[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <s3fsc6cp2a7qx5qgo6akneh7l3a5aknzmtzpsq7lvdaleqaupa@6sqgfn4q7olq>
Date: Sat, 15 Feb 2025 06:46:38 +0800
From: Inochi Amaoto <inochiama@...il.com>
To: Alexander Sverdlin <alexander.sverdlin@...il.com>,
Inochi Amaoto <inochiama@...il.com>, devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-rtc@...r.kernel.org
Cc: Jingbao Qiu <qiujingbao.dlmu@...il.com>, alexandre.belloni@...tlin.com,
robh@...nel.org, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
unicorn_wang@...look.com, inochiama@...look.com, paul.walmsley@...ive.com,
palmer@...belt.com, aou@...s.berkeley.edu, dlan@...too.org,
linux-kernel@...r.kernel.org, Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: [PATCH v11 1/3] dt-bindings: rtc: sophgo: add RTC support for
Sophgo CV1800 series SoC
On Fri, Feb 14, 2025 at 12:09:37PM +0100, Alexander Sverdlin wrote:
> Hi Inochi,
>
> On Fri, 2025-02-14 at 17:40 +0800, Inochi Amaoto wrote:
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/interrupt-controller/irq.h>
> > > +
> > > + rtc@...5000 {
> > > + compatible = "sophgo,cv1800-rtc";
> > > + reg = <0x5025000 0x2000>;
> > > + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&osc>;
> > > + };
> > > --
> >
> > Just for curiosity, Do you leave a way to implement the
> > 8051 subsys, since its registers are in rtc. (You can
> > check the chapter "8051 subsystem" of the SG2002, which
> > can be found at https://github.com/sophgo/sophgo-doc).
>
> well, I suppose, you know the answer, according to how this has been modelled
> within this series, all the functionality could only be added on top of RTC
> driver.
I don't think it is a good idea to add everything in the RTC driver.
I prefer to separate them to sub devices if possible, so we can
make full use of all the framework provided.
> Do you think it's time to re-design it as compatible = "syscon", "simple-mfd"
> with children nodes for RTC and reboot?
>
Yes, but you should submit the 8051 and reboot device early, and
change your binding with the right compatible. It is not allowd to
change compatible after the binding is determined.
Regards,
Inochi
Powered by blists - more mailing lists