[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKxU2N8uZ+q1aE42+e65tVMr=ji0RTx5wZssFBnQN29OzsFXVA@mail.gmail.com>
Date: Thu, 22 May 2025 17:04:10 -0700
From: Rosen Penev <rosenp@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: linux-wireless@...r.kernel.org, Toke Høiland-Jørgensen <toke@...e.dk>,
Johannes Berg <johannes@...solutions.net>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>, open list <linux-kernel@...r.kernel.org>,
"open list:MIPS" <linux-mips@...r.kernel.org>
Subject: Re: [PATCHv2 4/5] dt-bindings: net: wireless: ath9k: add OF bindings
On Thu, May 22, 2025 at 12:54 PM Krzysztof Kozlowski <krzk@...nel.org> wrote:
>
> On 22/05/2025 20:45, Rosen Penev wrote:
> > Now that support was added to the driver, document it.
>
> That's not appropriate commit msg. Binding must be before the user (see
> submitting patches in DT directory). Describe the hardware, what are you
> adding here.
>
> Subject: OF bindings is redundant. It duplicates dt-bindings. Instead:
> "Add Atheros AR9-foo-bar on AHB bus" or something similar
At this point I wonder if my approach is wrong. The other ath drivers
use a qcom, prefix and a -wifi suffix. Might make sense to do the same
here to avoid typing qca twice.
>
> Missing SoB.
>
> Please run scripts/checkpatch.pl on the patches and fix reported
> warnings. After that, run also 'scripts/checkpatch.pl --strict' on the
> patches and (probably) fix more warnings. Some warnings can be ignored,
> especially from --strict run, but the code here looks like it needs a
> fix. Feel free to get in touch if the warning is not clear.
>
>
>
> > ---
> > .../bindings/net/wireless/qca,ath9k.yaml | 23 ++++++++++++++++++-
> > 1 file changed, 22 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
> > index 0e5412cff2bc..81d00f257922 100644
> > --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
> > +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
> > @@ -12,7 +12,7 @@ maintainers:
> > description: |
> > This node provides properties for configuring the ath9k wireless device.
> > The node is expected to be specified as a child node of the PCI controller
> > - to which the wireless chip is connected.
> > + or AHB bus to which the wireless chip is connected.
> >
> > allOf:
> > - $ref: ieee80211.yaml#
> > @@ -35,6 +35,12 @@ properties:
> > - pci168c,0034 # AR9462
> > - pci168c,0036 # AR9565
> > - pci168c,0037 # AR1111 and AR9485
> > + - qca,ar9130-wmac
> > + - qca,ar9330-wmac
> > + - qca,ar9340-wmac
> > + - qca,qca9530-wmac
> > + - qca,qca9550-wmac
> > + - qca,qca9560-wmac
> >
> > reg:
> > maxItems: 1
> > @@ -88,3 +94,18 @@ examples:
> > nvmem-cell-names = "mac-address", "calibration";
> > };
> > };
> > + - |
> > + apb {
> > + compatible = "simple-bus";
> > + ranges;
> > +
>
> Drop these two.
>
> > + #address-cells = <1>;
> > + #size-cells = <1>;
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists