lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250912141436.2347852-2-vincent.guittot@linaro.org>
Date: Fri, 12 Sep 2025 16:14:33 +0200
From: Vincent Guittot <vincent.guittot@...aro.org>
To: chester62515@...il.com,
	mbrugger@...e.com,
	ghennadi.procopciuc@....nxp.com,
	s32@....com,
	lpieralisi@...nel.org,
	kwilczynski@...nel.org,
	mani@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	Ionut.Vicovan@....com,
	larisa.grigore@....com,
	Ghennadi.Procopciuc@....com,
	ciprianmarian.costea@....com,
	bogdan.hamciuc@....com,
	linux-arm-kernel@...ts.infradead.org,
	linux-pci@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 1/4] dt-bindings: pcie: Add the NXP PCIe controller

Describe the PCIe controller available on the S32G platforms.

Co-developed-by: Ionut Vicovan <Ionut.Vicovan@....com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@....com>
Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@....com>
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@....com>
Co-developed-by: Larisa Grigore <larisa.grigore@....com>
Signed-off-by: Larisa Grigore <larisa.grigore@....com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@....com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@....com>
Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@....com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@....com>
Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@....com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@....com>
Signed-off-by: Vincent Guittot <vincent.guittot@...aro.org>
---
 .../devicetree/bindings/pci/nxp,s32-pcie.yaml | 169 ++++++++++++++++++
 1 file changed, 169 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/nxp,s32-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/nxp,s32-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32-pcie.yaml
new file mode 100644
index 000000000000..287596d7162d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nxp,s32-pcie.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nxp,s32-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2xx/S32G3xx PCIe controller
+
+maintainers:
+  - Bogdan Hamciuc <bogdan.hamciuc@....com>
+  - Ionut Vicovan <ionut.vicovan@....com>
+
+description:
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP.
+  The S32G SoC family has two PCIe controllers, which can be configured as
+  either Root Complex or End Point.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,s32g2-pcie     # S32G2 SoCs RC mode
+      - items:
+          - const: nxp,s32g3-pcie
+          - const: nxp,s32g2-pcie
+
+  reg:
+    minItems: 7
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: ctrl
+      - const: config
+      - const: addr_space
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: link_req_stat
+      - const: dma
+      - const: msi
+      - const: phy_link_down
+      - const: phy_link_up
+      - const: misc
+      - const: pcs
+      - const: tlp_req_no_comp
+
+  msi-parent:
+    description:
+      Use this option to reference the GIC controller node which will
+      handle the MSIs. This property can be used only in Root Complex mode.
+      The msi-parent node must be declared as "msi-controller" and the list of
+      available SPIs that can be used must be declared using "mbi-ranges".
+      If "msi-parent" is not present in the PCIe node, MSIs will be handled
+      by iMSI-RX -Integrated MSI Receiver [AXI Bridge]-, an integrated
+      MSI reception module in the PCIe controller's AXI Bridge which
+      detects and terminates inbound MSI requests (received on the RX wire).
+      These MSIs no longer appear on the AXI bus, instead a hard-wired
+      interrupt is raised, documented as "DSP AXI MSI Interrupt" in the SoC
+      Reference Manual.
+
+  nxp,phy-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Select PHY mode for PCIe controller
+    enum:
+      - crns  # Common Reference Clock, No Spread Spectrum
+      - crss  # Common Reference Clock, Spread Spectrum
+      - srns  # Separate reference Clock, No Spread Spectrum
+      - sris  # Separate Reference Clock, Independent Spread Spectrum
+
+  max-link-speed:
+    description:
+      The max link speed is normaly Gen3, but can be enforced to a lower value
+      in case of special limitations.
+    maximum: 3
+
+  num-lanes:
+    description:
+      Max bus width (1 or 2); it is the number of physical lanes
+    minimum: 1
+    maximum: 2
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ranges
+  - nxp,phy-mode
+  - num-lanes
+  - phys
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0: pcie@...00000 {
+            compatible = "nxp,s32g3-pcie",
+                         "nxp,s32g2-pcie";
+            dma-coherent;
+            reg = <0x00 0x40400000 0x0 0x00001000>,   /* dbi registers */
+                  <0x00 0x40420000 0x0 0x00001000>,   /* dbi2 registers */
+                  <0x00 0x40460000 0x0 0x00001000>,   /* atu registers */
+                  <0x00 0x40470000 0x0 0x00001000>,   /* dma registers */
+                  <0x00 0x40481000 0x0 0x000000f8>,   /* ctrl registers */
+                  /* RC configuration space, 4KB each for cfg0 and cfg1
+                   * at the end of the outbound memory map
+                   */
+                  <0x5f 0xffffe000 0x0 0x00002000>,
+                  <0x58 0x00000000 0x0 0x40000000>; /* 1GB EP addr space */
+                  reg-names = "dbi", "dbi2", "atu", "dma", "ctrl",
+                              "config", "addr_space";
+                  #address-cells = <3>;
+                  #size-cells = <2>;
+                  device_type = "pci";
+                  ranges =
+                  /* downstream I/O, 64KB and aligned naturally just
+                   * before the config space to minimize fragmentation
+                   */
+                  <0x81000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>,
+                  /* non-prefetchable memory, with best case size and
+                  * alignment
+                   */
+                  <0x82000000 0x0 0x00000000 0x58 0x00000000 0x7 0xfffe0000>;
+
+                  nxp,phy-mode = "crns";
+                  bus-range = <0x0 0xff>;
+                  interrupts =  <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+                                <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+                  interrupt-names = "link_req_stat", "dma", "msi",
+                                    "phy_link_down", "phy_link_up", "misc",
+                                    "pcs", "tlp_req_no_comp";
+                  #interrupt-cells = <1>;
+                  interrupt-map-mask = <0 0 0 0x7>;
+                  interrupt-map = <0 0 0 1 &gic 0 0 0 128 4>,
+                                  <0 0 0 2 &gic 0 0 0 129 4>,
+                                  <0 0 0 3 &gic 0 0 0 130 4>,
+                                  <0 0 0 4 &gic 0 0 0 131 4>;
+                  msi-parent = <&gic>;
+
+                  num-lanes = <2>;
+                  phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
+        };
+    };
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ