[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250314065444.fmvhyqmuefnm4mcq@uda0492258>
Date: Fri, 14 Mar 2025 12:24:44 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
CC: Siddharth Vadapalli <s-vadapalli@...com>, <lpieralisi@...nel.org>,
<kw@...ux.com>, <robh@...nel.org>, <bhelgaas@...gle.com>,
<vigneshr@...com>, <kishon@...nel.org>, <cassel@...nel.org>,
<wojciech.jasko-EXT@...tinental-corporation.com>,
<thomas.richard@...tlin.com>, <bwawrzyn@...co.com>,
<linux-pci@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<srk@...com>
Subject: Re: [PATCH 1/4] PCI: cadence: Add support to build pcie-cadence
library as a kernel module
On Thu, Mar 13, 2025 at 11:14:16PM +0530, Manivannan Sadhasivam wrote:
Hello Mani,
> On Fri, Mar 07, 2025 at 04:01:25PM +0530, Siddharth Vadapalli wrote:
> > From: Kishon Vijay Abraham I <kishon@...com>
> >
> > Currently, the Cadence PCIe controller driver can be built as a built-in
> > module only. Since PCIe functionality is not a necessity for booting, add
> > support to build the Cadence PCIe driver as a loadable module as well.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> > Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>
> > ---
> > drivers/pci/controller/cadence/Kconfig | 6 +++---
> > drivers/pci/controller/cadence/pcie-cadence-ep.c | 6 ++++++
> > drivers/pci/controller/cadence/pcie-cadence-host.c | 9 +++++++++
> > drivers/pci/controller/cadence/pcie-cadence.c | 12 ++++++++++++
> > drivers/pci/controller/cadence/pcie-cadence.h | 4 ++--
> > 5 files changed, 32 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
> > index 8a0044bb3989..82b58096eea0 100644
> > --- a/drivers/pci/controller/cadence/Kconfig
> > +++ b/drivers/pci/controller/cadence/Kconfig
> > @@ -4,16 +4,16 @@ menu "Cadence-based PCIe controllers"
> > depends on PCI
> >
> > config PCIE_CADENCE
> > - bool
> > + tristate
> >
> > config PCIE_CADENCE_HOST
> > - bool
> > + tristate
> > depends on OF
> > select IRQ_DOMAIN
>
> Even though this was added earlier, looks like not needed.
Thank you for reviewing this patch.
drivers/pci/controller/cadence/Kconfig has the following:
...
config PCIE_CADENCE_HOST
bool
depends on OF
select IRQ_DOMAIN
select PCIE_CADENCE
...
config PCI_J721E_HOST
bool "TI J721E PCIe controller (host mode)"
depends on ARCH_K3 || COMPILE_TEST
depends on OF
select PCIE_CADENCE_HOST
select PCI_J721E
...
So PCI_J721E_HOST selects PCIE_CADENCE_HOST which in turn selects
PCIE_CADENCE. As of now, none of these configs are enabled in
arm64-defconfig, and they also will not be accepted as built-in modules
as it will bloat the Linux Image for everyone. For that reason, they are
all being converted to loadable modules, and their configs will eventually
be enabled in arm64-defconfig as loadable modules.
Please let me know if I misunderstood your comment regarding the quoted
change not being required.
Regards,
Siddharth.
Powered by blists - more mailing lists