[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20250618070823.4136687-1-marshall_zhan@wiwynn.com>
Date: Wed, 18 Jun 2025 15:08:22 +0800
From: MarshallZhan-wiwynn <marshall_zhan@...ynn.com>
To: patrick@...cx.xyz
Cc: Marshall Zhan <marshall_zhan@...ynn.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4] ARM: dts: aspeed: yosemite4: add gpio name for uart mux sel
Add gpio line name to support multiplexed console
Signed-off-by: Marshall Zhan <marshall_zhan@...ynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 29f224bccd63..aae789854c52 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -189,6 +189,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+ "SLOT1_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -235,6 +240,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+ "SLOT2_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -281,6 +291,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+ "SLOT3_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -327,6 +342,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+ "SLOT4_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -373,6 +393,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+ "SLOT5_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -419,6 +444,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+ "SLOT6_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -465,6 +495,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+ "SLOT7_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -511,6 +546,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+ "SLOT8_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
--
2.25.1
Powered by blists - more mailing lists