Message-ID: <76bbww3gsb2w47h27jrs5z32bdtxf2r4hwce3g4sbtjo232tov@yx3pripyve55>
Date: Fri, 26 Sep 2025 00:06:36 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Pankaj Patil <pankaj.patil@....qualcomm.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Jyothi Kumar Seerapu <jyothi.seerapu@....qualcomm.com>,
        Maulik Shah <maulik.shah@....qualcomm.com>,
        Sibi Sankar <sibi.sankar@....qualcomm.com>,
        Taniya Das <taniya.das@....qualcomm.com>,
        Taniya Das <taniya.das@...lcomm.com>,
        Kamal Wadhwa <kamal.wadhwa@....qualcomm.com>,
        Prudhvi Yarlagadda <quic_pyarlaga@...cinc.com>,
        Qiang Yu <qiang.yu@....qualcomm.com>,
        Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@....qualcomm.com>,
        Wesley Cheng <wesley.cheng@....qualcomm.com>
Subject: Re: [PATCH v2 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and
 Glymur CRD dts

On Thu, Sep 25, 2025 at 11:58:06AM +0530, Pankaj Patil wrote:
> Introduce dt-bindings and initial device tree support for Glymur, 
> Qualcomm's next-generation compute SoC and it's associated 
> Compute Reference Device (CRD) platform.
> 
> https://www.qualcomm.com/products/mobile/snapdragon/laptops-and-tablets/snapdragon-x2-elite
> https://www.qualcomm.com/news/releases/2025/09/new-snapdragon-x2-elite-extreme-and-snapdragon-x2-elite-are-the-
> 
> The base support enables booting to shell with rootfs on NVMe,
> demonstrating functionality for PCIe and NVMe subsystems.
> DCVS is also enabled, allowing dynamic frequency scaling for the CPUs.
> TSENS (Thermal Sensors) enabled for monitoring SoC temperature and
> thermal management. The platform is capable of booting kernel at EL2
> with kvm-unit tests performed on it for sanity.
> 
> Features enabled in this patchset:
> 1. DCVS: CPU DCVS with scmi perf protocol
> 2. PCIe controller and PCIe PHY
> 3. NVMe storage support
> 4. Clocks and reset controllers - GCC, TCSRCC, DISPCC, RPMHCC
> 5. Interrupt controller
> 6. TLMM (Top-Level Mode Multiplexer)
> 7. QUP Block
> 8. Reserved memory regions
> 9. PMIC support with regulators
> 10. CPU Power Domains
> 11. TSENS (Thermal Sensors)
> 12. Remoteproc - SOCCP, ADSP and CDSP
> 13. RPMH Regulators
> 14. USB 
> 
> Dependencies:
> 
> dt-bindings:
> 1. https://lore.kernel.org/all/20250918140249.2497794-1-pankaj.patil@oss.qualcomm.com/
> 2. https://lore.kernel.org/all/20250918141738.2524269-1-pankaj.patil@oss.qualcomm.com/
> 3. https://lore.kernel.org/all/20250919133439.965595-1-pankaj.patil@oss.qualcomm.com/
> 4. https://lore.kernel.org/all/20250919140952.1057737-1-pankaj.patil@oss.qualcomm.com/
> 5. https://lore.kernel.org/all/20250919141440.1068770-1-pankaj.patil@oss.qualcomm.com/
> 6. https://lore.kernel.org/all/20250919142325.1090059-1-pankaj.patil@oss.qualcomm.com/
> 7. https://lore.kernel.org/all/20250920113052.151370-1-pankaj.patil@oss.qualcomm.com/
> 8. https://lore.kernel.org/all/20250924-knp-pmic-binding-v1-1-b9cce48b8460@oss.qualcomm.com/
> 9. https://lore.kernel.org/linux-arm-msm/20250924183726.509202-1-sibi.sankar@oss.qualcomm.com/T/#m46501fe9edb880fc11f69442eaf4d2855f7e4608
> 10. https://lore.kernel.org/linux-arm-msm/20250925002034.856692-1-sibi.sankar@oss.qualcomm.com/
> 11. https://lore.kernel.org/linux-arm-msm/20250924144831.336367-1-sibi.sankar@oss.qualcomm.com/

You got the feedback and ignored it. Should I ignore your patchset in
response?

> 
> rpmh-regulators:
> 1. https://lore.kernel.org/all/20250918-glymur-rpmh-regulator-driver-v3-0-184c09678be3@oss.qualcomm.com/
> 
> PMICs:
> 1. https://lore.kernel.org/linux-arm-msm/20250924-knp-dts-v1-0-3fdbc4b9e1b1@oss.qualcomm.com/ (Patch 8-11)
> 
> PMIC-Glink:
> 1. https://lore.kernel.org/all/20250919175025.2988948-1-anjelique.melendez@oss.qualcomm.com/
> 2. https://lore.kernel.org/all/20250924232631.644234-1-anjelique.melendez@oss.qualcomm.com/
> 
> spmi/pinctrl:
> 1. https://lore.kernel.org/all/20250920-glymur-spmi-v8-gpio-driver-v1-0-23df93b7818a@oss.qualcomm.com/
> 
> PCI:
> 1. https://lore.kernel.org/all/20250903-glymur_pcie5-v4-0-c187c2d9d3bd@oss.qualcomm.com/
> 
> Remoteproc:
> 1. https://lore.kernel.org/all/20250819165447.4149674-1-mukesh.ojha@oss.qualcomm.com/
> 2. https://lore.kernel.org/linux-arm-msm/20250924-knp-remoteproc-v1-0-611bf7be8329@oss.qualcomm.com/T/#t
> 3. https://lore.kernel.org/linux-arm-msm/20250924-knp-remoteproc-v1-0-611bf7be8329@oss.qualcomm.com/T/#t
> 
> USB:
> 1. https://lore.kernel.org/all/20250925005228.4035927-1-wesley.cheng@oss.qualcomm.com/T/#mb7879fdba16496554a53c3726d90f94b6063dd09
> 
> Linux-next based git tree containing all Glymur related patches is available at:
> https://git.codelinaro.org/clo/linux-kernel/kernel-qcom/-/tree/glymur?ref_type=heads
> 
> Signed-off-by: Pankaj Patil <pankaj.patil@....qualcomm.com>
> ---
> Changes in v2:
> - EDITME: describe what is new in this series revision.
> - EDITME: use bulletpoints and terse descriptions.

Nice. Any reason for ignoring b4 telling you to edit the cover letter?

Please actually describe your changes in the changelog.

> - Link to v1: https://lore.kernel.org/r/20250925-v3_glymur_introduction-v1-0-5413a85117c6@oss.qualcomm.com

No, it is not. Something went wrong and this is not a correct URL.
Please make sure that v3 gets a correct one.

> 
> ---
> base-commit: fdcd2cfdf0db0a8b8299de79302465f790edea27
> change-id: 20250923-v3_glymur_introduction-e22ae3c868a2

And no dependencies here. Please stop and instead of sending v3 learn
how to use the tools and how to interact with the community.

-- 
With best wishes
Dmitry

Powered by blists - more mailing lists