[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <htggncswmu7on2btxkkzvhgrey3yvafjsedtpx3a5ze2gtyxb3@ecyuawmn6q2v>
Date: Wed, 22 Jan 2025 14:36:25 +0100
From: Jacopo Mondi <jacopo.mondi@...asonboard.com>
To: Keke Li <keke.li@...ogic.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, kieran.bingham@...asonboard.com,
laurent.pinchart@...asonboard.com, dan.scally@...asonboard.com, jacopo.mondi@...asonboard.com
Subject: Re: [PATCH v5 01/10] dt-bindings: media: Add
amlogic,c3-mipi-csi2.yaml
Hi Keke, Krzysztof
On Fri, Dec 27, 2024 at 03:38:14PM +0800, Keke Li wrote:
> Hi Krzysztof
>
> Thanks for your reply
>
> On 2024/12/27 15:19, Krzysztof Kozlowski wrote:
> > [You don't often get email from krzysztof.kozlowski@...aro.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > [ EXTERNAL EMAIL ]
> >
> > On 27/12/2024 08:09, Keke Li via B4 Relay wrote:
> > > From: Keke Li <keke.li@...ogic.com>
> > >
> > > c3-mipi-csi2 is used to receive mipi data from image sensor.
> > >
> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> > > Signed-off-by: Keke Li <keke.li@...ogic.com>
> > > ---
> > > .../bindings/media/amlogic,c3-mipi-csi2.yaml | 131 +++++++++++++++++++++
> > > MAINTAINERS | 6 +
> > > 2 files changed, 137 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> > > new file mode 100644
> > > index 000000000000..76b68d1e7316
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> > > @@ -0,0 +1,131 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Amlogic C3 MIPI CSI-2 receiver
> > > +
> > > +maintainers:
> > > + - Keke Li <keke.li@...ogic.com>
> > > +
> > > +description:
> > > + MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
> > > + It receives the MIPI data from the image sensor and sends MIPI data
> > > + to MIPI adapter.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - amlogic,c3-mipi-csi2
> > > +
> > > + reg:
> > > + maxItems: 3
> > > +
> > > + reg-names:
> > > + items:
> > > + - const: aphy
> > > + - const: dphy
> > > + - const: host
> > > +
> > > + power-domains:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + maxItems: 2
> > > +
> > > + clock-names:
> > > + items:
> > > + - const: vapb
> > > + - const: phy0
> > > +
> > > + assigned-clocks: true
> > > +
> > > + assigned-clock-rates: true
> > NAK
> >
> > Adding new properties *INVALIDATES REVIEW*. Otherwise you can sneak
> > whatever crap past reviewers.
> >
> > Drop all new properties and drop my review tag.
>
>
> OK, will drop all new properties and drop your review tag. Thanks
>
Krzysztof why should new properties added in-between two revisions be
dropped ?
I understand the "drop my tag if you make changes" but I don't get why
the newly added properties should be removed.
> >
> > Best regards,
> > Krzysztof
>
Powered by blists - more mailing lists