...onical.com>,
	Hal Feng <hal.feng@...rfivetech.com>,
	devicetree@...r.kernel.org,
	linux-serial@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v1 3/3] riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts

Add the core reset for uarts, which is necessary for uarts to work.

Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 30 ++++++++++++++----------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4a5708f7fcf7..872f52253a2e 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -387,12 +387,13 @@ plic: interrupt-controller@...0000 {
 		};
 
 		uart0: serial@...00000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART0_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>,
+				 <&syscrg JH7110_SYSRST_UART0_CORE>;
 			interrupts = <32>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -400,12 +401,13 @@ uart0: serial@...00000 {
 		};
 
 		uart1: serial@...10000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART1_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>,
+				 <&syscrg JH7110_SYSRST_UART1_CORE>;
 			interrupts = <33>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -413,12 +415,13 @@ uart1: serial@...10000 {
 		};
 
 		uart2: serial@...20000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART2_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>,
+				 <&syscrg JH7110_SYSRST_UART2_CORE>;
 			interrupts = <34>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -642,12 +645,13 @@ stg_syscon: syscon@...40000 {
 		};
 
 		uart3: serial@...00000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART3_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>,
+				 <&syscrg JH7110_SYSRST_UART3_CORE>;
 			interrupts = <45>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -655,12 +659,13 @@ uart3: serial@...00000 {
 		};
 
 		uart4: serial@...10000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART4_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>,
+				 <&syscrg JH7110_SYSRST_UART4_CORE>;
 			interrupts = <46>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -668,12 +673,13 @@ uart4: serial@...10000 {
 		};
 
 		uart5: serial@...20000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART5_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>,
+				 <&syscrg JH7110_SYSRST_UART5_CORE>;
 			interrupts = <47>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
-- 
2.43.2