[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e4bd515a-eb98-4ea1-8d73-4ba5e7c9b66e@linaro.org>
Date: Fri, 13 Dec 2024 12:50:12 +0200
From: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
To: Krzysztof Kozlowski <krzk@...nel.org>,
Luca Weiss <luca.weiss@...rphone.com>
Cc: Robert Foss <rfoss@...nel.org>, Todor Tomov <todor.too@...il.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Barnabas Czeman <barnabas.czeman@...nlining.org>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>,
Caleb Connolly <caleb.connolly@...aro.org>, David Heidelberg
<david@...t.cz>, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] media: dt-bindings: media: camss: Restrict bus-type
property
On 12/13/24 11:34, Krzysztof Kozlowski wrote:
> On Mon, Dec 09, 2024 at 01:01:05PM +0100, Luca Weiss wrote:
>> The CSIPHY of Qualcomm SoCs support both D-PHY and C-PHY standards for
>> CSI-2, but not any others so restrict the bus-type property describing
>> this to the supported values.
>>
>> The only exception here is MSM8916 which only supports D-PHY. C-PHY was
>> introduced with newer SoCs.
>>
>> Do note, that currently the Linux driver only supports D-PHY.
>>
>> Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
>> ---
>> .../bindings/media/qcom,msm8916-camss.yaml | 8 ++++++
>> .../bindings/media/qcom,msm8953-camss.yaml | 15 +++++++++++
>> .../bindings/media/qcom,msm8996-camss.yaml | 20 +++++++++++++++
>> .../bindings/media/qcom,sc8280xp-camss.yaml | 20 +++++++++++++++
>> .../bindings/media/qcom,sdm660-camss.yaml | 20 +++++++++++++++
>> .../bindings/media/qcom,sdm845-camss.yaml | 20 +++++++++++++++
>> .../bindings/media/qcom,sm8250-camss.yaml | 30 ++++++++++++++++++++++
>> 7 files changed, 133 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
>> index 9cc0a968a401836814560c1af3ee84d946500b4f..3de2a3d2b5b761106975aab65ff614b2ef579ef5 100644
>> --- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
>> +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
>> @@ -94,6 +94,10 @@ properties:
>> minItems: 1
>> maxItems: 4
>>
>> + bus-type:
>> + enum:
>> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
>> +
>> required:
>> - data-lanes
>>
>> @@ -113,6 +117,10 @@ properties:
>> minItems: 1
>> maxItems: 4
>>
>> + bus-type:
>> + enum:
>> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
>> +
But is it really needed to specify the single supported bus-type?
I believe it is not, at least it's not ever done for other media devices
like sensors.
Here I would prefer to get a comment from Linux Media and/or DTB experts.
--
Best wishes,
Vladimir
Powered by blists - more mailing lists